• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.903-910
• /
• 2015

The purpose of this research is to develop a full-spectral fatigue analysis program, based on rigid-body ship motion analysis, in order to perform a full-spectral fatigue analysis that considers hydroelasticity effects. To gain credibility, fatigue analysis results of two ship types, performed by the developed program, were compared with those of a classification society, and it was found that both are identical. Full-spectral fatigue analysis considering hydroelasticity effects would be developed in further studies by including flexible-body ship motion analysis results and by supplementing the developed program with a wide-band fatigue damage model.

• Geomechanics and Engineering
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2022

Seismic ground response evaluation is one of the main issues in geotechnical earthquake engineering. These analyses are subsequently divided into one-, two- and three-dimensional methods, and each of which can perform in time or frequency domain. In this study, a novel approach is proposed to assess the seismic site response using two-dimensional transfer functions in frequency domain analysis. Using the proposed formulation, a program is written in MATLAB environment and then promoted utilizing the equivalent linear approach. The accuracy of the written program is evaluated by comparing the obtained results with those of actual recorded data in the Gilroy region during Loma Prieta (1989) and Coyote Lake (1979) earthquakes. In order to precise comparison, acceleration time histories, Fourier amplitude spectra and acceleration response spectra diagrams of calculated and recorded data are presented. The proposed 2D transfer function diagrams are also obtained using mentioned earthquakes which show the amount of amplification or attenuation of the input motion at different frequencies while passing through the soil layer. The results of the proposed method confirm its accuracy and efficiency to evaluate ground motion during earthquakes using two-dimensional model. Then, studies on irregular topographies are carried out, and diagrams of amplification factors are shown.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.457-466
• /
• 2017

The present study is to observe changes of health promoting behaviors of obese women by applying 8 weeks of motion-beat on rhythm exercise program. The effects of the obese women's motion-beat in rhythm exercise were summarized in the following conclusions: For changes in their health promoting behaviors, according to the application of motion-beat to the eight-week rhythm exercise, it was noted that the application of motion-beat was effective in the factor of stress management. Therefore, since the exercise applying motion-beat maximizes fun and interest, it has been developed as a program on sports for all, appropriate and efficient for obese women, and it is expected that positive changes in health promoting behaviors can be suggested as a measure for the facilitation of their continuous participation in the exercise.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.369-375
• /
• 2016

Objective: The purpose of this study was to investigate the possibility of injuries and the types of movement related to damage by body parts, and to prepare for prevention of injuries and development of a training program. Method: For this study, the experiment was conducted according to levels of 60 percentages (ST) and 85 percentages (MA) and 10 subjects from the Korean elite national weightlifting team were included. Furthermore, we analyzed joint moment and muscle activation pattern with three-dimensional video analysis. Ground reaction force and EMG analyses were performed to measure the factors related to injuries and motion. Results: Knee reinjuries such as anterior cruciate ligament damage caused by deterioration of the control ability for the forward movement function of the tibia based on the movement of the biceps femoris when the rectus femoris is activated with the powerful last-pull movement. In particular, athletes with previous or current injuries should perceive a careful contiguity of the ratio of the biceps femoris to the rectus femoris. This shows that athletes can exert five times greater force than the injury threshold in contrast to the inversion moment of the ankle, which is actively performed for a powerful last pull motion and is positively considered in terms of intentional motion. It is activated by excessive adduction and internal rotation moment to avoid excessive abduction and external rotation of the knee at lockout motion. It is an injury risk to muscles and ligaments, causing large adduction moment and internal rotation moment at the knee. Adduction moment in the elbow joint increased to higher than the injury threshold at ST (60% level) in the lockout phase. Hence, all athletes are indicated to be at a high risk of injury of the elbow adductor muscle. Lockout motion is similar to the "high five" posture, and repetitive training in this motion increases the likelihood of injuries because of occurrence of strong internal rotation and adduction of the shoulder. Training volume of lockout motion has to be considered when developing a training program. Conclusion: The important factors related to injury at snatch include B/R rate, muscles to activate the adduction moment and internal rotation moment at the elbow joint in the lockout phase, and muscles to activate the internal rotation moment at the shoulder joint in the lockout phase.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.1
• /
• pp.119-128
• /
• 2022

Purpose : The purpose of this study was to examine the effects of applying occupational therapy that uses motion recognition on the physical self-efficacy, visual-motor integration ability, and play skills of children who have neurodevelopmental disorder before and after treatment. Methods : This The study chose 16 children with neurodevelopmental disorder as research subjects who were randomly and evenly allocated into an experimental group and a control group. The experiment followed a pretest-posttest design. As an intervention, the experimental group received motion recognition-based occupational therapy and a separate sensory integration program. The control group only participated in the separate sensory integration program. The eight-week experiment duration included 24 intervention sessions where the a 50-minute session was implemented three times a week for eight weeks. To compare the physical self-efficacy, visual-motor integration ability, and play skills before and after the intervention, measurement tools including the Physical self efficacy, Beery VMI-6, and Penn interactive peer play scale were used. All measured variables were analyzed and expressed as mean, standard deviation and percentage. Results : The motion recognition-based occupational therapy demonstrated a significant effect on improving the physical self-efficacy, visual-motor integration ability, and play skills of the experimental group. The intervention also caused a significant difference between the experimental group and control group in terms of the physical self-efficacy, visual-motor integration ability, and play skills. Conclusion : We confirmed the possibility motion recognition-based occupational therapy could be effective in improving the physical self-efficacy, visual-motor integration ability, and play skills for patients who have neurodevelopmental disorder. Based on the study result, further future studies are expected based on this study result that prove the application effect of the motion recognition-based occupational therapy using disabled and non- disabled children as subjects are expected in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1158-1161
• /
• 2004

This paper describes the construction of a half sphere screen driving tilting simulator that can perform six degree-of-freedom (DOF) motions simulator to a tilting train. The mathematical equations of Tilting Train dynamics are first derived from the 6-DOF bicycle model and incorporated with the bogie, carbody, and suspension subsystems. The equations of motion are then programmed by visual C++ code. To achieve the simulator functions, a motion platform that is constructed by six electric-driven actuators is designed, and its kinetics/inverse kinetics analysis is also conducted. Driver operation signals such as carbady angle, accelerator, and tilting positions are measured to trigger the Tilting dynamics calculation and further actuate the cylinders by the motion platform control program. In addition, a digital PID controller is added to achieve the stable and accurate displacements of the motion platform. The experiments prove that the designed simulator is adequate in performing some special rail road driving situations discussed in this paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.948-953
• /
• 2004

For stable walking of various biped walking robots(BWR), we need to know the kinematics, dynamics and the Zero Moment of Point(ZMP) which are not easy to analyze analytically. In this reason, we developed a simulation program for BWRs composed of 4 degree-of-freedom upper-part body and 12 degree-of-freedom lower-part of the body. To operate the motion simulator for analyzing the kinematics and dynamics of BWES, inputs for the distance between legs, base angle, choice of walking type, gaits, and walking velocity are necessary. As a result, if stability condition is satisfied by the simulation, angle data for each actuator are generated automatically, and the data are transmitted to BWRS and then, they are actuated by the motion data. Finally, we validate the performance of the proposed motion simulator by applying it to a constructed small sized BWR.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.60-65
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2266-2273
• /
• 2000

Equations of motion of a multi-beam system undergoing overall rigid body motion are derived by employing finite element method. An orientation angle is employed to allow the arbitrary orientation o f the beam element. Modal coordinate reduction technique, which has been successfully utilized in the conventional linear modeling method, is employed for the present modeling method to reduce the computational effort. Different from the conventional linear modeling method, the present modeling method captures the motion-induced stiffness variations which are important for the dynamic analysis of structures undergoing overall rigid body motion. The numerical results are compared to those of a commercial program to verify the reliability of the present method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.22-33
• /
• 1993

A theoretical analysis of predicting the detailed motion of a piston-crank mechanism within piston-guide clearance is presented, and the analysis is applied to the piston motion in a gasoline engine. A piston movement program is developed to calculate the piston attitude relative to the bore, the piston to bore impact velocity and kinetic energy loss and the net transverse force acting on the piston. This paper presents the formulation of a set of differential equations governing the transverse and rotational motion of a piston. These equations of motion were solved by well established Runge-Kutta method. As a result of this study, it is possible to predict the effects of piston geometry and piston pin offset on a piston motion and kinetic energy loss.