• IE interfaces
• /
• v.15 no.3
• /
• pp.270-278
• /
• 2002

Product Liability(PL) is a legal policy to deal with global competition by improving domestic industrial competitive power and to reduce the cost of defect products. The purpose of this paper is to address the state of the art solutions to dispute on PL, in reality of a frequent occurrence of global product exchange focussing on product safety that is one of the most important functions of PL and to improve solution of the product safety and reliability responsive to PL. To minimize PL exposure, manufacturers should reflect comprehensive product safety and reliability concepts in establishing PL prevention policies. Total PL prevention policies are composed of total quality management and product safety management system in respect of safety design, risk, and reliability. These PL prevention activities should be performed consistently during the total product life cycle, especially product research and development periods.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.6
• /
• pp.216-226
• /
• 2005

Pb-Free Technology was born with environmental problems of electronic component, Being connected by big and small project of every country. Also, in each country environment is connected and various standards of IEC, ISO, MIL, JIS, KS, JEDEC, EIAJ etc. All products can divide at solder part and finishing part These can tested each and synthetically divide. This research is reliability evaluation for three kind of ph-free SnCu solder plating solution and it's deposit. First, executed analysis about Pure Sn, SnCu solutions and plating surface by way similar to other plating solution analysis. Next, executed reliability about test method and equipment for reliable analyzer system construction. Next, data comparison and estimation, main estimation test method and item's choice. In this paper the systematic surface analysis and reliability for plating solutions and it's deposit in metal surface finishing processes could be shown.

• Journal of Applied Reliability
• /
• v.13 no.2
• /
• pp.87-98
• /
• 2013

Accelerated degradation tests (ADTs) measuring failure-related degradation characteristic at the accelerated condition are widely used to assess the reliability of highly reliable products. Often, however, little degradation could be observed even in single-stress ADTs due to the high reliability of test unit, and as a result poor estimate of the reliability may be obtained. ADTs with multiple stress variables can be employed to overcome such difficulties. In this paper, optimal ADT plans with two stress variables are developed assuming that the degradation characteristic follows Weibull distribution by determining the stress levels, the proportion of test units allocated to each stress level such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.14-21
• /
• 2011

Reliability means that a product maintains its initial quality and performance at certain period of time(time, distance, cycle etc) under given condition without failure. Given conditions include both environmental condition and operating condition. Environmental condition means common natural environment such as temperature, humidity, vibration, and working condition means artificial environment such as voltage, current load, install place, hours of use, which occurs during using the product. In the field of railway vehicles, although components of railway vehicles with reliability are the trend of mandatory as persisting period of railway vehicles is extended, using components of railway vehicles is insufficient for the practical reliability assessment. but the meaning of the first railway operating agnecy to acquire the parts in the field, the data suggest the reliability of products if you can and can show the reliability of modular units and modular units can provide the reliability of if you can present reliability of the entire system is thought to be here. In this study, lifespan of micro-switch for master controller is analyzed and prediction is performed based on its field data considering the special circumstances of railway vehicles operating agency, such as a large number of trains operates on the same line.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.57-69
• /
• 2011

Reliability means that a product maintains its initial quality and performance at certain period of time(time, distance, cycle etc) under given condition without failure. Given conditions include both environmental condition and operating condition. Environmental condition means common natural environment such as temperature, humidity, vibration, and working condition means artificial environment such as voltage, current load, install place, hours of use, which occurs during using the product. In the field of railway vehicles, although components of railway vehicles with reliability are the trend of mandatory as persisting period of railway vehicles is extended, using components of railway vehicles is insufficient for the practical reliability assessment. but the meaning of the first railway operating agency to acquire the parts in the field, the data suggest the reliability of products if you can and can show the reliability of modular units and modular units can provide the reliability of if you can present reliability of the entire system is thought to be here In this study, lifespan of micro-switch for master controller is analyzed and prediction is performed based on its field data considering the special circumstances of railway vehicles operating agency, such as a large number of trains operates on the same line.

• International Journal of Reliability and Applications
• /
• v.1 no.1
• /
• pp.89-104
• /
• 2000

Accelerated testing consists of a variety of test methods for shortening the life of products or hastening the degradation of their performance. This paper presents practical, modern statistical methods for evaluating the reliability of Nickel-Cadmium batteries at their design temperature of 2$0^{\circ}C$ by accelerated life test. Batteries have been life tested at three high temperature conditions, 50, 60, 7$0^{\circ}C$, respectively to yield failures quickly. The failures have been observed and judged by means of charge and discharge current integration. Analyses of life data from those conditions resulted in the Weibull distribution, which has been verified on the ground of the Kolmogorov-smirnov test and the pairwise t-test. Life data are modeled according to the Arrhenius life-temperature relationship. The mean life of tested batteries is assessed at about 590 cycles, and the activation energy of this chemical reaction is concluded to be 0.39eV as results. This study provides procedures for estimating the reliability of batteries in a short period, which has little been possible in domestic industries. The results can be applied in many fields such as proof testing, acceptance testing, and estimating assurance periods.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.732-738
• /
• 2006

This research provides a scheme for Highly Accelerated Stress Test that is necessary to demonstrate reliability prediction of Korean Rapid Transit Railway Train Control System sub-equipment, which is calculated by a relevant standard for failure rate prediction of electronic products. Although determining failure information generated in the process of trial running by statistic analysis is widely accepted as a measure of confirmation for reliability prediction, this research suggests the modeling for System Life Test determined by accelerating stress factors as a measure of confirmation for reliability prediction of sub-equipment unit that is generated ahead of a trial running in System Life Cycle. Consequently, the research demonstrates sub-equipment unit reliability test, which is based on the model derived from Accelerated Stress Test, according to accuracy level and the number of samples, and conducts an official experiment by making out a reliability test procedure sheet based on test time as well.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.854-872
• /
• 2016

The purpose of this paper is to examine the effect that Chinese tourists' perceptions of beauty products and their friendliness toward Korean culture have on beauty tourism, particularly on Chinese tourists' intent to purchase, re-purchase, and recommend beauty products. Between the 10th and 21st of June, 2016, a total of 277 questionnaires were distributed in Seoul, Busan, and Daegu using SPSS 21.0. Cronbach's ${\alpha}$ was undertaken to test the reliability of the questions and an analysis of the frequency, factors, t-test, and Sobel test used in the study. Korean beauty was derived from two factors: "product favorability" and "product excellence and credibility." Product favorability had a significant effect on the intent to purchase, as did participants' friendliness toward Korean culture. Re-purchases and the intent to recommend beauty products were also significantly affected. In the relationship between the perception of beauty products and the intent to purchase, the study revealed partial mediation effects of the participants' friendliness toward Korean culture on product favorability and complete mediation effects on product excellence and credibility. Friendliness toward Korean culture had partially mediated the effect that product favorability had on the intent to re-purchase and recommend. Tourists' friendliness toward Korean culture had complete mediation on the effect that product excellence and credibility had on the intent to re-purchase and recommend. According to the Gender Equality and Family Act, the difference between buying and selling beauty depends on the difference between purchase and intentions. Friendliness toward Korean culture has become an important variable thanks to product superiority and reliability.

• Human Ecology Research
• /
• v.60 no.4
• /
• pp.645-665
• /
• 2022

This study aimed to understand the effect of the characteristics of the influencer of public officials and the characteristics of internet live broadcasting in China on the brand image of local agricultural products, purchase intention, and word-of-mouth intention. A survey was administered to Chinese consumers who had purchased local agricultural products after watching live broadcasts on the internet by influencers of government officials. A total of 317 questionnaires were collected and the data were analyzed using SPSS 26.0 and AMOS 28.0. The key results were as follows. First, regarding the characteristics of the influencer of public officials, reliability, attractiveness, and expertise had a positive effect on the brand image of local agricultural products. Second, among the characteristics of internet live broadcasting, interaction and information had a positive effect on the brand image of local agricultural products, but entertainment did not. Third, the brand image of local agricultural products had a positive effect on purchase intention and word-of-mouth intention. Finally, the mediating effect of local agricultural brand image was evident in the reliability, attractiveness, and expertise characteristics of the influencer of public officials and purchase intention and word-of-mouth intention. Finally, the mediating effect of local agricultural brand image was evident in the interaction and information characteristics of internet live broadcasting and purchase intention and word-of-mouth intention.

• Journal of Applied Reliability
• /
• v.6 no.3
• /
• pp.205-212
• /
• 2006

The purpose of this article is about the accelerated product-reliability-test method of the changing colors of mobile products, which are majorly from the frequent touching of sweating fingers. Such problems of changing colors of mobile products have found mostly In metallic paint containing aluminum paste pigments. Also we found that the color of Al Paste is changed by human sweat. Therefore, the accelerated experimental method has been tested as follow: applying the various concentration of lactic acid, which is the changing color components from human sweat, and deeping the testing sample under temperature of $60^{\circ}C$ in dilutelactic acid with water. From the series of tests, the most optimum concentration of lacticacid has been obtained in 10wt% and the sample is observed to be almost same effect as natural changing of colors by human touching after the test. It has been also confirmed from the cross-sectional analysis. In detail, the testing sample has changed its color in 48hr by changing color effect of Alpaste with 10 wt% of lactic acid, and the digit of $\Delta$ E has measured 10.9 after the test.