This study is aimed to figure out the productivity and variability of cage-aquaculture changes. According to the analysis, the productivity of major fish species has been increasing, except mullet. Although the regional productivity has decreased in the last two years, it has been on the rise considering as a whole. Gyeongsangnam-do showed the highest level of productivity by region. Productivity by species was also higher than other regions in the cases of rock fish, mullet and sea bream followed by productivity of Chungcheongnam-do. The production of marine cage-culture in Jeollanam-do is the second largest in Korea in value/weight while its productivity is lower than that of Chungcheongnam-do. When it comes to comparison by region, Gyeongsangnam-do shows the lowest productivity variation. And Jeollanam-do shows the second-lowest variation in productivity that is only about half of that of Chungcheongnam-do province. Thus, it is found that Jeollanam-do region has an advantage in management stability while its productivity is low. On the other hand, productivity by species was also analyzed. Gyeongsangnam-do has the highest productivity by species for rock fish, mullet and sea bream whereas rock bream productivity is the highest in Jeollanam-do. Therefore, it probably needs to reflect these results when choosing regional-focused incubation fish species.
Productivity of public organizations was far older due to issue more difficult to measure than private organizations. Unlike the private sector, the public sector is a diverse and sometimes conflicting objectives (efficiency, effectiveness, equity, democracy, etc.) exist, it is difficult to measure productivity in a single index. Many departments of government is intricately interrelated and sometimes produced by the joint efforts, it is difficult to allocate performance, incentives and accountability to among departments. And there is the difficulty of collecting data on the productivity indicators of public organizations. Despite these difficulties, we developed a productivity index system and measuring method to systematically introduce the concept of productivity in the local administration. In this paper, the productivity and the productivity index measurement practices of local governments conducted annually from 2011 on was deep into research. First, the report found examples of the governments of the developed countries, productivity measurement, then the way MOPAS(Ministry of Public Administration and Security) measure productivity index of local governments, success factors, the implications were in-depth analysis. Finally, in order to enhance productivity and competitiveness municipalities studied ways to take advantage of the productivity index.
Purpose - This study examined the effect of tariff cuts on productivity in Korea's manufacturing industries and the effect of initial productivity level before tariff cuts on productivity improvement after tariff cuts. We also attempted to identify whether import-driven or export-driven factors are more important for productivity improvement, especially in low productivity industries. Design/methodology - Since tariff reduction is a policy decision that can affect cross-industry, its impact is spread across all industries beyond the scope of a single firm through the input and output network of industry structure. Accordingly, we proposed a new method to measure the change in productivity to reflect the impact of tariff cuts across industries. Through an Armington CGE analysis, changes in endogenous variables can be directly measured after the exogenous shock of tariff reduction, and the amount of movements in productivity triggered by tariff cuts can also be calculated. We can thus assess the effectiveness of exogenous policy, such as tariff cuts, through the difference between the benchmark and counterfactual values of endogenous variables. Findings - This study confirmed that tariff reduction positively affected productivity improvement in Korea's manufacturing industries. It also confirmed that productivity gains occur in Korea's leading export industries. Finally, greater productivity gains were recorded in the group with additional high-export-share or high-import-share conditions for low productivity industries. These results are, in a limited sense, consistent with the existing studies that emphasize the importance of exports and imports on productivity improvement, especially for low productivity industries. Originality/value - The results of our experiments are different from those of non-CGE studies, which measure the industry-level change in productivity with dummy coefficients, in terms of directly calculating the amount of change in productivity. In addition, we propose that the Armington CGE model is more appropriate than the Melitz CGE model to directly measure the productivity after tariff cuts. This is because the Melitz CGE model assumes the given specific productivity density, which does not change after an overall drop of tariffs. To the best of our knowledge, this approach to directly calculating productivity by reflecting the impact of tariff reduction across industries through CGE analysis, is unprecedented in this literature.
The purpose of this study is to analyze the difference of productivity according to environmental factors among 25 Regional base public hospitals. Also this study is to propose a method to improve the productivity of Regional base public hospitals in the future by improving the public performance and stable management performance by studying the productivity variables affecting profitability. The survey period was based on the last three years, and 25 Regional base public hospitals were selected for the survey. The dependent variable is the total capital medical marginal profitability and the medical profit marginal profitability which are the indicators of profitability. The independent variable, productivity, is classified into three indicators: capital productivity, labor productivity, and value added productivity. The ANOVA analysis method was used to analyze the productivity difference according to the frequency factor and the environmental factors of the Regional base public hospitals. Finally, we conducted a hierarchical regression analysis to examine the productivity variables affecting profitability. The results of this study showed that there were differences in productivity due to environmental factors such as hospital size, competition in the local medical market, and differences in management performance. The difference in productivity and profitability depending on the environmental factors suggests that it is difficult for Regional base public hospitals in each regional base to perform a balanced public service. In order to overcome this, it is necessary to provide balanced medical services such as government financial support expansion, regional medical demand forecasting and facility infrastructure construction.
This study determines whether or not firms can achieve high productivity growth through external technology acquisition. It also identifies the key factors affecting adopting firms' productivity growth by employing the Malmquist productivity index (MPI) methodology, which features computational ease, low data dependency, and decomposition of productivity growth into technical efficiency change and technical change. Results showed that the effects of productivity growth arising from technology transfer became stronger over time. Moreover, patent transfer guaranteed firms' productivity growth, but no evidence was found that factors such as age and size could increase productivity. Finally, cultural similarity could be another factor conditioning the effectiveness of technology transfer in the productivity of adopting firms.
This paper analyzes the impact of the recent change in global value chain on the productivity of manufacturing sectors and firms in Chungnam area using ADB MRIO. Forward participation significantly increases sector productivity in Chungnam area and backward participation affects the sector productivity after 2015. In the analysis for firm productivity in Chungnam area, GVC participation does not enhance the productivity of firms in Chungnam area. However, firms in the top 25% of productivity in 2007 improved their productivity with higher GVC participation and the productivity of firms in the top 25% of asset in 2007 was positively affected by forward pariticipation and negatively affected by backward participation. The productivity of firms that were in international market in 2007 was significantly worsened by GVC participation.
생산성은 모든 생산 활동의 효율을 측정하는 중요 지표로서 건설업에서 역시 매우 중요한 요소라 할 수 있다. 그럼에도 불구하고 건설업의 생산성 영향요인에 대한 체계적인 분류와 정의가 미흡한 실정으로 생산성 관리 역시 경험과 직판에 의존하는 경우가 대부분인 현실이다. 건설 생산성 데이터 수집 및 분석에 대한 연구들이 현재까지 진행되어 왔으나 건설 생산성과 생산성 영향요인간의 객관적인 관계 분석이 이루어지지 못하고 있으며 이로 인해 생산성 저하 및 향상 원인을 규명하는데 어려움을 겪고 있다. 이러한 문제를 해결하기 위해서는 생산성 영향요인 관련 정보의 수집 및 관리가 이루어져야 한다. 따라서 본 연구에서는 효과적인 생산성 정보 관리를 위하여 기존 문헌 고찰 및 전문가 인터뷰를 동하여 프로젝트 관점, 관리적 관점, 작업 관점의 생산성 영향요인을 정의하여 세 가지 관점의 특성별로 생산성 영향요인을 분류하였다.
Each company is more interested in the productivity to achieve cost reduction and profit maximization through productivity improvement. With this trend, we show the method to measure productivity using TPM(Total Productivity Model) which considers all the input factors of the company instead of using partial productivity such as labor and/or capital productivity We also examine the relation of productivity versus output, profit versus output and profit versus productivity of the case company by actually applying the TPM and suggest the optimal level of profit and output for this company.
The 9th International Conference on Construction Engineering and Project Management
/
pp.632-639
/
2022
The objective of this study is to analyze the productivity, efficiency, and factors affecting the productivity of a spray task from an international airport project. The study is focused on the productivity analysis of the Subcontractor whose job was to supply and apply sprayed-applied fire-resistive material (SFRM) on steel members to achieve the necessary fire ratings on the building structures of the Hamad International Airport, Qatar. The study analyzed the productivity of the four sprayer teams who completed the task at three locations and three areas of the airport. The study found that the productivity of the individual team observed during the SFRM spray task was not only different but was also observed different when they worked at varying floor heights where different factors affecting productivity were predominant. The study found that the efficiency was lowest (47.32%) when the spray team had to work at second-floor heights and factors affecting productivity such as limited accessibility for material movement and lifting, site congestion, lack of continuity of operation due to priority areas and frequent re-handling of machines and tools were present. Besides, the factors such as adverse weather conditions and sub-trades interference affected productivity at all locations. The findings show that productivity depends on multiple factors and those factors need to be identified and addressed to improve productivity. The findings also show that the estimated efficiency was hard to achieve but possible since Team 4 had 97% efficiency on the first floor of the airport.
Byungki Kwon;Hyun-soo Lee;Moonseo Park;Hyunsoo Kim
국제학술발표논문집
/
The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
/
pp.58-65
/
2011
Construction Productivity is one of the most important elements in construction management. It is used in construction process scheduling and cost management, which are significant sector in construction management. It is important to make appropriate schedule and monitor how works are done within schedule. But construction project contains uncertainty and inexactitude, modifying construction schedule is being an issue to manage construction works well. Even though prediction and monitoring of productivity can be principal activity, it is hard to predict productivity with manager's experience and a standard of estimate. A large number of factors influencing productivity, such as drawing, construction method, weather, labor, material, equipment, etc. But current calculation of productivity depends on empirical probability, not consider difference of each influencing factor. In this research, the aim is to present a productivity predicting regression model of form work, which includes effectiveness of influences factors. 5 variables existed inside form work are selected by interview and site research based on literature review of existed various productivity influencing factors. The effectiveness and correlation of productivity influencing factors are analyzed by statistical approach, and it is used to make productivity regression model. The finding of this research will improves monitoring and controlling of project schedule in construction phase.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.