• 대한안전경영과학회지
• /
• 제11권4호
• /
• pp.193-199
• /
• 2009

Recently, an industrial production-distribution planning problem has been widely investigated in Supply Chain Management(SCM). One of the key issues in the current SCM research area is reverse logistics network. This study have developed a simulation model for the reverse logistics network. The simulation model analysis reverse logistics network issues such as inventory policy, manufacturing policy, transportation mode, warehouse assignment, supplier assignment. Computational experiments using commercial simulation tool ARENA show that the real problems. The model can be used to decide an appropriate production-distribution planning problem in the research area.

• 대한산업공학회지
• /
• 제26권1호
• /
• pp.17-26
• /
• 2000

This paper presents an integrated order scheduling method with the improved DRP concept for multi-echelon distribution system that has the constraint of limited production capacity of producers. The proposed method reflects the dynamic characteristics of inventory level changes in the regional and central distribution center. The simulation is done with two models : the traditional DRP method and the proposed method presented in this paper. From the results, the latter is more efficient than the former in cost, customer's service level as well as balanced production load on each producer.

• 수산해양교육연구
• /
• 제19권1호
• /
• pp.101-109
• /
• 2007

The school system of fisheries high school was proper to specialist objective school system in order to training for expert human resource development.Training a field of human resources development from fisheries high school is fallow; fisheries production, seamen's training, ship engine and refrigerator, marine electronic telecommunication and information, fisheries foods production and fisheries foods production and distribution, fishery fisheries self-management, marine distribution, management and conservation of marine environment, safety and marine prevention of disasters, apparatus of marine development, under water area development.A new department opening and each department was revised toward to department name and department character. The unit-lesson hour of curriculum according to specialist objective school system of fisheries and marine highschool was revised. professional subject 98 unit-lesson hour(52%), normality subject 90 unit-lesson hour(48%), and educational activity of professional subject 10unit-lesson hour, total training activity 10 unit-lesson hour. And the special objective school system need to revise curriculum of 208 total unit-lesson hour.

• 한국수산과학회지
• /
• 제56권6호
• /
• pp.930-935
• /
• 2023

This study aimed to analyze the structure of the value chain of the olive flounder aquaculture industry to increase the value of this industry. Based on the value chain theory, olive flounder aquaculture industry activities were classified as primary and support activities. The primary activities included seed production, fish production, producer distribution, consumer distribution, and consumption. The support activities were production infrastructure, organization and specialization, R&D, and government policy. A survey was conducted on the costs of seed and fish production in the primary activities to investigate the business structure, and the distribution structure was analyzed to examine distribution costs and margins. In the support activities, the recent trends in R&D and government policy were mainly examined, based on which, a measure to reduce costs and maximize profits was suggested. It is necessary to reduce costs across the production processes by improving seed quality and reducing labor, feed, and management costs, which are strongly associated with support activities. Therefore, lowering costs will be possible in the olive flounder aquaculture industry when R&D outcomes, such as species development, feed quality improvement, and aquaculture system development, are stably diffused and applied in tandem with government policy regarding the industry.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.905-913
• /
• 2017

Advanced reactor designs often feature longer operating cycles between refueling and new concepts of operation beyond traditional baseload electricity production. Owing to this increased complexity, traditional proportional-integral control may not be sufficient across all potential operating regimes. The prototypical advanced reactor (PAR) design features two independent reactor modules, each connected to a single dedicated steam generator that feeds a common balance of plant for electricity generation and process heat applications. In the current research, the PAR is expected to operate in a load-following manner to produce electricity to meet grid demand over a 24-hour period. Over the operational lifetime of the PAR system, primary and intermediate sodium pumps are expected to degrade in performance. The independent operation of the two reactor modules in the PAR may allow the system to continue operating under degraded pump performance by shifting the power production between reactor modules in order to meet overall load demands. This paper proposes a Takagi-Sugeno (T-S) fuzzy logic-based power distribution system. Two T-S fuzzy power distribution controllers have been designed and tested. Simulation shows that the devised T-S fuzzy controllers provide improved performance over traditional controls during daily load-following operation under different levels of pump degradation.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.50-55
• /
• 2014

Currently, flat cover glasses are widely applied to mobile devices. However, for a good design and for convenience of use, curved cover glasses are in demand. Thus, many companies are attempting to produce curved cover glasses using a shaving technique, but the production efficiency is very low. Therefore, a molding technique has been adopted to increase the efficiency of curved glass production systems. For a glass molding system, a uniform temperature distribution of the mold is crucial to produce high-quality curved cover glasses. Before setting the heating conditions of the molding system for a uniform temperature distribution by a thermal analysis, verification is required. Therefore, in this study, temperature measurements were conducted for a prototype molding system and the experimental results were compared with simulation computations. The temperatures of the heating block surface were in good agreement with the computational results for transient and steady conditions.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.115-119
• /
• 2011

To help the corporations ensure more efficient production management, the Enterprise Resource Planning (ERP) system has been introduced in operation, together with a variety of approaches to make improvements in terms of quality and productivity issues. Yet, with the different types of ERP systems in operation, many companies are going through many difficulties not only in having greatly reduced work efficiency but also in making prompt decisions from the entire group-based integrated information. In this study, the analysis was made on their own ERP systems and working processes operated by a company running the multiple number of productions from the domestic and the overseas suppliers, in order to support their interacted work flow regarding their products and help improve the work efficiency by establishing standardized ERP system. Through this, it is expected to ensure more competitive system in operation by securing the flexibility in the production as well as efficient resource distribution under the corporate context of cost reduction and quality improvement.

• 산업경영시스템학회지
• /
• 제22권51호
• /
• pp.29-40
• /
• 1999

The distribution center location and routing problem involves interdependent decisions among facility, transportation, and inventory decisions. The design of distribution system affects the customers' purchase decision by sets the level of customer service to be offered. Thus the lower product availability may cause a loss of demand as falls off the customers' purchase intention, and this is related to the firm's profit reduction. This study considers the product availability of the distribution centers as the measure of the demand level change of the demand points, and represents relation between customer service and demand level with linear demand function. And this study represents the distribution center location and routing to demand point in order to maximize the total profit that considers the products' sales revenue by customer service, the production cost and the distribution system related costs.

• 한국산림과학회지
• /
• 제76권4호
• /
• pp.390-396
• /
• 1987

지역삼림계획에 있어서 목재생산을 예측하는 모델을 작성하고 그 계산예를 제시하였다. 목재생산예측의 방법으로서 감은율법(減殷率法)이 이용되고 있다. 령목(鈴木)는 감마분포에 의해서 삼림의 수명을 결정하지만 본 예측 모델에서는 현재 삼림의 수명분포로서 적당하다고 생각되는 와이블분포나 감마분포 중 어느쪽을 사용해서라도 목재생산을 예측할 수 있도록 시스템화 하였다. 본 시스템을 분기별 수확량, 축적량, 노동량 등의 경영정보를 제공하게 되며 지역삼림계획 책정에 있어 유효한 수단으로 이용될 수 있을 것이다.

• 한국해양학회지
• /
• 제27권2호
• /
• pp.154-163
• /
• 1992

박테리아의 개체수와 생산량의 분포률, 그리고 하구 혼합 (estuarine mixing)이 이들 분포에 미치는 영향을 조사하기 위해, 1990년 10월부터 1991년 8월까지 만경강 및 동진강 하구의 유광대에서 박테리아의 개체수, 생산량, 수온 및 염분도를 3번 조사 하였다. 제한된 조사에도 불구하고 조사기간에 나타난 박테리아의 개체수와 생산량은 넓은 범위의 값을 보였다. 각각 0.4-5.8$\times$10/SUP 9/ 1/SUP -1/와 0.1-22.2 ug C /SUP -1/ d/SUP -1/이었다. 이는 박테리아의 성장이, 하구에서 매우 유동적임을 나타냈다. 흥미롭게도 박테리아의 개체수는 대부분의 수임이 얕은 정점의 표면 아래에서 증가하 였으나, 박테리아의 생산량은 뚜렷이 감소하였다. 이러한 현상은 하구 혼합에 의해서 설명될 수 있을 것으로 판단되며, mixing diagrams의 분석은 하구 혼합이 박테리아 개 체수와 생산량을 conservative하게 혼합하기도 하나, 박테리아 개체수를 증가시키며, 생산량을 감소시키는 작용을 하였으며를 보여주었다. 이것은 하구 혼합의 역할이 박테 리아의 개체수와 생산량의 분포에 따라서 하구에서의 생지화학적 순환에 있어서 중요 함을 제시하였다.