• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.54-64
• /
• 2005

This paper presents an advanced architecture for a traffic generator capable of producing ATM traffic streams according to fully general semi-Markovian stochastic models. The architecture employs a basic traffic generator platform and enhances it by adding facilities for 'driving' the cell generation process through high-level specifications. Several kinds of optimization are employed for enhancing the software's speed to match the hardware's potential and for ensuring that traffic streams corresponding to models with a wide range of parameters can be generated efficiently and reliably. The proposed traffic generation procedure is highly modular. Thus, although this paper deals with ATM traffic, the main elements of the architecture can be used equally well for generating traffic loads on other networking technologies, IP-based networks being a notable example.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.36-45
• /
• 2000

Automated production system is composed of many complicated techniques and it become a very difficult task to control, monitor and diagnose this compound system. Moreover, it is required to develop an effective diagnosing technique and reduce the diagnosing time while operating the system in parallel under many faults occurring concurrently. This study develops a Modular Artificial Neural Network(MANN) which can perform a diagnosing function of multiple faults with the following steps: 1) Modularizing a complicated system into subsystems. 2) Formulating a hierarchical structure by dividing the subsystem into many detailed elements. 3) Planting an artificial neural network into hierarchical module. The system developed is implemented on workstation platform with $X-Windows^{(r)}$ which provides multi-process, multi-tasking and IPC facilities for visualization of transaction, by applying the software written in $ANSI-C^{(r)}$ together with $MOTIF^{(r)}$ on the fault diagnosis of PI feedback controller reactor. It can be used as a simple stepping stone towards a perfect multiple diagnosing system covering with various industrial applications, and further provides an economical approach to prevent a disastrous failure of huge complicated systems.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.72-84
• /
• 2001

This paper proposes a design methodology for customer, assembly and disassembly considering recycling. The disign process starts with the identification of customer needs, which are in turn converted into functional requirements. The concepts of Design for Customer(DFC), Design for Assembly(DFA), Design for Variety(DFV) and Design for Disassembly(DFD) are considered in the product design phases in order to decreas production variety and mass customization. And, a new module generation approach is developed for rearranging and clustering parts and subassemblies for disassembly and recycling. Based on the result of the module generation, a new configuration methodology is suggested to minimize the disassembly time or number of disassembly operations for recycling.

• 한국주거학회논문집
• /
• 제27권1호
• /
• pp.63-70
• /
• 2016

Domestic apartment housing has been designed in accordance with the new housing supply-driven policies for a long time. As a result, its design, material production, construction, maintenance and remodeling process, rather than being systematically performed, were individually approached to cause insufficient linkage between technologies. For these problems and the supply of long life housing, active research on long life housing has been conducted in Korea since 2005. However, the existing research on long life housing has been focused on a single item with no connection made between infill systems, and no overall interface rule, resulting in no activation of the business. In this study, for the supply and activation of long life housing, we aim to analyze the problems of existing long life housing to set up its matching standards for infill systems.

• 산업공학
• /
• 제7권3호
• /
• pp.69-76
• /
• 1994

In this paper, we develop a real-time manufacturing control and information management(POP) system that can support realization of CIM and information network of manufacturing system. The POP system systematically collect informal data that is originated from working area and make an offer collected information to planning side. Especially, this study designs a modular POP terminal that directly extract and process momentary information from field source and provide it to control system on real-time. In addition, we apply developed POP system with open architecture to flexibly and optimally operate the manufacturing system based on CIM.

• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.517-524
• /
• 2003

생물생산에 요구되는 다양한 작업들을 생력화하기 위한 연구 개발 노력이 전세계적으로 활발히 추진되어 왔다. 이러한 연구 개발은 주로 노동집약적인 작업, 고부가가치 농산물을 생산하기 위한 작업 그리고 작업자에 유해한 또는 가혹한 환경하의 작업 등에 주안점을 두고 추진되고 있다. 하지만, 생물생산 분야의 생력화를 추진하는데 있어서 다양한 작업성과 강건성이라는 작업성능 측면에서의 기술적인 문제와 고가의 시스템 및 설비 비용에 따른 경제성 문제가 항상 걸림돌이 되어 왔다. 본 연구에서는 언급한 문제점들 외에 기계가동률, 유지보수 등 생물생산분야의 생력화에 있어 내재되고 있는 문제점들을 효율적으로 해결하기 위하여 무선 원격로봇 시스템에 의거한 새로운 생력화 개념을 제안하였다. 새로운 개념의 생력화는 주어진 작업을 성공적으로 수행하기 위하여 작업자(농민), 컴퓨터 그리고 로봇을 위시한 자동화 작업설비를 대상으로 상대적으로 수월성을 갖는 기능을 중심으로 역할을 분담하는 것이다. 또한 시설재배에 요구되는 전정, 관수, 방제, 제초, 수확, 운반 등과 같은 다양한 작업들을 노동 투하정도와 기능적 유사성 측면을 고려하여 일관적으로 작업을 생력화하는 방안을 제시하였고 제안한 개념을 구현할 수 있는 시스템을 개발하였다. 대상 작목으로는 중량으로 인하여 비교적 취급이 어려운 수박을 선택하였다. 개발 시스템은 크게 무선원격 모니터링 및 작업제어 모듈, 무선원격 영상 획득 및 데이터 송수신 모듈, 4자유도 직교좌표형 로봇 암을 장착한 갠트리 장치부, 교체가 가능한 모듈형 선단 작업장치, 수박 운반 적재모듈의 5개 하드웨어 모듈로 구성하였다. 개발한 시스템은 그래픽 사용자 인터페이스를 통하여 터치 스크린 모니터를 이용하여 작업자와 컴퓨터간의 인터페이스를 구현하였으며 무선 원격데이타 송수신과 분산 제어기를 이용하여 작업자와 컴퓨터 그리고 로봇 작업기간의 인터페이스와 시스템 제어를 구현하였다. 개발 시스템의 성능을 시험하여 결과를 제시하였으며 본 논문에서 제안한 새로운 개념의 생력화 시스템은 생물생산분야의 생력화 방향을 새롭게 제시하는 실질적이고 실현 가능한 시스템이라는 것을 보여주었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 제2회 하계분리막 Workshop
• /
• pp.45-58
• /
• 1994

Over the last 20 years, membrane separation processes, such as reverse osmosis, ultrafiltration and microfiltration, have been widely adopted by different industries. Commercial uses of membrane have displaced conventional separation processes, such as distillation, evaporation, precoat filter and so on. Membrane separation processes are often more capital and energy efficient when compared with conventional separation processes. Membrane devices and systems are almost always compact and modular. These are the well-known advantages of membrane separation processes. The disadvantage of the membrane process is that the process does not have scale merit and thus the membrane process is suitable for the small and middle size applications. Energy saving is, of course, the biggest advantage of the membrane process, and in many industries the membrane processes are employed because of this reason. Membrane process has other big advantage. In many applications membrane processes provide much higher quality of product than conventional processes. The example is ultrapure water production by membrane processes in semiconductor industry. Conventional technologies never offer such good quality of pure water. If you can obtain both energy saving and higher quality of product at the same time by membrane processes, this is the best application of membrane processes. One example is the concentration of orange juice by membrane, which has already been commercialized in Japan. Comparing with the conventional vacuum evaporation process, juice concentrated by the membrane process has much better taste and flavor and the energy consumption in the membrane process is much less than the evaporation process. In this paper, first membrane separation technology will be classified and then Japanese membrane manufacturers and new modules and devices under development in Japan will be introduced. Fourth energy saving in membrane process will be discussed and finally practical applications of membrane processes in Japan will be shown.

• 품질경영학회지
• /
• 제47권1호
• /
• pp.199-211
• /
• 2019

Purpose: The concept of quality is changing in the quality 4.0 era with the fourth industrial revolution in the world. This research aims to understand the characteristics of well-adapted companies against the quality 4.0 era and to improve the quality of clothing companies. Methods: We analyzed companies that responded well to the quality 4.0 era, especially Kutesmart using Quality 4.0 Matrix. We focused on the service process of Kutesmart and we suggested modified service process to improve quality. We also interviewed an expert to verify this process is valid. Results: We found that two types are classified of well-adapted companies against the quality 4.0 era. Especially, Kutesmart has built a smart factory and introduced new technologies like 3D scanner and big data analysis. However, Kutesmart has a weakness in post-purchase process like other clothing companies. Kutesmart could solve this problem with modular production method for damaged part of customer. Conclusion: This research can be used for better understanding of the characteristics of well-adapted companies against the quality 4.0 era and service process of Kutesmart that is custom clothing company for providing information for benchmarking in this industry. This study suggests that further empirical researches on the costs and the efficiencies of applying the new technologies are necessary.

• 한국실내디자인학회논문집
• /
• 제19권5호
• /
• pp.83-94
• /
• 2010

Conventionally, ornament has developed around linear thinking based on Euclidean geometry, and been explained as simple and lucid natural Euclidean geometrical phenomena. The modular arrangement with vertical, horizontal and diagonal grids has been an organizing principle of classical ornament, but in digital era ornament is found not to be explained only with the principle of traditional arrangement due to the seemingly irregular complex forms. In that sense, this study presents the concept of digital ornament and examined the backgrounds of ornament in digital age, that are complex system and non-Euclidean geometry. Accordingly, the present study takes an approach by dividing new formal types of ornament into algorithmic form, hybrid form and dynamic form to find out a principle of pattern organization. Lately, architects who actively use computer for their architectural designs take the algorithmic strategies in nature and create various and complex patterns by simple rules. The patterns are not the repetition of the same, but the production of singularities. In addition, hybrid form by morphing shows a topologically flexible evolutionary transformation, and is used to create in-between transitional shapes from the source to target. Finally, the patterns by the interaction between the system components which are corresponded to the embedded forces emerge from dynamic simulation of the natural environment. Rather than objects itself, focus is given to the process of generating forms, and the ornamental patterns as the revelation of such implicit order provide not just the formal beauty but also spatial pathways for lights and air, maximizing the effects of lights.

• 문화기술의 융합
• /
• 제9권1호
• /
• pp.111-118
• /
• 2023

본 연구는 새로운 제품에 대한 요구와 다양성을 추구하는 일반 소비자들에게 제시되고 있는 주얼리 디자인을 연구하는 데 목적이 있다. 기존에 판매되고 있는 여러 가지 제품 모듈을 서로 바꾸어 착용할 수 있도록 한 다변형 교체 방식의 주얼리와는 구별되는 구조와 결합 방식의 모듈형 주얼리디자인을 제시하고자 한다. 기존의 다소 작은 여러 부품들을 복잡한 결합 방식으로 제작하는 경우 문제점이 발생할 가능성이 높으며 소비자가 장식 부품을 교체하면서 작은 고정 장치 부품을 조립하는 과정에서 분실하는 어려움이 따를 수 있다. 따라서 이런 문제들을 줄이기 위해 다른 결합 부품 필요 없이 손쉽게 교체하여 착용할 수 있도록 심플하고 단순한 디자인 위주로 제작한 주얼리 제품들과는 차별화시키고 최신의 3D프린터(Rapid Prototyping)를 이용하여 제작하려 한다. 이 연구는 현장 실무에 종사하며 얻어진 경험 및 노하우를 바탕으로 실물 제작이 가능하고 제작 과정 시 문제점 발생을 최소한으로 줄이는 데 주력했으며, 이를 통해 시간적, 경제적인 손실을 줄일 수 있다. 3D프로그램(CAD)을 사용하여 제작함으로서 보다 정교하고 차별화된 형태를 표현하여 개선된 주얼리 제품을 제작하는 데 연구목적이 있다.