• Geomechanics and Engineering
• /
• 제32권5호
• /
• pp.503-512
• /
• 2023

In tunneling projects, a significant part of the costs is spent on segment production. By more economically producing, the cost of tunnel construction can be greatly reduced, especially in long and large-diameter tunnels. In the present study, the effect of using the Carousel method in the improvement of the production system performance compared to the conventional Static system has been studied. To carry out the research, a quantitative comparison of cost and production time was carried out for two production methods using the available documentation. The opinions of experts have been obtained using questionnaires and qualitative comparison of cost, time and production quality was done by implementation of statistical analysis. The SPSS software and the univariate t-test were used to analyze the questionnaires. According to the results of statistical analysis with SPSS, the use of the Carousel method will reduce production time and costs along with increasing manufacturing quality. According to the documentation analysis, the Carousel method reduces the cost of production by almost 30% and leads to a reduction of the production time to approximately 40% of the Static moulds system. The Carousel method has a higher production rate, efficiency, and better performance. Research into quantifying the benefits of Carousel method in the production system performance is very limited. This comparison is based on real information from the under construction Tabriz Metro project. This article can be very helpful in choosing the best production method.

• Management Science and Financial Engineering
• /
• 제6권1호
• /
• pp.37-63
• /
• 2000

An important objective of pull-based production control is to achieve synchronized and smooth production flow in a multi-stage system that is subject to uncertainty. To our knowledge, previous research has not generated a performance measure that captures this objective of pull-based probased production control system. This performance material with respect to the instant when the operation is required. We examine the issue of asynchronous waste in a two-stage kanban control system.

• Journal of Drive and Control
• /
• 제19권4호
• /
• pp.91-96
• /
• 2022

The performance and reliability of foreign servomotors and domestic servomotors for manufacturing robots were compared and verified. The mass productivity was confirmed by satisfying the requirements of the demanding companies. The servomotor was designed in consideration of mass productivity while satisfying the requirements of the demanding company. It was mounted on a real robot to check its performance and reliability. To secure mass-production performance, we designed and manufactured easy-to-manufacture parts and jigs to manufacture servomotors and achieved the goal of the mass-production evaluation of servomotors through individual performance evaluation, robot mounting test evaluation, and supplementation.

• Journal of Plant Biotechnology
• /
• 제48권2호
• /
• pp.86-92
• /
• 2021

The present study aimed to evaluate the initiation, proliferation potential, and mass clonal production ability of a micropropagation system for banana through tissue culture. A total of 60 explants were cultured on basal media supplemented with various concentrations of BAP and NAA. Banana plants regenerated on MS basal medium (control) without the addition of BAP + NAA showed a significantly (P < 0.05) lower survival rate with no signs of shoots up to the end of the experimental period. The results further revealed that the performance in MSS-XI medium was almost 89%, followed by MSS-IX and MSS-X media, both of which showed performance up to 88%. In contrast, the performance in the MSS-XVI medium was less than 60%, at the less duration of time and highly shoot induction detected at MSS-XIII medium. The maximum number of shoots (4.9) was observed in the medium supplemented with growth adjuster MSS-XI, followed by the MSS-XII medium (4.5). Surprisingly, the best performance was observed for the MSR-VII medium approximately 16 days after initiation, while the lowest performance was observed with MSR-XI (approximately 31 days). The maximum rooting percentage (98%) was observed in the MSR-V to MSR-VIII media (98%), while the minimum rooting percentage was observed in MSR-XI (approximately 45%).

• Management Science and Financial Engineering
• /
• 제3권1호
• /
• pp.57-74
• /
• 1997

An EOQ-like inventory model for a manufacturing process is studied. The system is assumed to deteriorate during the production process. The results are either the production of a number of defective items, or the breakdown of the production machine. The optimal production lot size is derived. The model is extended to the case in which the probabilities of making defective items and machine breakdowns are a function of both the quantity (amount) and quality (performance) of the consumed setup cost (including the preventive maintenance cost). We further assume that the setup performance can be improved by investing in the performance improvement program. Hence, the same or a better setup outcome can be achieved with a lower setup cost. We then investigate the optimal setup cost and investment policy simultaneously, thereby achieving a better process quality and setup cost reduction concurrently.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제7권7호
• /
• pp.1-14
• /
• 1999

In the present study, the flame factor which primarily influence the simulation accuracy of the combustion process in a gasoline engine was modeled as a nonlinear function of turbulent intensity to laminar flame speed ratio. Multi-length-scale production rate model for turbulent kinetic energy equation was introduced to consider the different length scales of the swirling and tumbling motions in cylinder on the production rte of turbulent kinetic energy. By7 introducing the multi-length-scale production rate model for the turbulent kinetic energy equation, the predictions of turbulent burning velocity , cylinder pressure, mass burning rate and engine performance of a gasoline engine can much be improved.

• Journal of the Korean Ceramic Society
• /
• 제47권1호
• /
• pp.1-7
• /
• 2010

Solid oxide fuel cells (SOFCs) have been under development for a variety of power generation applications. Power system sizes considered range from small watt-size units (e.g., 50-W portable devices) to very large multi-megawatt systems (e.g., 500-MW base load power plants). Because of the reversibility of its operation, the SOFC has also been developed to operate under reverse or electrolysis mode for hydrogen production from steam (In this case, the cell is referred to as solid oxide electrolysis cell or SOEC.). Potential applications for the SOEC include on-site and large-scale hydrogen production. One critical requirement for practical uses of these systems is long-term performance stability under specified operating conditions. Intrinsic material properties and operating environments can have significant effects on cell performance stability, thus performance degradation rate. This paper discusses potential applications of the SOFC/SOEC, technological status and current research and development (R&D) direction, and certain aspects of long-term performance degradation in the operation of SOFCs/SOECs for power generation/hydrogen production.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.28-36
• /
• 2010

Hardware implementation methods for Artificial Neural Network (ANN) have been researched for a long time to achieve high performance. We have proposed a Network on Chip (NoC) for ANN, and this architecture can reduce communication load and increase performance when an implemented ANN is small. In this paper, a multiple NoC models are proposed for ANN, which can implement both a small size ANN and a large size one. The simulation result shows that the proposed multiple NoC models can reduce communication load, increase system performance of connection-per-second (CPS), and reduce system running time compared with the existing hardware ANN. Furthermore, this architecture is reconfigurable and reparable. It can be used to implement different applications of ANN.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 한국실내디자인학회 2001년도 춘계학술발표대회 논문집
• /
• pp.100-105
• /
• 2001

The space in today's digital era is developing in a new direction with the changing paradigm, which is different from that in the analog era. The space that appeals to the advanced technology mobilizes all the five senses of the space user with the technical elements of the more variable fields and aesthetic productions, and creates an interactive environment by motivating the user's active participation through the digital media. The environmental device called digital media connects the function pace with living performance. Unlike in the analog space, the different sides of the digital media space create a human consciousness that corresponds to the realistic ambience, further contributing to the lively condition. For the main production technique in the digital medias performance-active space, there are electronic image production, changeable production, impromptu-active production, light and sound production, and total artistic production that lead to the progressive interaction between man and space.

• Proceedings of the Korea Society for Simulation Conference
• /
• 한국시뮬레이션학회 1999년도 춘계학술대회 논문집
• /
• pp.105-109
• /
• 1999

Tool shop of the D Heavy Industries Co.(DHI) fabricates engines for a bus, truck, small ship. In order to increase the production capacity of engines, DHI will be established the new tool shop that consists of a block line, head line, assembly line, test line and AS/RS in 1999. In order to assure the production capacity designed of the new tool shop for producing engines and improve the production process of it, it is needed to find a bottleneck process and an optimal way of allocating workloads among machines and workers to maximize the production. In a way to solve this, we model the engine fabrication process of the tool shop and analyze its performance by computer simulation. In this study, we at first identify the bottleneck processes of the engine fabrication process under the designed operation policy. Then, we derive some alternative operating policies applicable to the new tool shop of an engine, and analyze the optimal operation policy by comparing the performance of the tool shop following each alternative policy.