• 한국물환경학회지
• /
• 제24권3호
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제17권2호
• /
• pp.169-172
• /
• 2008

Indian tropical tasar silkworm, Antheraea mylitta D is reported to have forty four ecoraces by way of their adoption to different topographical and vegetational conditions. Of late, another ecorace 'JATA' - univoltine under in-situ condition has been explored which is localized in Thakurmunda area of the foot hills of Simlipal biosphere (Mayurbhanj district) of Orissa, India. The ecorace 'Jata' exhibits superior economic characters over widely commercialized ecoraces of Daba and Sukinda. The cocoon production of localized 'Jata' ecorace is depleting day by day in in-situ condition. In the present study, efforts were made to stabilize the ecorace 'Jata' under ex-situ condition at Ranchi (Jharkhand), where the 'Jata' ecorace silkworms were reared on Terminalia tomentosa for four successive generations during 2006 and 2007 and the cocoons were preserved in grainage house under prevailing climatic conditions. The results indicated change in voltinism behaviour of the 'Jata' ecorace from univoltine to bivoltine. The rearing performance and grainage efficiencies indicate the tendency of 'Jata' ecorace towards acclimatization and stabilization under Ranchi climatic conditions. The 'Jata' ecorace manifests the prospects for acclimatization, stabilization and commercial exploitation.

• 한국환경보건학회지
• /
• 제23권3호
• /
• pp.40-49
• /
• 1997

In Korea, naked barley and tapioca are main raw materials for the production of fermentation ethyl alcohol, and one million drums bf 95% fermentation ethyl alcohol is produced per year by use of them. Stillage of alcoholic fermentation is mostly digested by methane fermentation process, and methane gas occured if methane fermentation process is recovered and mixed with fuel to decrease 25-30% for total fuel used in factories. In the anaerobic digestion process of naked barley stillage, supplement of nutrients is necessary to slove the problems caused by inhibitory materials contained if stillage and deficiency of nutrients. Therefore, the objective of this study was to examine why the anaerobic digesters using the naked barley distillery wastewater have shown the poor digestability frequently and how to control it. As the poor digestion was supposed to be occurred by the lack of iron as trace nutrient, the experiments were carried out to find out the optimum dosage and the way of addition of iron and to assess the quantitative evaluation of the type of iron in digesters. Initially, bottle test as batch digesters and lab-scaled continuous flow digesters were used in order to determine the digestion characteristics with tapioca and naked barley distillery wastewater. According to the results of batch tests, the poor digestion was caused by volatile fatty acids and could be improved by adding of calcium. The activity of the methanogenic bacteria were increased remarkably when the iron was added to the digester in the form of mixture with substrates.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.63-71
• /
• 1988

This study is an experimental research on the anaerobic digestion of pig manure and night soil mixed waste at room temperature (25$\circ$C), and the results are shown below: 1. The steady-state condition based on gas production as digestion temperature dropped to 25$\circ$C from 35$\circ$C was achieved at around 28, 47, 56, 64 days respectively when its hydraulic retention time(HRT) are 10, 20, 30, 40 days. 2, Alkalinity and volatile acid(VA) was increased as increasing the organic loading. 3. Removal efficiency of chemical oxygen demand(COD) and biochemical oxygen demand (BOD) was improved as longer HRT, and generally COD value is lower and BOD value is higher relatively. 4. Overall treatment efficiencies of mixed waste are higher than of pig manure and of night soft. 5. Organic removal efficiency at room temperature (25$\circ$C) is 20-25% lower at medium temperature (35$\circ$C) in a same VS loading condition. 6. Refractory fraction of the infiuent VS and organic removal rate constant(K) estimated at around 37% and 0.107/day respectively.

• 한국포장학회지
• /
• 제13권2호
• /
• pp.43-50
• /
• 2007

The production, distribution, and consumption of Korean medicinal herbs have increased every year because of an increase of health considerations. But there are no sufficient standardization procedures in packaging and distribution systems related to these herb products. The standardization of packaging material and dimension could be a good addition for establishing proper quality control methods for Korean medicinal herbs. Medicinal herbs deteriorate under physical, chemical and biological hazards such as oxidation, textural change under high moisture content, color change by light, sanitation problems by insect invasion and contamination. Packaging standardization with proper functional packaging materials is critical to ensure the qualities of medicinal herbs. Also, storage and distribution efficiencies can be improved by achieving packaging dimension standardization. This review summarizes recent research trends related to quality evaluation methods and major quality deterioration factors of Korean medicinal herbs. This paper also offers reviews on some of problems and challenges in current packaging and distribution systems of medicinal herb industries and briefly suggests advanced quality control methods through packaging standardization.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1397-1405
• /
• 2009

In recent decades, exergy analysis has been holding spotlight as a useful tool in the design, assessment, optimization, and improvement of energy system. This paper presents the results of the energy and exergy analysis of a steam turbine cogeneration system for industrial complex using two efficiency concepts of conventional one and exergetic one. In order to obtain the destroyed exergy of each component, mathematical analysis is conducted by using exergy balance and the second law of thermodynamics, according as the parameters are changed, such as the ratio of returned process steam, process steam supplied, temperature and pressure of boiler and power. The computer program developed in this study can determine the efficiencies and exergy destroyed at each component of cogeneration system. As a result of this study, a component having the largest destroyed exergy was boiler. And closed and opened feedwater heater had the lowest one. The affects to the cogeneration system due to the variation of process steam flow and return rate of condensed water is shown that the total electric power efficiency(${\eta}_E$) is decreased as increasing the return rate of condensed water under constant process steam flow. As the boiler pressure is increased for the more production of electricity, the efficiency of cogeneration system was decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.767-771
• /
• 2002

Breeding efficiencies were compared among three population schemes: a single population, a population with two subpopulations and a population with three sub-populations. A simulation experiment of selection was carried out for 10 generations with 20 replications each by comparing average breeding values and inbreeding coefficients among the three population schemes. Phenotypes of three traits were generated with a model comprising 36 loci, each with additive genetic effects and residuals distributed normally. Among the three population schemes, the single population scheme was definitely superior to the other two with regards to selection response and inbreeding. The multiple sub-population scheme was, however, considered to be an alternative population scheme when the difference in economic weights of the traits was small among the sub-populations, assuming moderate inbreeding depression for traits and crossbreeding. The scheme with two sub-populations had a higher genetic value than that with three subpopulations; however, the genetic values of the schemes were comparable when maternal heterosis was taken into account. The choice of population schemes may depend on the cost-sharing policy between the breeding population and the commercial population rather than just the breeding efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권2호
• /
• pp.273-279
• /
• 2006

The performance of an autothermal thermophilic aerobic digestion (ATAD) system was studied to determine if nitrogen loss, as ammonia, was affected by an exhaust gas condenser. The system was run with and without a condenser while treating $8m^3$ of piggery slurry for 8 days. The system with a condenser (SWC) maintained the reactor temperatures above $40^{\circ}C$ for 2 days during the 8 days run, while the system without a condenser (SWOC) remained above $40^{\circ}C$ for 6 days. The SWC maintained the reactor temperatures mostly at mesophilic conditions while the SWOC at thermophilc conditions. Differences in operation conditions for the two runs were mainly caused by differences in atmospheric temperatures. Soluble chemical oxygen demand (SCOD) and volatile solids (VS) removal efficiencies of the SWC (SCOD: 62%, VS: 41%) were higher than those of the SWOC (SCOD: 40%, VS: 20%). The total Kjeldal nitrogen (TKN) removal efficiency of the SWC (7%) was less than that of the SWOC (25%). The concentration of total volatile fatty acids (VFA) in the SWC was observed to be lower than the threshold value of 0.23 g total VFA/L after 6 days, while the SWOC progressed below the threshold value after 3 days. No offensive odor emissions were observed in either run, which suggest that the use of the ATAD system may be a good odor removal strategy.

• 산학경영연구
• /
• 제3권
• /
• pp.47-75
• /
• 1990

This study focuses on the ecological and environmental approach for marketing in the attempt to harmonize the objectives and resources of the organizations with the changing environment. This study presents the deductive and nomative method for analyzing recurrent marketing problem and contains seven chapters. The marketing environment is the place the company must start in searching for oportunities and in monitoring threats. It consists of all the actors and forces that affect the company's ability to transact can be divided into two componets-The marketing environment comperies a microenvironment consists of the actors in the company's immediate environment that affect its ability to serve its customers, namely, the company, market channal firms, customers, competitors and publics, the macroenvironment consists of the larger societal forces that affect all the actors in the macroenvironment, nanly, the demographic, economic, natural, technological and cultural forces. Most marketing executives took the phyisical environment for granted. Few consistered it one of the most dynamic elements in the totoal environment of business. However, two development have brought the physical environment to the forefront of business decision. The first has been labeled the ecological crisis-the polution and deterioration of air, water and land, the second is the accelerated depletion of the earth's natural resources. Currently, most product are designed to obtain an optimum combination of customer acceptances and production and distribution efficiencies. If we look to the future, products increasingly will be planned to obtain an optimum combination of market acceptance increasingly, efficiency and environmental protection. The entire ecological cycle of product will have to be considered.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.174-182
• /
• 1998

This paper describes a research work of developing a computer-aided design and machining of irregular shaped-sheet metal product for blanking or piercing operation. An approach to the CAD/CAM system is based on the knowledge-based rules. Knowledge for the CAD/CAM system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, strip-layout, die-layout, data conversion, modelling, and post-processor module. Based on knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of generating NC data automatically according to drawings of die-layout module. Results which are carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing die in this field.