• Asian-Australasian Journal of Animal Sciences
• /
• 제8권3호
• /
• pp.301-305
• /
• 1995

The study was conducted at village level in Pabna milkshed areas of Bangladesh to asses the existing feed and fodder sources of cattle. The results showed that the overall number of cattle per farm family was 7.17 and chicken represents highest number (15.57) per farm family in this area. The results also indicated that during monsoon season the bathan is planted with Vigna mungo and Lathyrus sativus and average grazing hours per day varied from 1.1 in October to 5.6 in February. In Summer, they were offered naturally grown Cynodon dactylon with supplementary feeding of rice straw. The study further showed that the highest (65.7%) feed scarcity was found during mid April to mid May followed by mid June. The cultivation of Vigna mungo was highest (76.71%) compared to Lathyrus sativus by the farmers in the bathan areas. The major constraint to cattle production is the scarcity of quality feed during mid October to mid November.

• 대한설비공학회지:설비저널
• /
• 제17권2호
• /
• pp.131-139
• /
• 1988

The thermoacoustic oscillation induced in an air column with variable cross section area is investigated theoretically and experimentally. The onset condition of the oscillation is derived by equating the acoustic power production to the power dissipation. The power production at the heater is predicted by using the efficiency factor obtained by heat transfer analysis for a single wire in a uniform cross flow and considering the interference between heater wires. The power dissipation is estimated by measuring the attenuating coefficient from the pressure decay curve. The theoretical prediction to the onset condition of the oscillation is confirmed experimentally. The effect of the variation of the column cross section area on the onset condition is presented.

• 한국유기농업학회지
• /
• 제17권1호
• /
• pp.1-17
• /
• 2009

The production of bio-energy crops is a major research project in the emphasizing the "low carbon green growth" strategy. For this, the possibility of the introduction of the new energy crops improve the agricultural income from fanning must be diagnosed. This study describes the level of agricultural income per unit area by cropping system based on the income of crops in the field. Especially, we have chosen the southern part attracting the attention in the possible area of the bio-energy crop production. This study consists of five chapters. Chapter I is the introduction. Chapter II is on the status of the southern part cropping system and the analysis of the economic value. Chapter III is on the economic value analysis introducing new bio-energy crops. Chapter IV is on the comparative analysis for the economic value of the croping system introducing new bio-energy crops. Chapter V is the conclusion.

• The Korean Journal of Ecology
• /
• 제14권1호
• /
• pp.113-117
• /
• 1991

Comparisons of the physico-chemical properties of earthworm(Lumbricus terrestris) soil casts and top soil of red pine forests in a limestone area were carried out. The casts production durign August and September in 1990 amounted to 6∼7t/ha. The particle of top soil and casts ranged 40∼50% and 10∼20% for sand , 25∼30% and 30∼35% for silt, and 20∼25% and 55∼65% clay, respectively. Significant difference in pH value was not observed between casts and top soil. The casts had 1.4times of organic matter, 1.5times of N, 1.8times of available P, 2times of exchangeable K, 1.3times of exchangeable Ca, and 1.6times of exchangeable Mg than the top 10cm of soil did. Earthworms have altered the soil texture and increased nutrient availability through production of the soil casts in this limestone area.

• 산업융합연구
• /
• 제13권1호
• /
• pp.1-9
• /
• 2015

The purpose of this Study is to analyze the economic effect of the project for the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area aimed at activation of R&D of companies within the Kumoh Technology Valley. As the result of the analysis, the investment of 56.837 Billion Won in the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area had the effect on production inducement valued at 133.582 Billion Won, effect on added value inducement valued at 41.764 Billion Won, effect on import inducement valued at 16.794 Billion Won and the effect on employment inducement numbered at 4,992 persons.try.

• 수산해양교육연구
• /
• 제25권6호
• /
• pp.1273-1284
• /
• 2013

The purpose of this study is to develop vocational English textbooks for vocational high school, especially marine production high school. Vocational English is intended to increase English proficiency in the area of specific industry or jobs. Based on the review of the literature, the study established developed vocational English textbooks for marine production high school based on the modular system. The developing process includes analysis for marine production job, marine production high school and current English textbook for marine production. Based on the analysis, this study developed English contents which marine production students utilize in not only school but also workplace. Also, this study suggests future research directions for effective development and use of the textbooks in the vocational high schools.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.231-233
• /
• 2003

Agricultural land use generally shows specific temporal characteristics of NDVI obtained from satellite data. In terms of winter wheat, a higher value compared with other land use types in May and a considerably low value in June could be discriminative features of temporal change of NDVI. In this study, the author examined methods for estimating winter wheat sown area in sub-pixel level of coarse resolution satellite data using temporal characteristics of NDVI. Application of the methods to the major grain production area in China exhibited properly a spatial distribution pattern of winter wheat sown area.

• 한국시뮬레이션학회논문지
• /
• 제25권2호
• /
• pp.75-81
• /
• 2016

고정위치 생산 방식과 이를 개선한 흐름 생산 방식의 생산성을 비교하기 위해 데크하우스 선행의장 공정의 사례를 이용하여 이를 비교 분석하였다. 현재의 선행의장 공정 시스템은 고정위치 생산을 하고 있으며, 여기서는 블록이 한 구역을 점유하고, 작업이 완료 될 때까지 이동하지 않는다. 반면 개선된 흐름생산시스템에서는 블록이 이동하며 작업자와 장비는 움직이지 않는다. 시뮬레이션 결과 제안된 생산시스템에서 블록의 이동시간과 대기시간을 고려하지 않았을 때는 블록의 생산량이 거의 증가하지 않았다. 그러나 흐름생산에서는 작업을 위한 장비와 작업자의 이동과 대기시간이 거의 없어, 작업장의 작업시간의 변동성을 줄일 수 있다면 흐름생산이 고정위치 생산 시스템을 대체하는 보다 더 우수한 대안이 될 수 있음을 보였다.

• Journal of Preventive Medicine and Public Health
• /
• 제24권3호
• /
• pp.400-413
• /
• 1991

The purpose of this paper is to identify factors affecting the optimum mix of required inputs and other relevant factors which account for the variation in physician's productivity in general hospitals, and to find out their implications for the efficient health planning and management. An extended version of Cobb-Douglas production function and cross sectional data of one day patient census from all general hospitals in Korea in 1988 were used in the analysis. Main results of the analysis and their implications could be summarized as follows : (1) The production function for physician's inpatient service shows the evidence of economies of scale, but the production function for physician's outpatient and adjusted-patient service, which combines both out- and in-patient service, shows that of dis-economies of scale. (2) The physician's role for production for all service is smaller than auxiliary personnel's, which imply that more intensive utilization of nurses, nursing aides and other auxiliary personnel is desirable for improving general hospital productivity (3) In case of physician's inpatient and adjusted-patient service, nurses' role is greater than nursing aides'. Therefore, more extensive utilization of nurses is recommended for the efficient operation of general hospitals. (4) The factor of hospital beds plays the leading role among required inputs in the production for physician's in- and adjusted-patient service. (5) The physician's productivity of general hospitals in rural area is lower than that in urban area. And the productivity of teaching hospitals is lower than that of the other hospitals. Further analysis was made in physician production function based upon the size of hospitals, namely those hospitals below 250 beds and those above. Explained variances by the factor of hospital beds was significantly increased in the case of those hospitals above 250. A more detailed and thorough investigation is needed for verifying factors influencing physician's productivity in general hospitals in Korea.

• 대한조선학회논문집
• /
• 제46권1호
• /
• pp.78-86
• /
• 2009

A capacity calculation and process analysis is a very important part for the entire ship production planning. Ship's production plan is set up with a concept that the product is produced based on the capacity achievable by the processes while general manufacturing sets up the production plan based on product lead-time. Therefore, in case the calculation of capacity for each process of shipbuilding yard is different from actual conditions, a series of production plan - ship table composition, dual schedule plan and execution schedule plan, etc - may accumulate errors, lose reliability of planning information and cause heavy cost deficit in this course. In particular, in case of new shipbuilding yard, stocks between processes are built up and half blocks are not supplied in timely manner, and that is sometimes due to the clumsiness of the operator but it is more often because of the capacity to execute each process is not logically calculated. Therefore, this paper presents the process to calculate the assembly leadtime and assembly process capacity for shipbuilding yard assembly factory. This paper calculated the block type for calculation of assembly lead time based on block DAP(detailed assembly procedure), and introduced cases that calculate production capacities by assembly surface plate by considering the surface plate occupied area of the blocks that change depending on assembly field area and assembly processes through assembly simulation.