• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.102-111
• /
• 1990

In this thesis, an optical bidirectional inner-product associative memory model using liquid crystal television is proposed and analyzed theoretically and realized experimentally. The LCTV is used as a SLM(spatial light modulator), which is more practical than conventional SLMs, to produce image vector in terms of computer and CCD camera. Memory and input vectors are recorded into each LCTV through the video input connectors of it by using the image board. Two multi-focus hololenses are constructed in order to perform optical inner-product process. In forward process, the analog values of inner-products are measured by photodetectors and are converted to digital values which are enable to control the weighting values of the stored vectors by changing the gray levels of the pixels of the LCTV. In backward process, changed stored vectors are used to produce output image vector which is used again for input vector after thresholding. After some iterations, one of the stored vectors is retrieved which is most similar to input vector in other words, has the nearest hamming distance. The experimental results show that the proposed inner-product associative memory model can be realized optically and coincide well with the computer simulation.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.34-38
• /
• 2012

Test work is the press die branch at The Korea-China-Japan Grand Prize Contest. This study focuses on strip layout design for test work. A comparison is drawn between product shape and blank deployment line. During the forming analysis of the whole product, shape part of the total forming process is analyzed. As for forming part and flange deployment, forming analysis is carried out in part during the mid process. Material utilization is 42.6 percent and strip layout design is completed in 14 processes that are comprised of hourglass, slotting, embossing, drawing and trimming.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.936-941
• /
• 2005

To achieve rapid developments and ensure competitiveness, cost saving, digital manufacturing is essential in die shops. Digital Manufacturing is a technology to facilitate effective product developments and agile productions by digital environments representing the physical and logical schema and the behavior of real manufacturing system including manufacturing resources, processes and products. For applying digital manufacturing to die shop, engineering information managements of products, manufacturing process and resources are needed. In this paper proposes and implements, PLM approach for achieving engineering collaborations in engineering activities. We suggest detail procedures, some examples and considerations of PPR managements in die shop.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.200-205
• /
• 1993

The automatic forming sequence design system can determine desirable operation sequences even if they have little experience in the design of cold forging process. This system is proposed,which generates forming sequence plans for the multistage cold forging of zxisymmetrical solid products. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the product is a key in planning processes. Forming sequence for the part can be determined by means of primitive geometries such as cylinder,cone, convex, and concave. By utilizing this geometrical characteristics(diameter,height, and radius),the product geometry is expressed by a list of the pnmitive geometries. Accordingly, the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the proper sequence of operations for the part, is generated under the environment of AutoCAD. The preliminary choice of some feasible forming sequences can verify by using the finite element simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.393-396
• /
• 2003

A systematic investigation for the process design in deep drawing is necessary to improve the quality of drawn cups. This study concentrates mainly on the influence of process design strategy on the product quality. Several types of process design were chosen from initial blank of 100mm in diameter to make final cup of 50mm in diameter. Forming analysis are carried out to find out optimal design in terms of drawing force. We assume that the case which shows minimum drawing force in the subsequent operations is the best case. Through experiments it is found that the case which shows minimum drawing force also results in minimum drawing force and better product quality than other case. Thus, it is shown that this design strategy is very effective in the improvement of quality in drawn cups.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.11-14
• /
• 2001

A systematic construction and re-use of technology related to the product development and production has been the most important for the semiconductor industry dependent on process and equipment. Therefore, numerous outputs in the form of paper has been produced in the process of information management ranging from the creation to recycling and disposal of technologies. In this research, the technology and documents necessary for the business management in the field of semiconductor manufacturing were classified in an effort to solve problems while the modeling of document management architecture at the enterprise level was performed by properly setting up the security system to prevent the unauthorized disclosure of the product development technology to the third parties. Especially, the product and process specification are designed in such a way as to ensure a real-time response in interface with the production system in order to shorten the development lead-time and improve the productivity. This paper is to discuss the modeling approach, the strategy to construct the system and its results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.691-696
• /
• 1995

Currently the systematic approaches to implementing CALS and reducing time-to-market are widely used, which is based on the concept of PDM. The concept of PDM is to maximize the time-to-market benefits of concurrent engineering while maintaining control of product data and distributing, it automatically to the people who need it - when they need it. In this paper, we developed PRO browser with these PDM functions which have the functions of managing the information of product, process and organization consistently and inter-referencing efficiently the data required in enaluation. In the PRO browser, throughout the design process improvement, the generic environments are embodied which make it possible to reduce product development sycle time and improve the quality of design.

• 한국경영과학회지
• /
• 제22권2호
• /
• pp.125-137
• /
• 1997

We are concerned with the packing policy determines the optimal packing of products with variable sizes to minimize the penalty costs for idle space and product spliting. Optimal packing problem is closely related to the optimal packet/record sizing problem in that randomly generated data stream with variable bytes are divided into a unit of packet/record for transmitting or storing. Assuming the product size and the production period are independently determined by renewal process, we can approximate the renewal process and formulate the optimization problem that minimize the expected packing cost for a production period. The problem is divided into two cases according to whether a product is allowed to split or not. Computational results for various distributions will be given to verify the approximation procedure and the resulting optimization problem.

• 지식경영연구
• /
• 제5권2호
• /
• pp.25-51
• /
• 2004

The purpose of this study is to investigate the knowledge creating pattern of technology catching-up and pioneering phase in the new product development process. This paper first reviews the knowledge conversion, absorptive capability, learning orientation and the trigger of learning. The paper then presents the integrative model of knowledge creating. Based on the integrative model, in-depth case analysis was conducted on the new product development process in Phicom. As a result, the paper discuss that the pattern of absorptive capability building, knowledge conversion and knowledge transfer is different from technology catching-up and pioneering phase. Finally, the implications and limitations of the study are discussed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.381-391
• /
• 2009

현재 기업에서는 제품인증과 경영시스템인증의 신뢰성 확보가 중요한 과제이다. 이는 제품개발 중심에서 제품 및 프로세스의 통합 개발 중심으로 연구의 필요성을 제시 해주고 있다. 따라서, 정적인 제품인증에서 동적인 시스템인증의 필요성이 대두되면서 신뢰성경영시스템(DMS; Dependability Management System; IEC60300)이 요구되어진다. 제품개발의 프로세스에서 발생되는 신뢰성 문제점들을 해결하기 위하여 트리즈(TRIZ ; Theory of Inventive Problem Solving) 기법을 활용하였다. 본 연구에서는 창의적 문제해결 방법론인 트리즈기법을 활용하여 신뢰성경영시스템에서 제품 및 프로세스 통합개발(IPPD; Integrated Product and Process Development)을 하고자 한다. 결과적으로 창의적 신뢰성경영시스템(CDMS; Creative Dependability Management System)을 제품 및 프로세스 통합개발 모델로 제시한다.