• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.94-103
• /
• 2016

This study analyzed the cause and liability of a car fire. The car was purchased 1 year ago and had traveled 8,500 km. When the car stopped at a red right and was about to start when the light turned green, the car next to it sounded itsa horn. As a result, the driver stopped the car and found that there was a fire in the engine compartment, which the fire brigade subsequently extinguished. This car fire may have been caused by an electrical spark from a screw hook inserted into the battery + terminal. Therefore, the courts decided that the car owner or driver was not responsible for the fire, because the electrical spark from the hook that caused it resulted from the automaker's manufacturing defect.

• Journal of Families and Better Life
• /
• v.2 no.1
• /
• pp.165-177
• /
• 1984

The purpose of this study was to investigate satisfaction with the function of interior space of apartment and factor which influence it, and then to provide housing practitioners with basic data for more desirable apartment interior environment. On the basis of the review of literature, questionnaire was developed. The sample was classified into type of unit floor plan and house size of 17 districts in Seoul. 139 households were selected in three districts which were the first three regions of high apartment density. Data were analyzed by computer using frequency, percentage, mean, standard deviation, F-test, Duncans multiple range test, η2 , person's product moment correlation coefficient. the results are as follows: Factors which influence satisfaction with the functionality of interior were household size and family life cycle as sociodemographic variable, and type of unit floor plan as physical variable. It was shown that the satisfaction with the functionality of interior was related to satisfaction with the external environment. More specifically, (1)the smaller a household size was the more the owner became satisfied. (2)households were in the stage of establishment in the family life cycle and households with C type of unit floor plan showed higher degree of satisfaction. (3) satisfaction with the functionality of interior had positibly related to satisfaction with the external environment.

• IE interfaces
• /
• v.12 no.2
• /
• pp.319-328
• /
• 1999

Today, offshore design field is concerned with system integration such as CIM(Computer Integrated Manufacturing), PDMS(Product Data Management System) and EDMS(Engineering Data Management System) in order to cope with the change of engineering specification as owner's requirements during construction stage of the project. This paper deals with the case study that describes about the efficient interface between material control system and 3D CAD system to support the design process in offshore industry using design rules involved the designer's knowledge. In this paper, we constructed an information system, called knowledge-based CAD interface systems, which is composed material code management system and 3D specification generator which automatically creates 3D catalogue anti specification by linking the material code, called short code, and the specification components of the 3D CAD system. As a result of the construction, it is possible to maintain consistency of the design process, and through reduction of the design processing time and improvement of the design process, competitiveness is improved.

• Journal of the Korean Society of Safety
• /
• v.22 no.6
• /
• pp.74-80
• /
• 2007

In manufacturing industry, machining technology for metal cutting processes has been considered traditional and economic dimensions such as production cost, production time and quality of a final product. However, owing to governmental regulations and the change of owner's cognizance, the safety of the workers becomes important in those fields. In this paper, the operation planning system developed as a key component of CAPP(Computer Aided Process Planning) system is introduced for milling operations. The main issue in the system is to determine the cutting conditions in achieving a balanced consideration of productivity and worker's safety. For this reason, the system performs the modification process of standard cutting conditions to satisfy those requirements. Related to machining safety in metal cutting, representative and habitual mistakes that operators perform without considering carefully the characteristic of machine or work piece are described and then the detailed algorithm and functions of the developed system is introduced and discussed.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1133-1146
• /
• 2015

This paper examines how a Computer Engineering Graduate student team ran their Advanced Software Engineering Capstone project using SCRUM. The environment provided contextual challenges in terms of the on-site customer and upfront requirements document, not uncommon in a document driven single-step methodology. The paper details the methodology and practices used to run the project, and reflects on some of the challenges faced by the members of a typical software team when transitioning to a SCRUM process. The paper concludes by evaluating the success of the techniques and practices compared to the Agile Manifesto and Henrik Kniberg's Scrum checklist. The project was undertaken at South Korea's Ajou University.

• Journal of Information Technology Applications and Management
• /
• v.29 no.1
• /
• pp.1-28
• /
• 2022

To realize the vision of internet of things (IoT), where it is expected to bring significant impact to the global economy in the future, consideration of business models in the IoT context is necessary. This research attempts to build an enhanced artifact business model framework based on the definitions of IoT and literature on business models for analysis of IoT businesses. The framework is used to analyze four different types of players: the owner of things, vendors of devices, providers of connectivity and providers of IoT application services. The findings suggest that the owners of things tend to partner with ICT players to complement their weakness, and it tends to be connectivity providers. The device vendors leverage their strength of devices and device platforms to attract and enable 3rd party sensor/devices to interconnect, while the service providers are aiming to penetrate into customer premise. These lead to the following recommendations for non-IT players to consider in expanding into IoT business: 1) take into account differences in product development process between IT and non-IT businesses in expanding into IoT market; 2) collaborate with ICT players that acknowledge and understand the differences.

• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.215-229
• /
• 2015

The purpose of this study was to identify the management situation and development plan targeting private bakery owners who are doing business in major cities. For research, the questionnaire survey was conducted targeting 69 owners who are operating bakery at the point of data collection, and the data were analyzed using frequency analysis and paired-sample t-test using SPSS. The results of the study were as follows. Owners' baking career and management career were mostly more than 10 years. They are currently managing bakeries with at least 4 competing bakeries and point out franchise-type bakeries as major competitors. Also, they responded that the most important factor for strengthening competitive edge of shop was employees and that the enhancement in technology and employees with adequate techniques are important for improving sales. Also, the result of paired sample t-test revealed that the communication had the biggest difference between importance and satisfaction perceptions among taste, sanitation, service, price, product, location, and communication. Limitations and future research directions are also discussed.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2010

Construction Projects have mutual collaborative structures among various participants for common objectives. Most of all the design project which is the initial phase in the project is crucial for determining project overall quality and requires intimate and continuous relations between project participants. Thus, this study suggests Design Collaboration Management System for successful performing projects through cooperation among participants in the initial stage of projects. First, expert interviews were performed to figure out present conditions of design collaboration management and problems. The factor analysis was applied to draw owner's collaboration factors and engineer's collaboration factors. Based on those factors, this study suggests design cooperation management process which gives a framework for systematic management method. Through the process the design collaboration management system was developed which helps owner/designers/engineer's co-work. The System suggested from this study realizes systematic information management tool and through that it is expected to improve design product;'s quality, and further contribute the advancement of project.

• The Journal of Fisheries Business Administration
• /
• v.36 no.3 s.69
• /
• pp.119-139
• /
• 2005

The purpose of this paper is to provide information that will help both fishing industry and fisheries authority understand the principals of individual transferable quota(ITQ) fishery management. Theoretical frameworks and primary features of ITQ fishery managemenet are the assignment of exclusive property rights for harvest of common - property fisheries resources. An ITQ fishery management is fundamentally different from the conventional fishery management and it gives an individual fisherman the right to catch a specified quantity of fish, his quota. With ITQ, fisherman's quotas are transferable, in whole or in part. An ITQ is a property with certain rights of use, namely, the right to catch a given quantity and species of fish in a specific location during a specific period of time. The right is exclusive in the sense that no one else has the right to use the quota without the owner's permission. The property may be assigned, traded, and exchanged; i.e., the owner has the right to transfer an ownership to others. An ITQ fishery management leads to both economic efficiency and resource conservation. Motivations to overexploit stocks and to overcapitalize should be lessened because fishermen no longer have to compete for limited resources. There are significant positive net benefits and advantages with ITQ fishery management than without. The potential benefits and advantages of ITQ fishery management include increased profits, economic stability, improved product quality, safer working conditions, less gear conflict, elimination of the race - to - fish phenomenon, less by - catch, less gear loss, improved investment climate, mitigation of market gluts, waste reduction, addition to fisherman's wealth, and compensation for fisherman exiting the fishery. As an independent observe to Red Crab Trap Fishery some of the benefits, problems, and effects, an ITQ fishery management in Red Crab Trap Fishery is still far from to be implemented. Many different and difficult aspects (biological, socioeconomics, administrative) are involved considering the implementation of ITQ fishery management in Red Crab Trap Fishery. Among other fishery management tools, the implementation of ITQ fishery management in Red Crab Trap Fishery is considered to be the best in achieving the better conservation of fisheries resources and their more economic and rational exploitation. Korean fisheries authority should pay great attention to the experience of the economic effects of the ITQ fishery management in Red Crab Trap Fishery in the hope of being able to implement at least some of those experiences into the Korean fishery management.

• Journal of Venture Innovation
• /
• v.7 no.1
• /
• pp.131-149
• /
• 2024

This study was important considering the prevalence of small business owners in the Korean economy and the challenges they faced amidst an economic downturn. The business performance of these owners was crucial for their survival. Thus, an empirical analysis was conducted to identify factors influencing their management performance. The analysis included personal characteristics of small business owners such as innovativeness, management capability, need for achievement, and technical capability as independent variables, along with product differentiation factors. Additionally, the moderating effect of social capital on these variables and their impact on management performance was tested. To achieve this, a survey targeting small business owners across Korea was conducted, and data from 250 respondents were utilized. Hierarchical regression analysis using SPSS 24.0 was employed for the empirical analysis. The results indicated that management capability, need for achievement, and product differentiation significantly positively impacted business performance. However, the impact of innovativeness and technical capability was not tested. The influence of the variables on business performance ranked as follows: product differentiation, management capability, and need for achievement. The moderating effect of social capital was significant in the relationship between management capability, need for achievement, and management performance, enhancing these relationships. However, the moderating effect of social capital on the relationship between innovativeness, technical capability, product differentiation, and management performance was not tested. These findings underscored the importance of management capability, need for achievement, and product differentiation as key factors affecting the management performance of Korean small businesses. This study was significant as it provided insights into improving the management performance of small business owners in challenging economic conditions by highlighting how the influence of these factors varied depending on the social capital possessed by the owners.