• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.257-262
• /
• 2012

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. Rotating cylinder FAC test facility was designed and fabricated and then performance of the facility was evaluated. The facility is very simple in design and economic in fabrication and can be used in material and chemistry screening test. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO), and temperature. Fluid velocity is controlled with rotating speed of the cylinder with a test specimen. FAC test of SA106 Gr. B carbon steel under 4 m/s flow velocity was performed with the rotating cylinder at DO concentration of less than 1 ppb and of 1.3 ppm. Also a corrosion test of the carbon steel at static condition, that is at zero fluid velocity, of test specimen and solution was performed at pH from 8 to 10 for comparison with the FAC data. For corrosion test in static condition, the amount of non adherent corrosion product was almost constant at pH ranging from 8 to 10. But adherent corrosion product decreased with increasing pH. This trend is consistent with decrease of Fe solubility with an increase in pH. For FAC test with rotating cylinder FAC test facility, the amount of non adherent corrosion product was also almost same for both DO concentrations. The rotating cylinder FAC test facility will be further improved by redesigning rotating cylinder and FAC specimen geometry for future work.

• 한국의류학회지
• /
• 제30권7호
• /
• pp.1126-1134
• /
• 2006

The purpose of this study was to examine the effect of brand identification of fashion luxury product on brand loyalty and the mediating effect of brand affect. The questionnaire developed through the literature search and a survey was conducted both in on-line and off-line questionnaire simultaneously. Finally 227 data from women who had a buying experience of fashion luxury products were analyzed using frequency, factor analysis, ANOVA, t-test, regression analysis by SPSS for WIN program. The results were as follows. First, the consumers' brand identification was composed of three factors; actual, ideal, social. Second, the brand identification significantly influenced on the brand loyalty. Third, the brand identification significantly influenced on the brand affect. Fourth, the brand affect significantly influenced on the brand loyalty. Fifth, the brand identification had both direct and indirect effects on brand loyalty mediated by brand affect. The results indicated that causal relationship was existed among these three variables.

• 복식문화연구
• /
• 제17권1호
• /
• pp.1-14
• /
• 2009

The purpose of this study was to examine consumers' brand attachment of fashion luxury product by emotional approach of brand loyalty. The questionnaire developed through the literature search and a survey was conducted both in on-line and off-line questionnaire simultaneously. Finally, 218 data from women who had a buying experience of fashion luxury products were analyzed using frequency, factor analysis, ANOVA, t-test, regression analysis by SPSS for WIN program. The results were as follows; First, there were significant differences in brand loyalty according to consumers' age, marriage yes or no, occupation, education level, and income. Second, the consumers' brand attachment of fashion luxury products was composed of five factors; emotional, dependent, attractive, knowledge, interest. Third, there were significant differences in brand loyalty according to consumers' age, marriage yes or no, occupation, education level, and income. Fourth, there were significant differences in brand attachment according to consumers' age, marriage yes or no, occupation, education level, and income. There were significant differences in emotional, dependent, attractive, knowledge, interest dimension of brand attachment according to consumers' age, sex, marriage yes or no, occupation, education level, and income. Fifth, the brand attachment significantly influenced on the brand loyalty.

• 복식문화연구
• /
• 제16권6호
• /
• pp.1076-1086
• /
• 2008

The purpose of this study were to examine the effect of consumer-brand relationship of fashion luxury product on brand loyalty and the mediating effect of consumer satisfaction. The questionnaire developed through the literature search and a survey was conducted both in on-line and off-line questionnaire simultaneously. Finally 227 data from women who had a buying experience of fashion luxury products were analyzed using frequency, factor analysis, ANOVA, t-test, regression analysis by SPSS for WIN program. The results were as follows. First, the consumers' brand identification was composed of three factors; self-connection, interdependence, attachment. Second, the consumer-brand relationship significantly influenced on the brand loyalty. Third, the consumer-brand relationship significantly influenced on the consumer satisfaction. Fourth, the consumer satisfaction significantly influenced on the brand loyalty. Fifth, the consumer-brand relationship had both direct and indirect effects on brand loyalty mediated by consumer satisfaction. The results indicated that causal relationship was existed among these three variables.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.49-55
• /
• 2002

A new method is proposed for the on-line measurement of the fiber orientation of sheet materials. The measurement of fiber orientation is very important in manufacturing paper sheets, non-woven fabrics, and glass sheets, because fiber orientation strongly affects product properties represented by, for example, dimensional stability of paper. A method developed in this research utilizes anisotropy of dielectric constants of sheet materials as a key characteristic to determine the fiber orientation. The new on-line sensor, consisting of 5 microwave dielectric resonators set in different directions, was designed to detect the fiber orientation while paper is running with high speed on a paper machine. This sensor can determine the direction and the degree of fiber orientation from the measured direction of the maximal dielectric constant and its variation, respectively. The fundamental performance of this system was examined by the static measurement of printing grade paper, which gave a satisfactory result. Then, the dynamic measurements were done at a speed of 1,000 m/min by using a high-speed test-coating machine.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권2호
• /
• pp.76-84
• /
• 2002

On-line conversion estimation of enzymatic esterification reactions in solvent-free media was investigated. In principle, conversion to ester can be determined from the amount of water produced by the reaction, because water is formed as a by-product in a stoichiometric manner. In this study, we estimated the water production rate only from some measurements of relative humidity and water balances without using any analytical methods. In order to test the performance of the on-line conversion estimation, the lipase-catalyzed esterification of n-capric acid and n-decal alcohol in solvent-free media was performed whilst controlling water activity at various values. The reaction conversions estimated on-line were similar to those determined by offline gas chromatographic analysis. However, when the water activity was controlled at higher values, discrepancies between the estimated conversion values and the measured values became significant. The deviation was found to be due to the inaccurate measurement of the water content in the reaction medium during the initial stages of the reaction. Using a digital filter, we were able to improve the accuracy of the on-line conversion estimation method considerably. Despite the simplicity of this method, the on-line estimated conversions were in good agreement with the off-line measured values.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.427-431
• /
• 2020

In this Study, as the structure of IT module for smart phone display becomes thin to catch up with slim product trend, the reliability of display module is on the rise as a issue for product design. Especially, almost part of cellular phone should undergo thermal dissipation test. thus many manufacturers have considered design guide line using CAE and simulation for more effective usage of limited resources on the market. This test simulates the case when cellular phone slips through user's fingers while he is talking on the phone. This paper studies a thermal simulation of display module in smart phone. This design for reliability improvements are suggested on the basis of the results of FVM Analysis and display of IT module and smart phone design.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권2호
• /
• pp.91-103
• /
• 2012

Tubular markers for road safety facilities are used to lead the driver's sight line and separate the lanes on the road. Such tubular markers are usually installed on the road and frequently hit by vehicles, they are accordingly requested to assure the product durability. The traditional evaluation method of tubular markers include only quality tests of the material properties. However, most of consuming agencies in charge of road management at fields have proposed problems on long-term performance of the products hit by vehicles under various weather conditions. Therefore, the objectives of this study are to develop the reliability test methods and equipments to simulate the product failures of tubular markers due to vehicle collision and wheel compression and the delamination and discoloration of reflection sheets attached on the surface of the products under high and low temperatures.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.527-534
• /
• 1987

This paper proposes a new syndrome-testable design method for large MOSPLA's. In the conventional syndrome test method, the testing array circuit for testability is added but it has the defect that the circuit gives effect on the normal operation of the basic PLA circuit. Therefore, by adding the shift registers to the product lines of the basic MOSPLA's this defect is eliminated and the number of test patterns is decreased. In order to reduce the number of fault free syndromes to be predetermined, also, one output line, which is connected to all product lines is added. Therefore the number of output lines be observed is decreased. And the analytical method to compute fault free syndromes is presented. By unsing this method, the time and the effort to compute the syndromes are decreased.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.381-385
• /
• 2019

In this Study, as the structure of smart phone display becomes thin to catch up with slim product trend, the reliability of display module is on the rise as a issue for product design. Especially, almost part of cellular phone should undergo drop test when they fall 1.5m above ground. Thus many manufacturers have considered design guide line using CAE and simulation for more efficive usage of limited resources om the martket. This test simulates the case when cellular phone slips through user's flingers while he is talking on the phone. This paper studies a drop simulation of glass for display in smart phone. This design for reliability improvements are suggested on the basis of the results of FE Analysis and display of smart phone design.