• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.348-355
• /
• 2008

With recent development of internet, a lot of people use online games through internet networks. Since people that utilize the online games increase, a special company and an advertisement company adopt the PPL(Product in Placement) on online game instead of the advertisement through TV or radio. This paper persents applications of the PPL on online games and problems which was occurred by them. We propose an advertisement system architecture which processes it efficiently. To prove that our proposed PPL system on online game is efficient, we process various questionnaires on PPL efficacy in online game and analyze them.

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.133-138
• /
• 2014

The present study was carried out to assess the basic material properties and thermal behavior of light-weight foamed concrete panel mixed with PCM (Phase Changing Material). To do so, this study fabricated light-weight foamed concrete (1.0kg/m3) in pre-foaming method and mixed it with PCM micro capsule of 1-dodecanol and melamine to examine its physical and thermal properties. The results confirmed strength reinforcement effect by proper replacement ratio of fly-ash, which is an industrial by-product, and PCM. In addition, it found out that PCM-mixed light-weight foamed concrete had time delay and temperature reduction effect within the range of PCM phase transition according to the rise of outdoor temperature. It was also observed that the insulation performance of PCM-mixed light-weight foamed concrete was more dependent upon thickness than PCM replacement ratio.

• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.83-92
• /
• 2016

Tolerances are defined as the allowable variations in the geometry and positioning of parts in a mechanical assembly for assuring its proper functionality. Tolerance analysis is the activity related to estimating the potential accumulated variation in assemblies. If the estimated variances go out of the specified ranges, it causes the quality problem. Thus, we should adjust the tolerances and this activity is called as tolerance design. In this paper, a case study on the accumulated tolerance analysis and design using Monte Carlo simulation is introduced, which is applied for developing a portable medical device. Using the simulation study, we can improve the assemblability and functionality of the product.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.2
• /
• pp.157-168
• /
• 2014

In this paper, HSE (Health and Safety Environments) research with smart device and biometrics is conducted for the worker's HSE enhancement in the manufacturing shop floor. Today, various kinds of smart devices are popularized extensively. In addition, the wearable type devices are being introduced such as google glass very recently. Smart device of werable type is exptected to bring great opportunity out in terms of HSE functionality. Smart devices of phone or tablet type are being used for on-line work between control center and manufacturing shop floor by virtue of wireless communication. However, those devices are not appropriate for detecting of worker's physical senses such as temperature and pulse. In this paper, we developed a glass type smart device and required funictions for HSE enhancement with the investigation of biometrics technology. Also, required sensors are investigated for the detecting of temperature, pulse and noxious gasses. Smart device of glass type has advantages in that most senses of personnel are gathered around faces, and also it's possible to detect neutral axis of body because the wearing location is fixed. We expect that the proposing HSE product of glass type smart device could contribute the enhancement of the HSE of manufacturing shop floor.

• Journal of the Korean housing association
• /
• v.13 no.4
• /
• pp.19-26
• /
• 2002

Despite its relatively small size, at least compared to other architectural programs, the house figures large in the cultural imagination. Closely identified with the individual and nuclear family, it has been frequently considered as an expression of widely held, even universal, values. Conversely, the private house has also been emblematic of more subjective desires, that change not only from person to person but from generation to generation. Certain conclusions can be drawn about the status of the private house at the end of the century, both as cultural invention and as a product of the autonomous discipline of architecture. The contemporary loftlike living space is similarly associated with work, given its emergence as an alternative home for individuals wanting space in which to live and work. In the case of what might be called the "un-private house", it is ofen a digital presence and the change of family system. This study was conducted to define the un-private house through public/private. The architectural characteristics of un-private house are as follows; 1) Alternatives- large open space with multiple function and collective free plan 2) Dematerialization- steel and glass with visual openness and ambiguity 3) Digital & Interfaces- fold and screen using technology and program. Especially, the un-private house is designed to provide individuals with emotional, superficial, and synergistic space, focusing on the personal life-style.

• Convergence Security Journal
• /
• v.15 no.3_2
• /
• pp.71-76
• /
• 2015

Global companies are building global production network for the demand of the global market. However, the establishment and operation of overseas plants make the unexpected case like theft, low will to produce and salary issue of local workers. Thus in this paper, we propose the raw materials loss prevention model based on IP Camera and RFID Box for raw materials management of overseas plants. This model can prevent the theft or loss of raw materials write inventory up in real-time. This model can be allows us to realize the cost-effective production management because it enables remote inventory management. And this model can prevent brand image danage and profit loss due to reject product.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.113-119
• /
• 2004

As Building Integrated Photovoltaic(BIPV) system replaces the conventional building finishing materials with PV modules, two function of electricity generation and building envelope can be expected. Therefore BIPV can be a good alternative technology for the 21 century environment-friendly buildings. The objective of this paper is to develope BIPV modules for a commercial buildings of which structure is mainly light-weight, curtain wall system. Two types of module are developed for a opaque part and a transparent part of building envelope. Current technology level and market status of Korea determines the configuration of developed BIPV modules. Architectural considerations for the integration of PV module to building envelope such as building structure, construction type, safety, regulation, maintenance etc. have been carefully reflected from the early stage of BIPV module design. Especially the survey result of current building envelope materials determines the size of unit BIPV modules and a unique cladding method for PV module installation is developed. Trial product of BIPV modules and cladding hardwares are manufactured and sample construction details for a demonstration building are proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.151-156
• /
• 2016

The IoT technology and sensors used for collecting the environment information has rapidly increased the number and type. With the increasing need for this type of sensor effective system for selecting and testing the sensor nodes for the IoT to develop products and services. In this study, we design and implement IoT sensor testing system for IoT service and product. In order to support rapid prototyping, the proposed system provides testing and management tools for IoT sensor nodes. We analyze the requirements of the proposed system and design the system based on the functional component-specific design. Finally, we implement testing application to verify the functional elements of the proposed system.

• Nuclear Engineering and Technology
• /
• v.41 no.1
• /
• pp.91-98
• /
• 2009

The "3+3 Process" for safety critical software for nuclear power plants' I&C (Instrumentation and Control system) has been developed in this work. The main idea of the "3+3 Process" is both to simplify the software development and safety analysis in three steps to fulfill the requirements of a software safety plan [1]. The "3-Step" software development process consists of formal modeling and simulation, automated code generation and coverage analysis between the model and the generated source codes. The "3-Step" safety analysis consists of HAZOP (hazard and operability analysis), FTA (fault tree analysis), and DV (design validation). Put together, these steps are called the "3+3 Process". This scheme of development and safety analysis minimizes the V&V work while increasing the safety and reliability of the software product. For assessment of this process, validation has been done through prototyping of the SDS (safety shut-down system) #1 for PHWR (Pressurized Heavy Water Reactor).

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.404-410
• /
• 2017

In order to help decision-makers in the early design phase to improve and make more cost-efficient system safety and reliability baselines of aircraft design concepts, a method (Multi-objective Optimization for Safety and Reliability Trade-off) that is able to handle trade-offs such as system safety, system reliability, and other characteristics, for instance weight and cost, is used. Multi-objective Optimization for Safety and Reliability Trade-off has been developed and implemented at SAAB Aeronautics. The aim of this paper is to demonstrate how the implemented method might work to aid the selection of optimal design alternatives. The method is a three-step method: step 1 involves the modelling of each considered target, step 2 is optimization, and step 3 is the visualization and selection of results (results processing). The analysis is performed within Architecture Design and Preliminary Design steps, according to the company's Product Development Process. The lessons learned regarding the use of the implemented trade-off method in the three cases are presented. The results are a handful of solutions, a basis to aid in the selection of a design alternative. While the implementation of the trade-off method is performed for companies, there is nothing to prevent adapting this method, with minimal modifications, for use in other industrial applications.