• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.743-748
• /
• 2019

This study focuses on the simulation of wet flue gas desulfurization process for improving the production of gypsum by the utilization of low-grade limestone. At present, high-grade limestone with a $CaCO_3$ content of 94% is used for producing merchantable gypsum. In modeling process, a lot of reactions are considered to develop model. First, the limestone dissolution is simulated by RSTOIC model. Second, SOx absorption and crystallization is used by RCSTR model. Finally the gypsum is separated by using SEPERATORS model. Modeling steps make it easy to reflect further side reactions and physical disturbances. In optimization condition, constraints are set to 93% purity of gypsum, 94% desulfurization efficiency, and total use of limestone at 3710 kg/hr. Under these constraints, the mass flow of low-grade limestone was maximized. As a result, the maximum blending quantity of low-grade limestone for 2,100 kg of high-grade limestone that satisfies constraints is about 1,610 kg.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.313-320
• /
• 2018

In the spring of 2018, opened-flowers of fruit trees were frozen to death due to abnormal low temperature around Jeonbuk Province and southern Gyeonggi Province areas. In the 2000s, abnormal weather is observed all over the world very frequently. As a consequence, various sectors of the society suffer from economic damage and negative effects of the abnormal weather. Moreover, recent global climate change is believed to increase the incidence of extreme weathers, which are out of the normal range of the local climate. It is necessary to identify these abnormal weather phenomena accurately and analyze the effects of them on crops in order to understand the effects of them on crop yields. This study projected the trend of the low-temperature occurrence in the future by predicting the changes in future flowering dates and quantifying the temperature distribution after flowering using climate change scenarios. This study targeted areas actually producing a major portion of pear, peach, and apple in South Korea. The results of this study predicted that the flowering dates of these fruits will be approximately 20 days earlier than the current normal year in the future (2071-2100) for the study area. Moreover, it was found that the distribution of low temperature would vary by fruit type and region to some degree. The results of this study present only a portion of fruit trees cultivars grown in South Korea. It was expected that, when this approach is applied to various crops and fruit trees, it will be possible to contribute to preparing countermeasures for climate change in the agricultural sector.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.45-52
• /
• 2019

$TiO_2$ as a raw material for producing titanium can be produced by carbon reduction of natural ilmenite ores over 1823 K and acid leaching of the obtained titanium-rich slag. However, the conventional process can cause very high energy consumption and a large amount of leaching residues. In the present study, we proposed the sulfurization of $FeTiO_3$ with $Na_2SO_4$ at temperatures below 1573 K, which can separate Fe in $FeTiO_3$ as the FeS based sulfide phase and Ti as the $TiO_2-Na_2O$ based oxide phase. This study is a fundamental study for sulfurization of $FeTiO_3$ to investigate the influence of reducing atmosphere, reaction temperature and the sulfur/Fe ratio on the separability and distribution behaviors of of Fe, Ti, and Na between the oxide phase and the sulfurized phase. At 1573 K and carbon saturation condition, the Fe can be separated from $FeTiO_3$ as Fe-C-S metal and a part of FeS, and the concentration of Fe in oxide decreased to 4 mass% after sulfurization.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.320-325
• /
• 2021

In this study, an optimization for the production of water emulsion was designed by adding an extract of wheat sprout, which is known to contain a large amount of antioxidants. The central composite design of reaction surface analysis method (CCD-RSM) was used for the optimization process. The amount of emulsifier, emulsification time, and added amount of wheat sprout extract were selected as independent variables based on our preliminary experiments. The mean droplet size (MDS), viscosity, and emulsion stability index (ESI) were set as the responses to evaluate the stability of the emulsion. For each independent variable, the P-value and coefficient of determination were evaluated to verify the reliability of the experiments. From the result of CCD-RSM, optimum conditions for the emulsification were determined as 23.6 min, 7.7 wt.%, and 3.9 wt.% for the emulsification time, amount of emulsifier, and amount of sprout, respectively. From the optimized condition obtained, MDS, viscosity, and ESI after 7 days from reaction were estimated as 252.3 nm, 616.7 cP, and 88.7%, respectively. The overall satisfaction was 0.9137, which supported the validity of the experiments, and the error rate was measured at 0.5% or less by advancing the experiments. Therefore, an optimized process for producing an emulsion by adding the malt extract was designed by the CCD-RSM.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.32 no.1
• /
• pp.171-197
• /
• 2021

The purpose of this study is to suggest the ways of improving systematic records management based on the results of analyzing the present records management situation of college and department in an university which is operating archives. To achieve the purpose, survey and interview of the persons in charge of producing and managing the administrative documents of college and department were conducted. Furthermore, actual condition investigation of records management of college and department and university archives were analyzed. According to the results of analysis, the following problems were found: 1) lack of sufficient records management by college and department, 2) lack of understanding of tasks by processing staffs, 3) operational problems of university archives. Based on the results, recommendations were made as follows; First, it is necessary to improve an awareness of records management by operating staffs. Second, it is necessary to educate staffs through the development of training programs reflecting the characteristics of the university and set up guidelines for records management by college and department. Third, it is necessary to execute reorganization and supplement the personnel of university archives.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.81-91
• /
• 2021

Synthetic Apreture Radar (SAR) is attracting attentions with its possibility of producing high resolution data that can be used for soil moisture estimation. High resolution soil moisture data enables more specific observation of soil moisture than existing soil moisture products from other satellites. It can also be used for studies of wildfire, landslide, and flood. The SAR based soil moisture estimation should be conducted considering vegetation, which affects backscattering signals from the SAR sensor. In this study, a SAR based soil moisture estimation at regions covered with various vegetation types on the middle area of Korea (Cropland, Grassland, Forest) is conducted. The representative backscattering model, Water Cloud Model (WCM) is used for soil moisture estimation over vegetated areas. Radar Vegetation Index (RVI) and in-situ soil moisture data are used as input factors for the model. Total 6 study areas are selected for 3 vegetation types according to land cover classification with 2 sites per each vegetation type. Soil moisture evaluation result shows that the accuracy of each site stands out in the order of grassland, forest, and cropland. Forested area shows correlation coefficient value higher than 0.5 even with the most dense vegetation, while cropland shows correlation coefficient value lower than 0.3. The proper vegetation and soil moisture conditions for SAR based soil moisture estimation are suggested through the results of the study. Future study, which utilizes additional ancillary vegetation data (vegetation height, vegetation type) is thought to be necessary.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.82-88
• /
• 2021

Sun-induced fluorescence (SIF) retrieval using remote sensing technique has been used in an effort to understand the photosynthetic efficiency and stress condition of vegetation. Although optical devices and SIF retrieval methodologies were established in order to retrieve SIF, the SIF measurements are domestically sparse. SIF data of paddy rice w as measured in Naju, South Korea from June 10, 2020 to October 5, 2020. The SIFs based red (O2A) and far-red (O2B) w ere retrieved using a spectral fitting method and an improved Fraunhofer line depth, and photosynthetically active radiation was also produced. In addition, the SIF data was filtered considering solar zenith angle, saturation conditions, the rapid and sudden change of solar irradiance, and sun glint. The provided SIF data can help to understand a SIF product and the filtering method of SIF data can contribute to producing high-quality SIF data.

• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2022

This paper is a purpose to study and analyze the engine starting failure examples for LPG car. The first example, the researcher verified the phenomenon that didn't supply the fuel because of filter clogging by fine alien substance in the gas valve line when he inspected the emergency cutting valve. The second example, there was no the influence of gas leakage when the solenoid operated at first. But the damage part of solenoid assemblying face wad downed a durability according to running a valve. Eventually, the researcher checked on the phenomenon of engine stopping by no gas feeding in solenoid because of leaking of gas. The third example, the researcher sought that the wiring sheaths of connector fin between EGR 10A fuse and LPG switch verified the burn-out phenomenon due to the bad contacting as tension damage produced the overheating. Therefore, the manager of a car has to do pre-inspection no producing electric failure and he must maintain his car with optimum condition.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.8
• /
• pp.967-975
• /
• 2022

Kombucha mutualistic community (KMC) is composed by acetic acid bacteria and yeasts, producing fermented tea with health benefits. As part of the BIOlogy and Mars EXperiment (BIOMEX) project, the effect of Mars-like conditions on the KMC was analyzed. Here, we analyzed metagenome-assembled genomes (MAGs) of the Komagataeibacter, which is a predominant genus in KMC, to understand their roles in the KMC after exposure to Mars-like conditions (outside the International Space Station) based on functional genetic elements. We constructed three MAGs: K. hansenii, K. rhaeticus, and K. oboediens. Our results showed that (i) K. oboediens MAG functionally more complex than K. hansenii, (ii) K. hansenii is a keystone in KMCs with specific functional features to tolerate extreme stress, and (iii) genes related to the PPDK, betaine biosynthesis, polyamines biosynthesis, sulfate-sulfur assimilation pathway as well as type II toxin-antitoxin (TA) system, quorum sensing (QS) system, and cellulose production could play important roles in the resilience of KMC after exposure to Mars-like stress. Our findings show the potential mechanisms through which Komagataeibacter tolerates the extraterrestrial stress and will help to understand minimal microbial composition of KMC for space travelers.

• Journal of Life Science
• /
• v.32 no.2
• /
• pp.119-124
• /
• 2022

To effectively isolate acetic acid bacteria for producing makgeolli vinegar, various products were researched, and Acetobacter pasteurianus CK-1, a strain that is excellent in acetic acid production, was finally isolated. The optimal growth temperature of the isolated strain was confirmed to be 30℃, and it grew well in the pH range of 5.5~6.5, with optimal growth at pH 6. A. pasteurianus CK-1 had the most active proliferation when the initial ethanol concentration in the medium was 4%, and growth was possible even at an ethanol concentration of 7%. When inoculating the isolated strain into makgeolli to induce acetic acid fermentation, the pH at the beginning of fermentation was 3.54, which was gradually lowered to 2.77 after 18 days of fermentation. The acidity was 0.75% at the beginning of fermentation and gradually started to increase from the 4th day of fermentation. The final acidity at the end of fermentation was 5.54%. In the vinegar fermented by inoculating A. pasteurianus CK-1, acetic acid content was detected to be as high as 3,575.7±48.6 mg%, and the malic acid and citric acid contents were 2,150.8±27.6 and 55.8±3.7 mg%, respectively. Further, it was confirmed that the content and ratio of the organic acids produced significantly differed depending on the type of inoculated bacterial strain. During acetic acid fermentation, the populations of yeast and A. pasteurianus CK-1 were inversely changed. In the initial stage of fermentation, yeast dominated, and after 10 days of fermentation, A. pasteurianus CK-1 slowly proliferated and reached stationary phase.