• Journal of Korean Society of Forest Science
• /
• v.73 no.1
• /
• pp.14-20
• /
• 1986

The processing times of the works, chainsaw felling, axe trimming and hand skidding to the corridor, by one-man-work method per single pole timber were investigated in the thinning young Japanese larch stand at the Training Forests of the Forest Work Tranining Center in Kangwon-do. The works were performed by a skilled worker with the craftman qualification and 69 trees were cut. Time was checked at intervals of 25/100 minute by the multimoment method and the worker's efficiency was evaluated for every cycle. Total working time was 8.11 hours of which 90% was for thinning work and 10% for cleaning work. Of the total working hours, 82.7% was net working time, 12.3% was general working time and 4.9% was non-valuated time. Of the net working time, 5.9hours, for only thinning, 20.9% was spent on moving to the feeling tree, 27.1% was spent on felling, 40.5% was spent on trimming and 11.5% was spent on skidding to corridor. Net chainsaw operating time was 0.94 hour which included 0.2 hour for cleaning work. Of the net chainsaw operating time, 0.94 hour, 66% was operating time and 34% was idle running time. The basic and general working times by DBH classes with application of 130% worker's efficiency calculated from regression equations were shown in table 1. For better practical using of this table, the simplified proposal was given in table 2.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.108-117
• /
• 2005

Pharmaceutical byproduct sludge and cosmetic industry wastewater sludge can be used as a raw material of compost. Effects of three types of pharmaceutical byproduct sludge and one type of cosmetic industry wastewater sludge on soil properties and red pepper growth were investigated in a field based concrete pot ($2{\times}2m$). These sludges and pig manure ($5Mg\;ha^{-1}$, dry basis) were incorporated into the upper of loam soil 30 days prior to transplanting red pepper. Changes in soil properties and contents of heavy metals and toxic organic compounds in soil and plant were measured. And also plant growth measurement and bioassay of soil phytotoxicity were included. Contents of heavy metals were increased in the soils treated with the sludges. Plant growth in the sludge treatments were mostly inferior to that of NPK treatment, especially in early stage. Content of N in plant was lower in all sludge treatments at early and middle growth stages, and it was especially caused by characteristics and concentration of nitrogen and organic matter of sludges. Total yield of red pepper was highest in the NPK treatment and followed by pharmaceutical sludge 3, pig manure, pharmaceutical sludge 1, and pharmaceutical sludge 2, and the yield of cosmetic sludge treatment was considerably lower than others. HEM and PAHs contents in soil of cosmetic sludge treatment were $4.80mg\;kg^{-1}$ and $2,263.2{\mu}g\;kg^{-1}$, respectively. Root elongation of lettuce exposed to the water extract of soil treated with cosmetic sludge was about 20% of that found in the test with soil extract of non fertilization treatment. At present, raw materials of compost were authorized according to the contents of organic matter, heavy metals and product processing. Toxic organic compounds analysis and bioassay would be helpful for authorization and assessment of suitability of raw materials of compost.

• Composites Research
• /
• v.36 no.1
• /
• pp.1-15
• /
• 2023

Demand for energy consumption reduction is increasing according to the development expectations of future mobility. Lightweight structural materials are known as a method to reduce greenhouse gas emissions and improve energy efficiency. In particular, fiber reinforced polymer composite (FRP) is attracting attention as a material that can replace existing metal alloys due to its excellent mechanical properties and light weight. In this paper, industrial applications and research trends of carbon fiber reinforced composites (CFRP, carbon FRP) and self-reinforced composites (SRC) were reviewed based on the reinforcement, polymer matrix, and manufacturing process. In order to overcome the expensive process cost and long manufacturing time of the epoxy resin-based autoclave method, which is mainly used in the aircraft field, mass production of CFRP-applied electric vehicles has been reported using a high-pressure resin transfer molding process including fast-curing epoxy. In addition, thermoplastic resin-based CFRP and interface enhancement methods to solve the recycling issue of carbon fiber composites were reviewed in terms of materials and processes. To form a perfect matrix-reinforcement interface, which is known as the major factor inducing the excellent mechanical properties of FRP, studies on SRC impregnated with the same matrix in polymer fibers have been reported. The physical and mechanical properties of SRC based on various thermoplastic polymers were reviewed in terms of polymer orientation and composite structure. In addition, a copolymer matrix strategy for extending the processing window of highly drawn polypropylene fiber-based SRC was discussed. The application of CFRP and SRC as lightweight structural materials can provide potential options for improving the energy efficiency of future mobility.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.79-93
• /
• 2015

With the rapid development of information technology, the ways of usage have changed drastically. The ways and efficiency of traditional service application to data processing already could not satisfy the requirements of modern users. Nowadays, users have already understood the importance of data. Therefore, the processing and saving of big data have become the main research of the Internet service company. In China, with the rise and explosion of 115 Cloud leads to other technology companies have began to join the battle of cloud services market. Although currently Chinese cloud services are still mainly dominated by cloud storage service, the series of service contents based on cloud storage service have been affirmed by users, and users willing to try these new ways of services. Thus, how to let users to keep using cloud services has become a topic that worth for exploring and researching. The academia often uses the TAM model with statistical analysis to analyze and check the attitude of users in using the system. However, the basic TAM model obviously already could not satisfy the increasing scale of system. Therefore, the appropriate expansion and adjustment to the TAM model (i. e. TAM2 or TAM3) are very necessary. This study has used the status of Chinese internet users and the related researches in other areas in order to expand and improve the TAM model by adding the brand influence, hardware environment and external environments to fulfill the purpose of this study. Based on the research model, the questionnaires were developed and online survey was conducted targeting the cloud services users of four Chinese main cities. Data were obtained from 210 respondents were used for analysis to validate the research model. The analysis results show that the external factors which are service contents, and brand influence have a positive influence to perceived usefulness and perceived ease of use. However, the external factor hardware environment only has a positive influence to the factor of perceived ease of use. Furthermore, the perceived security factor that is influenced by brand influence has a positive influence persistent intention to use. Persistent intention to use also was influenced by the perceived usefulness and persistent intention to use was influenced by the perceived ease of use. Finally, this research analyzed external variables' attributes using other perspective and tried to explain the attributes. It presents Chinese cloud service users are more interested in fundamental cloud services than extended services. In private cloud services, both of increased user size and cooperation among companies are important in the study. This study presents useful opinions for the purpose of strengthening attitude for private cloud service users can use this service persistently. Overall, it can be summarized by considering the all three external factors could make Chinese users keep using the personal could services. In addition, the results of this study can provide strong references to technology companies including cloud service provider, internet service provider, and smart phone service provider which are main clients are Chinese users.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.59-68
• /
• 1998

Digital hearing aids offer many advantages over conventional analog hearing aids. With the advent of high speed digital signal processing chips, new digital techniques have been introduced to digital hearing aids. In addition, the evaluation of new ideas in hearing aids is necessarily accompanied by intensive subject-based clinical tests which requires much time and cost. In this paper, we present an objective method to evaluate and predict the performance of hearing aid systems without the help of such subject-based tests. In the hearing impairment simulation(HIS) algorithm, a sensorineural hearing impairment medel is established from auditory test data of the impaired subject being simulated. Also, the nonlinear behavior of the loudness recruitment is defined using hearing loss functions generated from the measurements. To transform the natural input sound into the impaired one, a frequency sampling filter is designed. The filter is continuously refreshed with the level-dependent frequency response function provided by the impairment model. To assess the performance, the HIS algorithm was implemented in real-time using a floating-point DSP. Signals processed with the real-time system were presented to normal subjects and their auditory data modified by the system was measured. The sensorineural hearing impairment was simulated and tested. The threshold of hearing and the speech discrimination tests exhibited the efficiency of the system in its use for the hearing impairment simulation. Using the HIS system we evaluated three typical hearing aid algorithms.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.534-540
• /
• 2007

In this study, waxy rice starch was chemically modified using phosphorous oxychloride ($POCl_3$, 0.002-0.008%). Then the physicochemical properties of resulting cross-linked waxy rice starches were investigated in order to reduce the steeping time of Yukwa (a Korean oil-puffed rice snack) processing. The swelling powers of the cross-linked waxy rice starch samples were higher than the native waxy rice starch at temperatures above $60^{\circ}C$, and their increases were proportional to the $POCl_3$, concentration. The solubility of the cross-linked waxy rice starch was lower (1.6-3.4%) than the native waxy rice starch (2.7-6.1%). However, the moisture sorption isotherm of the cross-linked waxy rice starch was not significantly different from the native waxy rice starch. The rapid visco analyze. (RVA) pasting temperatures $(65.4-67^{\circ}C)$ of the cross-linked waxy rice starch were lower than those of the native starch $(67^{\circ}C)$. The RVA peak viscosities (287-337 RVU) of the cross-linked waxy rice starch were higher than that of native starch (179 rapid visco units (RVU)), and increased with increasing $POCl_3$ concentration. For the differential scornning calorimeter thermal characteristics, although Tc shifted toward higher temperatures with cross-linking, the To, Tp, and amylopectiin melting enthalpy of the cross-linked waxy rice starch showed no differences compared to the native waxy rice starch. The X-ray diffraction patterns of both the native and cross-linked waxy rice starches showed typical A-type crystal patterns, suggesting that cross-linking mainly occurs in the amorphous regions of starch granules. Therefore, the cross-linking reaction did not change the crystalline region, but altered the amorphous region of the waxy rice starch molecules, resulting in changes of solubility and RVA pasting properties in the cross-linked waxy rice starch. In summary, since cross-linked waxy rice starch has a high puffing efficiency and no browning reaction, it may be applicable for Yukwa processing without a long steeping process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.282-291
• /
• 1994

Optimal processing conditions and shelf-life of steamed kamaboko made from Alaska pollock surimi were investigated, including protein digestibility, computed protein efficiency ratio (C-PER), trypsin inhibitor content and protein solubility. Steamed kamaboko containing $5\%$ starch and $33\%$ water in pollock surimi showed the best protein quality in terms of C-PER and protein digestibility. Steaming could not give any significant advantage over kamaboko protein digestibility but a higher C-PER resulted from steamed kamaboko. All kamaboko products had trypsin content of 1.4 to $2.0mg\%$ which was $10\%$ of total trypsin inhibitor levels in frozen pollock meat. A two stage steaming process, the first at $40^{\circ}C$ for 20min followed by a second 10min steaming period at $95^{\circ}C$, was found to be the most effective way of the most effective heating process for kamaboko protein quality. C-PERs of marketed Korean surimi products ranged from $2.8{\sim}2.9$ for steamed kamaboko and $2.9{\sim}3.2$ for crab meat analog which were superior to ANRC casein(2.5). Measured protein digestibility of all products were ranged from 86 to $89\%$. VBN and protein solubility data suggest Korean marketed surimi products could have a shelf-life of 15 days at $4^{\circ}C$ for crab meat analog and 20 days at $4^{\circ}C$ for steamed kamaboko.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.151-171
• /
• 2015

This study examined the concepts of the Internet of Things(IoT), the major issue and IoT trend in the domestic and international market. also reviewed the advent of IoT era which caused a 'Paradigm Shift'. This study proposed a solution for the appropriate corresponding strategy in terms of Enterprise. Global competition began in the IoT market. So, Businesses to be competitive and responsive, the government's efforts, as well as the efforts of companies themselves is needed. In particular, in order to cope with the dynamic environment appropriately, faster and more efficient strategy is required. In other words, proposed a management strategy that can respond the IoT competitive era on tipping point through the vision of paradigm shift. We forecasted and proposed the emergence of paradigm shift through a comparative analysis of past management paradigm and IoT management paradigm as follow; I) Knowledge & learning oriented management, II) Technology & innovation oriented management, III) Demand driven management, IV) Global collaboration management. The Knowledge & learning oriented management paradigm is expected to be a new management paradigm due to the development of IT technology development and information processing technology. In addition to the rapid development such as IT infrastructure and processing of data, storage, knowledge sharing and learning has become more important. Currently Hardware-oriented management paradigm will be changed to the software-oriented paradigm. In particular, the software and platform market is a key component of the IoT ecosystem, has been estimated to be led by Technology & innovation oriented management. In 2011, Gartner announced the concept of "Demand-Driven Value Networks(DDVN)", DDVN emphasizes value of the whole of the network. Therefore, Demand driven management paradigm is creating demand for advanced process, not the process corresponding to the demand simply. Global collaboration management paradigm create the value creation through the fusion between technology, between countries, between industries. In particular, cooperation between enterprises that has financial resources and brand power and venture companies with creative ideas and technical will generate positive synergies. Through this, The large enterprises and small companies that can be win-win environment would be built. Cope with the a paradigm shift and to establish a management strategy of Enterprise process, this study utilized the 'RTE cyclone model' which proposed by Gartner. RTE concept consists of three stages, Lead, Operate, Manage. The Lead stage is utilizing capital to strengthen the business competitiveness. This stages has the goal of linking to external stimuli strategy development, also Execute the business strategy of the company for capital and investment activities and environmental changes. Manege stage is to respond appropriately to threats and internalize the goals of the enterprise. Operate stage proceeds to action for increasing the efficiency of the services across the enterprise, also achieve the integration and simplification of the process, with real-time data capture. RTE(Real Time Enterprise) concept has the value for practical use with the management strategy. Appropriately applied in this study, we propose a 'IoT-RTE Cyclone model' which emphasizes the agility of the enterprise. In addition, based on the real-time monitoring, analysis, act through IT and IoT technology. 'IoT-RTE Cyclone model' that could integrate the business processes of the enterprise each sector and support the overall service. therefore the model be used as an effective response strategy for Enterprise. In particular, IoT-RTE Cyclone Model is to respond to external events, waste elements are removed according to the process is repeated. Therefore, it is possible to model the operation of the process more efficient and agile. This IoT-RTE Cyclone Model can be used as an effective response strategy of the enterprise in terms of IoT era of rapidly changing because it supports the overall service of the enterprise. When this model leverages a collaborative system among enterprises it expects breakthrough cost savings through competitiveness, global lead time, minimizing duplication.

• Journal of Aquaculture
• /
• v.5 no.2
• /
• pp.127-142
• /
• 1992

A feeding experiment was carried out to investigate the availability and feasibility of fish processing by-products as a substitute for frozen round fish in moist pellet diets for flounder, Paralichthys olivaceus. A control diet was prepared by incorporating $50{\%}$ frozen horse mackerel and $50{\%}$ commercial binder feed. In test diets the frozen horse mackerel of the control diet was replaced with either tuna scrap, tuna viscera, flatfish offal, deskinned hagfish, or tuna viscera ($20{\%}$) with frozen horse mackerel ($30{\%}$). Eighty flounders, 13.4 g in mean body weight, were stocked in 12 aquaria ($250\;{\ell}$ each) and fed six experimental diets for the first 28-day experiment. For the second 23-day experiment, forty flounders,44.8 g in mean body weight, were stocked and fed the same experimental diets. All treatments were duplicated. There were no significant differences in growth, feed efficiency and nutrient utilization among fish fed experimental diets containing either frozen horse mackerel, deskinned hagfigh, flatfish offal or tuna viscera with frozen horse mackerel. However, the feeding performances of fish fed experimental diets containing tuna scrap or tuna viscera were significantly lower than those of the control diet (P<0.05). There were no significant differences among the treatments on the proximate analysis values of the whole body. However, the crude lipid content of liver of the fish fed the experimental diet containing tuna scrap was significantly lower than that of the others. The results indicate that deskinned hagfish, and flatfish offal could be successfully substituted for frozen fish portion of moist pellet diets for flounder, but tuna viscera could only be partially substituted.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.83-94
• /
• 2011

Most domestic companies, with the exclusion of major firms, are reluctant to implement a supply chain management (SCM) network into their operations. Most small- and medium-sized enterprises are not even aware of SCM. Due to the inherent total-systems efficiency of SCM, it coordinates domestic manufacturers, subcontractors, distributors, and physical distributors and cuts down on cost of inventory control, as well as demand management. Furthermore, a lack of SCM causes a decrease in competitiveness for domestic companies. The reason lies in the fundamentality of SCM, which is the characteristic of information sharing, process innovation throughout SCM, and the vast range of problems the SCM management tool is able to address. This study suggests the contemplation and reformation of the current SCM situation by analyzing the SCM strategic plan, discourses and logical discussions on the topic, and a successful case for adapting SCM; hence, the study plans to productively "process" SCM. First, it is necessary to contemplate the theoretical background of SCM before discussing how to successfully process SCM. I will describe the concept and background of SCM in Chapter 2, with a definition of SCM, types of SCM promotional activities, fields of SCM, necessity of applying SCM, and the effects of SCM. All of the defects in currently processing SCM will be introduced in Chapter 3. Discussion items include the following: the Bullwhip Effect; the breakdown in supply chain and sales networks due to e-business; the issue that even though the key to a successful SCM is cooperation between the production and distribution company, during the process of SCM, the companies, many times, put their profits first, resulting in a possible defect in demands estimation. Furthermore, the problems of processing SCM in a domestic distribution-production company concern Information Technology; for example, the new system introduced to the company is not compatible with the pre-existing document architecture. Second, for effective management, distribution and production companies should cooperate and enhance their partnership in the aspect of the corporation; however, in reality, this seldom occurs. Third, in the aspect of the work process, introducing SCM could provoke corporations during the integration of the distribution-production process. Fourth, to increase the achievement of the SCM strategy process, they need to set up a cross-functional team; however, many times, business partners lack the cooperation and business-information sharing tools necessary to effect the transition to SCM. Chapter 4 will address an SCM strategic plan and a case study of LG Electronics. The purpose of the strategic plan, strategic plans for types of business, adopting SCM in a distribution company, and the global supply chain process of LG Electronics will be introduced. The conclusion of the study is located in Chapter 5, which addresses the issue of the fierce competition that companies currently face in the global market environment and their increased investment in SCM, in order to better cope with short product life cycle and high customer expectations. The SCM management system has evolved through the adaptation of improved information, communication, and transportation technologies; now, it demands the utilization of various strategic resources. The introduction of SCM provides benefits to the management of a network of interconnected businesses by securing customer loyalty with cost and time savings, derived through the consolidation of many distribution systems; additionally, SCM helps enterprises form a wide range of marketing strategies. Thus, we could conclude that not only the distributors but all types of businesses should adopt the systems approach to supply chain strategies. SCM deals with the basic stream of distribution and increases the value of a company by replacing physical distribution with information. By the company obtaining and sharing ready information, it is able to create customer satisfaction at the end point of delivery to the consumer.