• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.100-103
• /
• 2017

Motion estimation occupies the largest computation in the video compression. Multiple processing elements are often exploited in parallel to meet processing speed. More processing elements increase processing speed, but they also increase hardware area. therefore, it is important to optimize the number of processing element. HEVC (high efficiency video coding) usually exploits multi-stage motion estimation algorithms for low computation and high performance. Since the number and position of search points are different in each stage, the utilization of the processing elements is not always 100% and the utilization is quite different with the number of processing elements. In this paper, the optimizing method is proposed on the number of processing elements. It finds out the optimal number of the processing elements for the given multi-stage motion estimation algorithm by calculating utilization and execution cycle of the processing elements.

• Clean Technology
• /
• v.23 no.3
• /
• pp.279-285
• /
• 2017

In this study, a new organophosphorus acid-based solvent (KMC-P) from KMC Co., Ltd. was used for the recovery of the iron chloride etching waste solution. In order to increase the extraction efficiency for the new solvent in the solvent extraction process, we selected the process variables and conducted the optimization experiment according to the DOE to investigate the correlation between the variables. Solvent concentration, pH, and O/A ratio were found to be factors affecting extraction and stripping efficiency. The optimum stripping efficiency was 69.7% when the solvent concentration was 29.4 wt%, the HCl addition amount was 0 mL, and the O/A ratio was 7, and the reliability was more than 86%.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.1-10
• /
• 2013

In this paper, we implement the SIFT(Scale-Invariant Feature Transform) algorithm for feature point extraction using a many-core processor, and analyze the performance, area efficiency, and system area efficiency of the many-core processor. In addition, we demonstrate the potential of the proposed many-core processor by comparing the performance of the many-core processor with that of high-performance CPU and GPU(Graphics Processing Unit). Experimental results indicate that the accuracy result of the SIFT algorithm using the many-core processor was same as that of OpenCV. In addition, the many-core processor outperforms CPU and GPU in terms of execution time. Moreover, this paper proposed an optimal model of the SIFT algorithm on the many-core processor by analyzing energy efficiency and area efficiency for different octave sizes.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.6
• /
• pp.860-867
• /
• 2012

Codonopsis lanceolata serves as, an appetizing health food for its, characteristic flavor, taste, and texture:however, it requires a long and complicated cooking process. Therefore, this study conducted pre-processing procedures to improve the cooking process and Codonopsis lanceolata more easily. For processing efficiency, freezing and blanching were efficient for peeling and the rate of peel disuse. In addition the freezing process, effectively reduced the time spent in beating raw material. In the salinity test, freezing and blanching quickly increased salinity over 28 days. As the result of SEM cross-section tests showed that frozen Codonopsis lanceolata become porous, it's assumed that seasoning permeates into this cross-section efficiently. As the appearance of Deodeok-gui as significant differences according to the pre-processing methods, this study examined pre-processing methods(time spent in peeling, rate of peel disuse, time spent in beating out material, salinity, moisture content, texture, and the color) of Codonopsis lanceolata. After testing Deodeok-gui, it was found that freezing is effective, not only for process efficiency and cooking time reduction, but also for improving its qualities.

• Journal of environmental and Sanitary engineering
• /
• v.9 no.1
• /
• pp.29-37
• /
• 1994

Anaerobic treatment of wastewater of the red- bean processing industry was carried out and discussed an anaerobic sludge bed reactor( ASBR) as a preliminary study to evaluate applicability of given processes. The dimension of reactor were same as 0.09m- ID$\times $1.5m- height. The type of substrate and the hydraulic retention time( HRT) were considered as experimental variables. The synthetic wastewater with glucose in the laboratory, the wastewater from the red bean processing industry mixed with synthetic wastewater with variation of mixing percent were fed as substrate. The hydraulic retention time was changed from one day to five days. The gas production, the methane content in produced gas, efficiencies of COD removal and 55 removal were evaluated as principal characteristics. With synthetic wastewater as a substrate and at a hydraulic retention time of one day, characteristics of ASBR was the gas production(12$\ell$/day ), the methane content of produced gas(60%), the efficiency of COD removal(92%) and 55 removal(30%). With the real wastewater and at a hydraulic retention time of one day, the gas production and the efficiency of COD removal of the ASBR decreased with the proportion of real wastewater. The gas production and the efficiency of COD removal with real wastewater only was decreased to 70% and 87% of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. With real wastewater only as a substrate in the ASBR, the gas production was decreased with an increase of HRT, but the efficiency of COD removal increased with HRTI like the usual trend reported. As a conclusion, the wastewater of the red- bean Processing industry could be treated by anaerobic digestion successfully in the ASBR.Anaerobic treatment of wastewater of the red- bean processing industry was carried out and discussed an anaerobic sludge bed reactor( ASBR) as a preliminary study to evaluate applicability of given processes. The dimension of reactor were same as 0.09m- ID$\times $1.5m- height. The type of substrate and the hydraulic retention time( HRT) were considered as experimental variables. The synthetic wastewater with glucose in the laboratory, the wastewater from the red bean processing industry mixed with synthetic wastewater with variation of mixing percent were fed as substrate. The hydraulic retention time was changed from one day to five days. The gas production, the methane content in produced gas, efficiencies of COD removal and 55 removal were evaluated as principal characteristics. With synthetic wastewater as a substrate and at a hydraulic retention time of one day, characteristics of ASBR was the gas production(12$\ell$/day ), the methane content of produced gas(60%), the efficiency of COD removal(92%) and 55 removal(30%). With the real wastewater and at a hydraulic retention time of one day, the gas production and the efficiency of COD removal of the ASBR decreased with the proportion of real wastewater. The gas production and the efficiency of COD removal with real wastewater only was decreased to 70% and 87% of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. With real wastewater only as a substrate in the ASBR, the gas production was decreased with an increase of HRT, but the efficiency of COD removal increased with HRTI like the usual trend reported. As a conclusion, the wastewater of the red- bean Processing industry could be treated by anaerobic digestion successfully in the ASBR.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.87-93
• /
• 2013

In this paper, we implemented and evaluated the performance of a vector-based rasterization algorithm of 3D graphics using a SIMD-based many-core processor that consists of 4,096 processing elements. In addition, we compared the performance and efficiency of the rasterization algorithm using the many-core processor and commercial GPU (Graphics Processing Unit) system which consists of 7 GPUs and each of which have 512 cores. Experimental results showed that the SIMD-based many-core processor outperforms the commercial GPU system in terms of execution time (3.13x speedup), energy efficiency (17.5x better), and area efficiency (13.3x better). These results demonstrate that the SIMD-based many-core processor has potential as an embedded mobile processor.

• Smart Media Journal
• /
• v.10 no.2
• /
• pp.9-15
• /
• 2021

Due to widespread construction of AMI(Advanced Metering Infrastructure), various service tends to increase, which are not only remote metering service collection measuring data but also demand management and energy saving using measuring data. In order to support a stable management of such services, it is necessary for measuring data to be processed efficiently. In this paper, we analyze a performance of measured data processing efficiency using duplicated data removal according to AMI construction purpose on real environments.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2023

Recently, there has been an increased demand for light-emitting diode (LED) due to the growing emphasis on environmental protection. However, the use of GaN-based sapphire in LED manufacturing leads to the generation of defects, such as dislocations caused by lattice mismatch, which ultimately reduces the luminous efficiency of LEDs. Moreover, most inspections for LED semiconductors focus on evaluating the luminous efficiency after packaging. To address these challenges, this paper aims to detect defects at the wafer stage, which could potentially improve the manufacturing process and reduce costs. To achieve this, image processing and deep learning-based defect detection techniques for Sapphire Epi-Wafer used in Green LED manufacturing were developed and compared. Through performance evaluation of each algorithm, it was found that the deep learning approach outperformed the image processing approach in terms of detection accuracy and efficiency.

• Journal of Information Processing Systems
• /
• v.20 no.3
• /
• pp.307-316
• /
• 2024

In the realm of large-scale identification deployments, the EPCglobal Class-1 Generation-2 (Gen2) standard serves as a cornerstone, facilitating rapid processing of numerous passive RFID tags. The Q-Algorithm has garnered considerable attention for its potential to markedly enhance the efficiency of Gen2-based RFID systems with minimal adjustments. This paper introduces a groundbreaking iteration of the Q-Algorithm, termed Time-Efficient Q-Algorithm (SwiftQ), specifically designed to push the boundaries of time efficiency within Gen2-based RFID systems. Through exhaustive simulations, our study substantiates that SwiftQ outperforms existing algorithms by a significant margin, demonstrating exceptional expediency that positions it as a formidable contender in the landscape of large-scale identification environments. By prioritizing time efficiency, SwiftQ offers a promising solution to meet the escalating demands of contemporary Internet of Things applications, underscoring its potential to catalyze advancements in RFID technology for diverse industrial and logistical contexts.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.193-197
• /
• 2012

Oxygen plasma has been treated on the surface of indium-tin-oxide (ITO) to improve the efficiency of the organic light-emitting diodes (OLEDs) device. The plasma treatment was expected to inject the holes effectively due to the control of an ITO work-function and the reduction of surface roughness. To optimize the treatment condition, a surface resistance and morphology of the ITO surface were investigated. The effect on the electrical properties of the OLEDs was evaluated as a function of oxygen plasma powers (0, 200, 250, 300, and 450 W). The electrical properties of the devices were measured in a device structure of ITO/TPD/Alq3/BCP/LiF/Al. It was found the plasma treatment of the ITO surface affects on the efficiency of the device. The efficiency of the device was optimized at the plasma power of 250 W and decreased at higher power than 250 W. The maximum values of luminance, luminous power efficiency, and external quantum efficiency of the plasma treated devices increase by 1.4 times, 1.4 times, and 1.2 times, respectively, compared to those of the non-treated ones.