• Journal of the Korean Home Economics Association
• /
• v.25 no.1
• /
• pp.35-42
• /
• 1987

Since the 1930's, a rapid development of resin processing has contributed to making our clothing life convenient and rich. Wrinkle considered as the largest defect of cellulose fiber is generated from fixation of molecules which are divided by compression or crookedness. It can be protected by building a bridge between the molecules the joint combination of the inside of the fiber. The formaldehyde reactive resin which is used in processing resin is a chemical compound with more than 2 N-methylol or N-alkoxymethylol group and a chemical compound with N-methylol shows the property of W.W and D.P through the very complex bridge-bonding reaction under the OH group of cellulose and acid catalyst. However, if the processing is excessively carried out, resin-processed textile emits the formaldehyde when the bridge bonding agent reacts to amine type under the acid condition or the formaldehyde remains in the condition of non-reaction or the resin combinates by itself, or the methylol group of non-reactive resin is hydrolyzed due to the insufficient themomagnetic treatment.

• Korean Journal of Cognitive Science
• /
• v.29 no.1
• /
• pp.39-59
• /
• 2018

To elucidate the effect of working memory (WM) load on negative facial emotion processing, we examined ERP components (P1 and N170) elicited by fearful and neutral expressions each of which was presented during 0-back (low-WM load) or 2-back (high-WM load) tasks. During N-back tasks, visual objects were presented one by one as targets and each of facial expressions was presented as a passively observed stimulus during intervals between targets. Behavioral results showed more accurate and fast responses at low-WM load condition compared to high-WM load condition. Analysis of mean amplitudes of P1 on the occipital region showed significant WM load effect (high-WM load > low-WM load) but showed nonsignificant facial emotion effect. Analysis of mean amplitudes of N170 on the posterior occipito-temporal region showed significant overall facial emotion effect (fearful > neutral), but, in detail, significant facial emotion effect was observed only at low-WM load condition on the left hemisphere, but was observed at high-WM load condition as well as low-WM load condition on the right hemisphere. To summarize, facial emotion effect observed by N170 amplitudes was modulated by WM load only on the left hemisphere. These results show that early emotional processing of negative facial expression could be eliminated or reduced by high load of WM on the left hemisphere, but could not be eliminated by high load on the right hemisphere, and suggest right hemispheric lateralization of negative facial emotion processing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.531-532
• /
• 2009

• Korean Journal of Cognitive Science
• /
• v.22 no.4
• /
• pp.449-467
• /
• 2011

This study was designed to examine the influence of task appropriate processing on prospective memory(PM). The TAP was manipulated with list type within study phase and association category type among PM target words. Associated word lists used for ongoing task were consisted of semantically associated lists and orthographically associated lists. Target words for PM task were consisted of city names or words for ending with the letter of '도'. According to the TAP view, PM performance would be better in the condition of task appropriate processing rather than in the condition of task inappropriate processing. Total fifty students volunteered for two experiments for the present study. The main finding was that PM performance was influenced by the task appropriate processing with ongoing task. In other words, PM performance was facilitated when association type between ongoing list and PM target word was same. Second, ongoing task performance was also influenced by task appropriated processing. These results were discussed in task appropriated processing theory and previous studies.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.96.1-96.1
• /
• 2007

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2003.05a
• /
• pp.48-51
• /
• 2003

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.987-991
• /
• 2011

In this paper, a health care system is implemented which can identify the parameter for moving body after exercising based on home network. This system has catched a signal for physical condition of body data using data acquisition mechanism such as a data acquisition module, a data signal processing module and a feedback module. The composition has a functions of displacement point for a BMI and WDI, that the basic parameter measure to base on the heart rate, temperature. There are checked physical condition of body exercising to compounded a physical condition of sensory organ. There are to keep the lookout for the body condition that to estimate a health care with a physical organ through a exercise.

• Transactions of Materials Processing
• /
• v.26 no.6
• /
• pp.348-355
• /
• 2017

In recent years, dissimilar materials such as aluminum, magnesium, titanium, and advanced high strength steel are widely used in automotive body due to environment concerns and fuel consumption. Therefore, joining technology is important for assembling components made of dissimilar materials. In this study, friction stir hole clinching (FSHC) was proposed as a new mechanical joining method to join dissimilar materials. This process stirs and heats the upper sheet, forming mechanical interlocking with the lower sheet. The feasibility of this FSHC process was verified by comparing cross-section of joint in FSHC and hole clinching process under the same processing condition. Taguchi method was also applied to the FSHC process to estimate the effect of process parameters on joint strength and obtain optimal combination of process parameters. Joint strength of FSHC with optimal process condition was compared to that of FSHC with initial process condition as well as that of hole clinching with optimal process condition. Results showed that the FSHC process was useful for joining dissimilar materials, even if the formability of materials was low.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.6
• /
• pp.44-49
• /
• 2003

The morphological analysis of wear debris can provide early a failure diagnosis in lubricated moving system. It can be effective to analyze operating conditions of oil-lubricated tribological system with shape characteristics of wear debris in a lubricant. But, in order to predict and recognize an operating condition of lubricated machine, it is needed to analyze and to identify shape characteristics of wear debris. Therefore, If the morphological characteristics of wear debris are recognized by computer image analysis using the neural network algorithm, it is possible to recognize operating condition of hydraulic driving members. In this study, wear debris in the lubricating oil are extracted by membrane filter (0.45$\mu\textrm{m}$), and the quantitative values of shape parameters of wear debris are calculated by the digital image processing. This shape parameters are studied and identified by the artificial neural network algorithm. The result of study could be applied to prediction and to recognition of the operating condition of hydraulic driving members in lubricated machine systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.513-517
• /
• 2005

The condition monitoring of rotating machinery such as turbines, pumps and compressors, determine what repairs are needed to avoid shutdown and disassembly of the machine in an industrial plant Many diagnosis methods have been developed for use when the machine is running at steady state, the stationary condition. But much information can be gained about a rotor's condition during non-stationary conditions such as run-up and run-down. Order tracking analysis is a powerful tool for analyzing the condition of a rotating machine when its speed changes over time. Powerful OTA using digital signal processing has some advantages(cheap hardware, the powerful methods, the accurate post processing) and also some disadvantages(calculation time, high speed sampling). New OTA tool based on the chirplet transform is similar to the short time Fourier transform. But, it has good resolution at high speed like other OTA methods based STFT and more resolution for constant frequency components than re-sampling OTA.