• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.222-229
• /
• 2016

Corni fructus is often distributed or processed in the form of dried fruit. However, Corni fructus is hard to develop due to its distinctive sour, bitter, and astringent taste. The aim of this study was to develop a puree to broaden the utilization of fresh Corni fructus. Manufacturing and quality characteristics of Sansuyu jam made from puree were investigated. Seeded Corni fructus pulp consisted of 20 to 26% whole fruit. The moisture and sugar contents of pulp were 52~63% and $15{\sim}31^{\circ}Brix$, respectively. Sterilized distilled water was added to seeded pulp to achieve a constant solids content in the puree. As the pectin content was low as $0.14{\pm}0.01%$, gelling agent was added to produce jam. The moisture content of the puree increased to 83~88%. The sugar content was reduced to $10^{\circ}Brix$. There was no significant difference in pH. DPPH radical scavenging activities of the puree according to ripening rate at a concentration of 100 ppm were 47.92% and 50.96%, respectively. The preference degree was $5.03{\pm}0.97$ at a ripening ratio of 50:50, 2% pectin, and 0.2% carrageenan. These results imply that Corni fructus pulp puree may be appropriate for development as a natural food product.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.528-537
• /
• 1999

The purpose of this study was to analyze and compare the bond strengths between stainless steel plate and zinc phosphate cement, polycarboxylate cement and glass ionomer cement, which are frequently used for cementation of stainless steel crowns. Three cementing materials were glued to the poles standing above stainless steel plate, bovine teeth, light cured glass ionomer restorative material and amalgam. And the tensile bond strengths between them were measured with universal testing machine and the results were statistically processed using ANOVA and Student t-test. The obtained results were as follows : 1. On stainless steel plate, glass ionomer cement and polycarboxylate cement showed higher tensile bond strengths compared to zinc phosphate cement, with no significant difference between the former two. 2. On the surface of bovine teeth and glass ionomer restorative material, glass ionomer cement showed highest bond strength, followed by polycarboxylate cement and zinc phosphate cement in order. 3. For amalgam restoration, polycarboxylate cement and glass ionomer cement showed higher tensile bond strengths than zinc phosphate cement, with no significant difference between the former two.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.16.1-16.9
• /
• 2016

Background: The association of biomaterial combined with repair factor-like platelet-rich plasma (PRP) has prospective values. Bovine-derived xenograft has been identified as an osteoconductive and biocompatible grafting material that provides osseointegration ability. PRP has become a valuable adjunctive agent to promote healing in a lot of dental and oral surgery procedures. However, there are controversies with respect to the regenerative capacity of PRP and the real benefits of its use in bone grafts. The purpose of this study was to assess the influence of PRP combined with xenograft for the repair of peri-implant bone defects. Methods: Twelve rabbits were used in this study, and the experimental surgery with implant installation was performed simultaneously. Autologous PRP was prepared before the surgical procedure. An intrabony defect (7.0 mm in diameter and 3.0 mm deep) was created in the tibia of each rabbit; then, 24 titanium dental implants (3.0 mm in diameter and 8.5 mm long) were inserted into these osteotomy sites. Thus, a standardized gap (4.0 mm) was established between the surrounding bony walls and the implant surface. The gaps were treated with either xenograft alone (control group) or xenograft combined with PRP (experimental group). After healing for 1, 2, 3, 4, 5, and 6 weeks, the rabbits were sacrificed with an overdose of KCl solution. Two rabbits were killed at each time, and the samples including dental implants and surrounding bone were collected and processed for histological analysis. Results: More newly formed bone and a better bone healing process were observed in control group. The histomorphometric analysis revealed that the mean percentage of bone-to-implant contact in the control group was significantly higher than that of the experimental group (25.23 vs. 8.16 %; P < 0.05, independent-simple t test, analysis of variance [ANOVA]). Conclusions: The results indicate that in the addition of PRP to bovine-derived xenograft in the repair of bone defects around the implant, PRP may delay peri-implant bone healing.

• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.497-504
• /
• 2000

To document that effects of hyperbaric oxygen(HBO) and ${\alpha}-tocopherol$ on full-thickness skin grafts in rat, we performed full-thickness skin grafts bilaterally on each rats. The HBO-treated rats were received HBO twice daily for 90 minutes at 2 ATA. Surgical control rats were not treated with HBO. ${\alpha}-tocopherol$ treated rats were received the agent via oral gastric tube daily for 3 days preoperative and a fourth dose 1 to 2 hours postoperative. HBO plus ${\alpha}-tocopherol$ treated rats were received HBO and ${\alpha}-tocopherol$ as mentioned above. Biopsy specimens were taken from each rat at the time of grafting and on days 2, 4, 7, 10, 14, 21, and 28, then were processed for tissue-concentration of total glutathione(GSHt), oxidized/reduced glutathione level, and thiobarbituric acid-reactive substance(TBARS) levels. The percentage of viable graft on day 10 ranged from 67 to 93%, and was not significantly different among the each other groups. The percentage of viable graft were, however, higher in HBO plus ${\alpha}-tocopherol$ treated rats(78.6%) than in HBO alone treated rats(59.1%), ${\alpha}-tocopherol$ alone treated rats(66.7%) and surgical control rats(58.2%). TBARS concentration had a significant increase from preoperative concentration at day 2, and peak concentration at day 4(p<0.01). Concentration then decreased to preoperative concentration at day 28. GSHt concentration of free skin graft had a similar patteren of change in four groups and decreased significantly from preoperative concentration at day 2, returning to preoperative concentration by day 7(surgical control, HBO-treated, and ${\alpha}-tocopherol-treated$, alone) and 28(HBO plus ${\alpha}-tocopherol-treated$). Percentage of the concentration of reduced glutathione decreased in surgical control, HBO-treated and, ${\alpha}-tocopherol-treated$(p<0.05), and HBO plus ${\alpha}-tocopherol-treared$(p<0.01) on day 7 after surgery, whereas the concentration of oxidized increased significantly in HBO-treated(p<0.05), ${\alpha}-tocopherol-treated$(p<0.05), and HBO plus ${\alpha}-tocopherol-treated$(p<0.01).

• Journal of Chest Surgery
• /
• v.46 no.1
• /
• pp.1-13
• /
• 2013

Background: Glutaraldehyde (GA) is a widely used cross-linking agent for improving mechanical properties and resistance to enzymatic degradation of collagenous tissue, but it has several drawbacks such as calcification and cytotoxicity. The aim of this study was to find the alternative effective cross-linking methods to GA. Materials and Methods: Bovine pericardium was processed with GA with ethanol+octanol and glycine detoxification, and polyethylene glycol (PG) space filler, dimethyl 3,3'-dithiobispropionimidate (DTBP), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) treatment, and the physical fixation of ultraviolet irradiation were done. The biologic material properties of variously treated pericardial tissues were assessed by biochemical, mechanical and histological tests. Treated pericardial tissues were also implanted subcutaneously or intramuscularly into the rabbit for 10 weeks to assess the xenoreactive antibody response of immunoglobulin G and M, their anti-calcification effect. Results: The biochemical and mechanical properties of EDC fixed pericardial tissues were comparable to the GA fixed tissue. The cytotoxicity was lowest in space filler treated GA fixed group. In rabbit subcutaneous or intramuscular implantation models, decellularization, space filler, EDC treatment group showed significantly lower calcium content than GA only and DTBP treatment group (p<0.05, analysis of variance). The titer of anti $Gal{\alpha}1-3Gal{\beta}1$-4GlcNAc-R antibodies did not change in the postimplantation serial enzyme-linked immunosorbent assay. Hematoxylin and eosin and von Kossa staining showed that decellularization, space filler, EDC, and ultraviolet treatment had less inflammatory cell infiltration and calcium deposits. Conclusion: The decellularization process, PG filler, and EDC treatments are good alternative cross-linking methods compared to GA only fixation and primary amine of DTBP treatment for cardiovascular xenograft preservation in terms of the collagen cross-linking stability and in vivo anti-calcification effects.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.5
• /
• pp.417-425
• /
• 2009

The potential utility of fish scales to the functional food industry has been investigated due to its antioxidant and antihypertensive characteristics. In this study, we report on the reactive oxygen species (ROS) scavenging and angiotensin I converting enzyme (ACE) inhibitory activities of gelatin hydrolysates processed from Branchiostegus japonicus scales, which are also high in protein content (about 46.1%). We prepared the enzymatic gelatin hydrolysates with four proteases (${\alpha}$-chymotrypsin, Alcalase, Neutrase and trypsin) from B. japonicus scale gelatin, which was prepared according to different reaction times, substrate/enzyme ratios and substrate concentrations. The enzymatic hydrolytic degrees of the gelatin increased time-dependently up to 6 hrs, while the Alcalase gelatin hydrolysates showed the highest hydrolysis degrees compared to the others. Furthermore, gelatin hydrolysates of Neutrase and ${\alpha}$-chymotrypsin showed the highest DPPH radical and $H_2O_2$ scavenging activities ($IC_{50}$ value; 9.18 mg/mL and 9.74 mg/mL), respectively. However, the activities were not significant (P<0.05). We also observed that the four gelatin hydrolysates significantly increased ACE inhibitory activities from approximately 20% to 60% (P<0.05), Among them, the Alcalase gelatin hydrolysates showed the higher ACE inhibitory activity ($IC_{50}$ value; 0.73 mg/mL) compared to the others. These results suggest that the enzymatic gelatin hydrolysates prepared from B. japonicus scales may possess a potentially useful function as an ACE inhibitory agent. As such, the utility of B. japonicus scales should be given due consideration for application in the functional food industry.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.341-350
• /
• 2001

Aluminum Hydroxide was employed as a thermal retardent and flame retardent for Chloropolyethylene (CPE) rubbery materials which is the construction material of automotive oil cooler hose. and then cure characteristics, physical properties, thermal resistance and flame retardation of compounded rubber were investigated, and optimum mixing conditions of rubber and flame retarding agent were deduced from the experimental results. CPE rubber material which has excellent properties of chemical corrosion resistance and cold resistance and inexpensive in price was used to prepare rubber specimen. The by-product of ething, produced from the process of surface treatment of aluminum was processed to aluminum hydroxide via crushing and purification, which is characterized by XRD, PSA, SEM and ICP-AES techniques in terms of phase, size, distribution, morphology and components of particles and then mixed to CPE rubber materials in the range of 0~80 phr. Hardness, tensile strength, elongation and thermal properties of compounded rubber specimens were tested. The optimum mixing ratio of rubber to additives to give maximum effect on thermal resistance and flame retardation, within the range of tolerable specification for rubber materials, was determined to be 40 phr. The flame retardation of CPE rubber materials was found to be increased by 5 times at this mixing ratio.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.

• Journal of Ginseng Research
• /
• v.41 no.2
• /
• pp.134-143
• /
• 2017

Background: The prevalence of allergic inflammatory diseases such as atopic dermatitis (AD), asthma, and allergic rhinitis worldwide has increased and complete recovery is difficult. Korean Red Ginseng, which is the heat-processed root of Panax ginseng Meyer, is widely and frequently used as a traditional medicine in East Asia. In this study, we investigated whether Korean Red Ginseng water extract (RGE) regulates the expression of proinflammatory cytokines and chemokines via the mitogen-activated protein kinases (MAPKs)/nuclear factor kappa B ($NF-{\kappa}B$) pathway in allergic inflammation. Methods: Compound 48/80-induced anaphylactic shock and 1-fluoro-2,4-dinitrobenzene (DNFB)-induced AD-like skin lesion mice models were used to investigate the antiallergic effects of RGE. Human keratinocytes (HaCaT cells) and human mast cells (HMC-1) were also used to clarify the effects of RGE on the expression of proinflammatory cytokines and chemokines. Results: Anaphylactic shock and DNFB-induced AD-like skin lesions were attenuated by RGE administration through reduction of serum immunoglobulin E (IgE) and interleukin (IL)-6 levels in mouse models. RGE also reduced the production of proinflammatory cytokines including $IL-1{\beta}$, IL-6, and IL-8, and expression of chemokines such as IL-8, thymus and activation-regulated chemokine (TARC), and macrophage-derived chemokine (MDC) in HaCaT cells. Additionally, RGE decreased the release of tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$), $IL-1{\beta}$, IL-6, and IL-8 as well as expressions of chemokines including macro-phage inflammatory protein $(MIP)-1{\alpha}$, $MIP-1{\beta}$, regulated on activation, normal T cell expressed and secreted (RANTES), monocyte chemoattractant protein (MCP)-1, and IL-8 in HMC-1 cells. Furthermore, our data demonstrated that these inhibitory effects occurred through blockage of the MAPK and $NF-{\kappa}B$ pathway. Conclusion: RGE may be a useful therapeutic agent for the treatment of allergic inflammatory diseases such as AD-like dermatitis.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.720-730
• /
• 1997

This study was performed to observe the histopathological response to the bonding resin directly applied on the remaining pulp tissues. 40 teeth from 3 adult dogs were pulpotomized with a sterile round bur and sharp excarvater. In the control group, $Ca(OH)_2$ powder was applied on the pulp tissue and the cavities were sealed with IRM cement. In the experimental group 1, Superbond C&B was applied on the remaining pulp and the cavities conditioned with 10-3 solution were filled with the mixture of the MMA liquid, PMMA powder and Catalyst. Multi-purpose adhesive was used on the remaining pulp tissue in the experimental group 2 and Z-100 was filled in the cavities. In the experimental group 3, Clearfil photobond applied and directly photo-cured on the pulp tissue, then the cavities were treated with CA agent (10% citric acid and 20% $CaCl_2$ aqueous solution) for 20 seconds, washed and applied with Clearfil photobond then filled with Protect liner. The experimental animals were sacrified at the 1st, 2nd, and 4th week. The specimens were routinely processed and stained with H-E for light microscopic observation. The results were as followed : 1. In the experimental group 1, the number and characteristics of the dentin bridge formation case was similar to those in the control group and less cases were observed in the experimental group 2 and 3 than experimental group 3. The inflammatory response in experimental group 1 was less than that in the control group at 1st week but there had been little difference at between 2nd and 4th week. 2. The number of the dentin bridge in experimental group 2 was less than that in control group and experimental group 1. The inflammatory response of the experimental group 1 was similar to that of experimental group 1 but less than that of the control group. A number of bleeding and vascular congestion were observed. The least inflammatory response was seen in the experimental group 2 among all groups. 3. In the experimental group 3, one case of the dentin bridge formation was observed and that was the same as that in the experimental group 2 but smaller than that of the control and experimental group 1. The inflammatory response of the experimental group 3 was least at the 1st week and most at the 4th week in the all group.