• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.27-41
• /
• 2007

Web offset newspaper prints is the most widely used printing process in domestic printing industry, but there are no industry-wide specifications for press control to assure consistent quality across newspaper printing plants. As newspaper printing becomes more of a commodity and less of an art, it is necessary to develop the print quality specification standard suitable for Korea web offset newspaper printing field. There are a few commonly employed printing standards such as, SNAP (Specification for Non-Heatset Publication) of the US, IFRA(INCA-FIEJ Research Association), J-color (Japan printing machinery association). And there exists KS for domestic standards, however, since it has been directly imported from ISO standards, there are discrepancies in printing materials and media. This paper aims to examine the color reproduction quality of domestic web offset newspaper prints by comparing with foreign standards. Printing experiments on this study have been performed at one of the domestic newspaper printing companies. The color reproduction properties of the web offset newspaper prints are measured by means of densitometry and colorimetry. These measures are evaluated comapratively with the international standards by means of analyzing, the major factors that determine the color reproduction quality of web offset newspaper prints.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.151-158
• /
• 2002

We developed a useful SQUID magnetometer for biomagnetic applications, magnetoencepha-logram(MEG) and magnetocardiogram(MCG), etc. The SQUIDs are based on Double Relaxation Oscillation SQUID(DROS). DROS consists of two SQUIDs(signal SQUID and reference SQUID) in series, and a relaxation circuit of an inductor and a resistor. Specially we used single reference junction instead of the reference SQUID. The SQUIDs are based on hysteretic $Nb/AlO_{x}$Nb junctions, fabricated by using a simple four level process. Because DROS magnetometer has large flux-to-voltage transfer coefficient, we can use simple flux-locked loop electronics fur SQUID operation. When the DROS magnetometer was operated inside a magnetically shielded room, its average magnetic field noise was about 3 (equation omitted) at 100 Hz. This noise level is low enough to measure biomagnetic fields. In this paper, we describe noise characteristics of DROS magnetometer, depending on the operation condition . .

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.190-200
• /
• 2017

In general, an assessment of the benefits and costs with regard to vehicle safety standards are validated before regulations are implemented. This paper performs this validation for the mandatory automobile safety devices requirement for new micro-mobility. The reviewed car safety standards involved the installation of seat belts, airbags, ABS, crash speed standards, and pedestrian warning system. The benefit was estimated as the cost of accident reduction due to the installation of vehicle safety standards. As a result, the safety belt showed a B / C of 4.0 or higher, and it was found that the seat belt should be installed from 2017. After the seatbelt regulation in 2017, the results of the scenarios with the airbag, ABS, crash speed of 40 km/h, and the pedestrian warning system showed B / C of 1.0 or more according to the year of regulation. This study can be useful as a tool in the decision-making process with regard to the timing and type of vehicle safety standards requirement of micro-mobility in the future.

• Journal of ILASS-Korea
• /
• v.20 no.4
• /
• pp.223-229
• /
• 2015

This paper was designed to investigate emission characteristics of regulated pollutants (CO, HC, NOx and PM) from 134 diesel and gasoline passenger cars based on emission standards according to fuel additives. The experiments using chassis dynamometer were conducted under NEDC and CVS-75 modes. Comparison for fuel additive management and test between Korea, USA, EU and Japan, Korea was more strict than others. The fuel additives of this study was satisfied within fuel manufacturing standards. For with/without fuel additives according to diesel emission standards, NOx of EURO 4 and EURO 5 showed a relatively similar tendency. In the case of PM reduction rate, EURO 5 was over 20% increased than EURO 4. In the case of standard deviation/average ratio for gasoline vehicles, variation interval was big for LEV 23.3~58% and ULEV 31.6~56.4%. Following the imposition of stricter regulations (EURO 5 and ULEV), difference rate for standard deviation was big. Especially, in the case of diesel vehicles, difference rate for NOx 68% and PM 48% was most big. The results of present study will be of assistance in completing the legislative process and will provide basic data to set up emission standards for fuel additives in Korea.

• Progress in Superconductivity
• /
• v.2 no.2
• /
• pp.71-75
• /
• 2001

The effect of annealing step-edges of LaAlO$_3$ and MgO single crystal substrates on YBa$_2$Cu$_3$O$_{7}$ junction has been studied. The step-edge was fabricated by argon ion milling and was annealed at 105$0^{\circ}C$ in 1 attn oxygen pressure. We compared AFM image near step-edge of the substrates between before and after annealing process. And YBa$_2$Cu$_3$O$_{7}$ thin film was deposited on the step-edge by a standard pulsed laser deposition. The step-edge junctions were characterized by current-voltage curves at 77 K. The annealing of step-edges of MgO substrate improved the current-voltage characteristic of Josephson junction: double steps in the current-voltage characteristic disappeared. However the annealing for LaAlO$_3$ did not improve the junction property.rty.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.6
• /
• pp.684-691
• /
• 2022

Hydrogen fuel cell electric vehicles are typically refueled at a wide range of temperatures (-40℃ to 85℃) in the hydrogen refueling station in accordance with the worldwide accepted standard. Currently, there is no traceable method by which to verify and calibrate the hydrogen flowmeters to be used at hydrogen refueling stations except for a water calibration process as a conventional method. KRISS hydrogen field test standard based on the gravimetric principle was developed to verify the measurement accuracy of the mass flowmeter to be used at hydrogen refueling stations for the first time in Korea.

• Journal of Magnetics
• /
• v.6 no.4
• /
• pp.142-144
• /
• 2001

A method to deduce the rotational magnetization curve from experimental magnetization of partially aligned uniaxial anisotropy system has been investigated. The curve obtained by this process has been evaluated quire close to the theoretical magnetization curve compared to that obtained by linear extrapolation from high field data. This new approach offers better accuracy for the determination of magnetic anisotropy by fitting a calculated magnetization curve to the obversed one.

• Proceedings of the CALSEC Conference
• /
• 1999.11a
• /
• pp.75-84
• /
• 1999

CALS is a strategy to share integrated product data through a set of standards to achieve efficiencies in business and operational mission areas. In this research, we first studied current status for CALS standard and then analyzed the case of US DoD. The results can be summarized as implementing for two major standard in defense CALS system. They are STEP and XML. Our recommendations can be used to set direction for CALS standard implementation and standard selection process.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.115-130
• /
• 1995

In order to produce Cu nanocrystallite in silicon wafer, the implantation technique was used. The samples of silicon (100) wafers were implanted by $Cu^+$ ions at 100 keV and with varying the doses at room temperature. Post-annealing was performed at $800^{\circ}C$ with Ar environment. To investigate the formation of Cu nanocrystallite with ion doses and growth process by thermal annealing, SIMS and HRTEM(high resolution transmission electron microscopy)spectra were studied.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.1
• /
• pp.83-90
• /
• 2008

The reinforcing steel process is composed of the development of placing drawing, cutting and bending, and the placement and fabrication of the reinforcement, and is participated in by reinforcement detailer, the fabricator and placer. Because the reinforcing steel process-from estimating and rebar detailing, to production, material tracking, billing, and general accounting-is conducted by many participant, reinforcement details based on building code and reinforcing bar detailing standards are essential. The process, however, holds some problems. Building code has been revised recently, and the utilization of placing drawings was proved to be low, and the reinforcement estimating in early stage of the process is below what is required for placement. Therefore, in this study, a survey was conducted to the reinforcement detailer, the fabricator and placer of domestic construction industry. According to the analysis of the survey, the reinforcement details on site was not standardized. The improvement in reinforcing steel detailing standards was sought by analyzing the results of the survey including reinforcement constructability.