• 한국문헌정보학회지
• /
• 제46권3호
• /
• pp.203-231
• /
• 2012

본 연구는 향후 국내 이동도서관 관련 기준 또는 지침을 제정하는데 필요한 이론적 기초를 마련하고자 1963년~2011년 사이에 제정된 외국의 이동도서관 관련 기준과 지침 11개에 대해 조사와 분석을 실시하였다. 분석 결과, 각 기준과 지침마다 개별적인 차이가 있었으나 대체로 관리/운영, 차량, 인력, 장서, 방문일정/정류장, 서비스/프로그램, 마케팅/홍보, 정보통신기술, 안전 등의 9개 항목들이 이동도서관 기준과 지침의 주요 항목으로 나타났고, 주요 항목마다 다양한 세부항목들이 존재하였다. 이러한 분석결과를 토대로 향후 국내 이동도서관 기준 또는 지침 제정과정에 도움을 줄 수 있는 몇 가지 사항들이 제언되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권4호
• /
• pp.62-66
• /
• 2020

We fabricated superconducting quantum interference devices (SQUIDs) based on Nb Josephson junctions, and characterized the key parameters of the SQUIDs. The SQUIDs are double relaxation oscillation SQUIDs (DROSs) having larger flux-to-voltage transfer coefficient than the standard DC-SQUIDs. SQUID sensors were fabricated by using Nb junction technology consisted of a DC magnetron sputtering and a conventional photolithography process. In multichannel SQUID systems for whole-head magnetoencephalography measurement with a helmet-type SQUID array, we need about 336 SQUID sensors for each system. In this paper, we fabricated a few hundred SQUID sensors, measured the critical current, flux modulation voltage and decided if each tested SQUID can be used for the multichannel systems. As the criterion for the acceptance of the sensors, we chose the critical current and amplitude of the modulation voltage to be 8 ㎂ and 80 ㎶, respectively. The average critical current of the SQUIDs was 10.58 ㎂. The typical flux noise of the SQUIDs with input coil shorted was 2 μΦ0/√Hz at white region.

• 산업경영시스템학회지
• /
• 제45권1호
• /
• pp.53-70
• /
• 2022

Recently, due to the change to SASB(Sustainability Accounting Standards Board) and GRI(Global Reporting Initiative) Standards 2021, the paradigm for non-financial information disclosure is changing significantly, with the number of ESG topics and indicators that must be disclosed by industry from an autonomous material topic selection method. This study revealed that the number of compulsory topics in the oil and gas industry by GRI standards 2021 is up to 2.4 times higher than the average number of material topics disclosed when domestic companies publish sustainability reports using GRI Standards 2020. In the oil and gas industry, I analyzed the similarities and differences between the GRI standards 2021 and the ESG topics covered by SASB by environmental, social, economic, and governance areas. In addition, the materiality test process, which is different in GRI standards 2021, is introduced, and the issues included in the following 10 representative ESG-related initiatives are summarized into 62 and suggested improvement plans for materiality test used in the topic pool.

• 산학경영연구
• /
• 제22권1호
• /
• pp.27-44
• /
• 2009

This paper compares the accounting standards for stock option of Japan and Korea. Especially, tire setting process of accounting standards for stock option, accounting methods and disclosures for stock option in two countries are analyzed. The results provide that two countries shaw different characteristics in accounting standards for stock option. First, in Japan, acquired services are reported as compensation costs and capital adjustments. On the other hand, in Korea, in case of cash-settled share- based payment transactions, acquired services are reported as compensation costs and capital adjustments, but in case of equity-settled share- based payment transactions, acquired services are reported as compensation costs and debt. Second, when tire stock option rights are abandoned, they are reported as extraordinary items in Japan and are reported as other surplus in Korea. Third, though both countries do not choose specific stock option pricing model, Japan prefers Black-Sholes Model and Korea regards binomial model as proper model.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.180-180
• /
• 2012

A microplasma system source based on microwave parallel stripline resonator (MPSR) was developed for the generation of microplasmas in a wide range of pressure from some torr to 760 torr. This source was operated at its resonance frequency that much depends upon not only its discharge gap size but also operated pressure. This paper applied a simple circuit model to analyze the effects of discharge gap size and pressure to resonance frequency and impedance of MPSR in the cases with and without plasma exist inside the discharge gap. In the process of calculating, the conformal mapping method was used to estimate the capacitance of the MPSR. The calculating results by using circuit model agree well with the simulation results that using commercial CST microwave studio software.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.590-590
• /
• 2013

Direct growth of graphene using CVD method has been done on CVD grown boron nitride substrate. From the SEM image, we have shown that the size of grain of graphene could be clearly controlled by varying the amount of injected hydrocarbon. To convince the existence of graphene on boron nitride, XPS and Raman has been checked. Both B1s and N1s peaks in XPS spectra and the Raman peak around 1,370 $cm^{-1}$ demonstrated that boron nitride did remain after high temperature treatment during the graphene growth process. And along the graphene grain boundary, the Raman fingerprint of graphene was neatly appeared.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.27-34
• /
• 2015

If examining utilization by completion of National Competency Standards development, efforts are made so as to organize curriculum matched to education or training and perform subjects based on competence unit educationally in specialized high schools, colleges and university. However, National Competency Standards is insignificantly utilized in enterprises and on the spot due to characteristics of occupation type and diversity of process. This thesis intended to measures of safety efficiency improvement of final enterprise through the human resources assessment system of National Competency Standards based enterprise. Therefore, various methodologies were introduced and results of analysis by Balanced ScoreCard method were suggested for policy measures improving final safety efficiency. The results of this analysis are expected to make contribution to improving the effectiveness of the government's industrial safety and health policies through the establishment of systematic safety and health systems according to the risk level of individual business.

• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.110-119
• /
• 2020

화재안전기준은 소방시설법 시행령 별표1에서 규정하고 있는 소방시설에 대한 설치방법 및 기술적 기준을 규정한 것으로 공공의 안전확보와 화재예방을 위한 근간으로서 그 역할을 수행하여왔다. 그러나 현행의 화재안전기준은 성능 기준과 기술기준이 혼재되어있는 형태로 장기간의 개정 절차와 제도적인 경직성으로 인해 기준의 제·개정이 신속하게 진행되기 어렵다. 또한, 기준을 제·개정하고 유지관리 할 수 있는 전문적 상임 독립기구의 부재로 인해 전문성 유지에 한계가 있으며 그 외에도 총의(總意)성, 공개성, 일관성이 결여되는 문제가 있다. 따라서, 이러한 문제점을 극복하기 위해 본 연구에서는 화재안전기준의 변천 및 운영 현황, 법적 성질 및 법적 현황 그리고 제·개정 시의 문제점을 살펴보고 국내·외 유사 기술기준의 운영사례를 비교 분석하여 화재안전기준의 제·개정 시스템을 개선하고자 하였다. 이것을 나타내면 다음과 같다. 첫째, (현(現))국가화재안전기준을 법적 성능 기준과 기술적 세부기준인 기술기준으로 분류한다. 둘째, 기술기준의 제·개정 주체를 기존의 국가에서 민간으로 이양시킨다. 셋째, 기술기준을 사용자 중심의 코드 시스템으로 정비하는 것이다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제19권2호
• /
• pp.19-30
• /
• 2013

Purpose: The planning and design of hospital generally requires the participation and consultation of skilled experts since it has more complex space program than any other buildings. Therefore, the BIM systems for the planning of hospital have been tried continuously. The purpose of this study is to identify the precondition for space Program validation of healthcare architecture based on BIM, which is recently receiving wide attention. Method: For this study, United States, Australia and Finland's guidelines were analyzed among the description space program validation system in 14 overseas BIM Guidelines. And the propose precondition that can be applied to healthcare architecture from among these description of space program validation items, target, process etc for General building. Result: 1) spatial program validation is the following four evaluation phase. Step 1: Standard setting phase Step 2: BIM model accuracy assessment phase Step 3: space validation phase Step 4: Performance evaluation phase 2) The standards for the building elements at Standards Setting stage is considered to the standards for the architectural elements of General building. 3) Healthcare Architecture Area calculation method is considered to be reasonable that borrowing the area calculation standard of general architecture according to the UIA of international standards. However, Be proposed of measuring method that reflect the efficiency of the design process step-by-step area calculation method. The performance assessment indicators of reflect the Hospital uniqueness have to developed. And the research needs to be carried out continuously according to the purpose for healthcare architecture of feature-oriented. Implications: In this paper like to understanding that precondition of space program validation considering the BIM. As a result, understanding to condition about step of the evaluation, the evaluation standards. Is expected to keep the focus on the development of performance indicators that reflect the uniqueness of the hospital for the efficient evaluation of the Hospital building.

• Journal of Nutrition and Health
• /
• 제49권3호
• /
• pp.201-212
• /
• 2016

Purpose: Needs for reevaluation of food code standards and regulations for cooked foods produced in restaurants and institutional foodservice to minimize risk factors leading to foodborne outbreaks are on the rise. The purpose of the study was to propose updated standards for cooked foods of restaurants by testing whether or not experts agree to include them as a standard. Methods: Qualitative and quantitative research methods were applied via a survey by email and workshop hold for experts panel discussions. Results: Seven newly proposed standards were selected as follows: (1) sanitizing vegetables and fruits with no heating process after washing, (2) rapid cooling of cooked foods after heating process, (3) monitoring cooking temperatures, (4) minimum 2 hours holding after cooking for temperature control of safety (TCS) foods without temperature control, (5) banning practices for workers such as bare hands handling of ready-to-eat foods, (6) maintaining cleanliness of food contact surfaces for disposable products, and (7) cold holding standards for sushi. Conclusion: The proposed proposal can be utilized as control measures for preventing foodborne illness in restaurants. However, a feasibility study should be conducted to test whether they are applicable to the field of restaurant operation.