• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.509-517
• /
• 2011

Recently, large scale of the damage from the natural disasters are occurring frequently such as Japanese and New Zealand's earthquake. Collecting information quickly and accurately from damaged area is important for effective react in emergency situations. UAV is effective method to collect information because it can fly low attitude and spend small operational costs/time. In this study, collecting data about the UAV regulations are analyzed for effective UAV operation in disaster detection. And Improvement of Regulations were proposed about Problem of UAV Operation. Regulation of UAV for disaster detecting is not exist. But It's possible to classify into Ultra Light Plane. So addition of some clauses like definition, scope and air-borne equipment for UAV will be needed. Also, it is difficult to manage effectively because of process about flight permission, therefore it is need to enact exceptional regulations to solve this problem. More analytical research based on applications of UAV operation for disaster detection will be present improvement of disaster detection and damage investigation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.131-132
• /
• 2009

The container terminal can be divided into berth-side, yard area and gate. Until now, many studies related to the improvement of the terminal operation efficiency have been focused on berth and yard productivity. With regard to gate operation, existing studies were examined from hardware perspectives such as non-stop system using RFID(Radio Frequency Identification) or OCR(Optical Character Reader). Relatively little research has been curried out on the improvement of the gate in/out process. In this regard, this paper proposes the method to improve the terminal operation efficiency.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.130-138
• /
• 2020

As of 2017, the sewerage penetration rate of Seoul and metropolitan cities is more than 90%, and the number of domestic sewage treatment plants increased by 25% from 3,064 in 2010 to 4,072 in 2017. Among them, sewage treatment plant operated by SBR system is 585, which is 17% higher than 2010. In order to improve the water quality of the water source and improve the operation of the small sewage facilities, the improvement of the process was studied by applying the modelling to 49 facilities of the sewage treatment plant in Andong Imha dam area with more than 500㎥/day 3 places and 46 places less than 500㎥/day. As an improvement plan for modelling, candidate data were derived by reviewing operation data for 5 years. 49 facilities are operated by 12 types of operating processes. Among them, 1 place mort than 500㎥/day with SBR method and 9 facilities with less than 500㎥/day were selected by dividing 46 sites into 3 types. As a result of applying modelling to more than 500㎥/day, it was possible to improve the quality of discharged water through SRT control and it was found that applying model to sites of small scale treatment plants can improve the removal efficiency of TP by up to 14.4%. As a result, the data of this study could be used to improve and improve the operation of sewage treatment plants and RCSTP(Rural Community Sewage Tratment Plant).

• Quality Improvement in Health Care
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2018

Objectives: The post-accreditation management system should be systematic in order to ensure that the accredited hospital continues to strive for patient safety and quality improvement during the accreditation period. In this study, we compare the post-accreditation management system in four countries (the U.S., Australia, Japan, and Korea) and provide suggestions for improving the post-accreditation management system in Korea. Results: All four countries had the post-accreditation management system, and the basic structure of the system in Korea was similar to that of others. However, there were differences in the practical operation processes and the use of the results. In the operation process, Korea's monitoring relies on voluntary reporting by accredited hospitals. In terms of results utilization, analytical feedback to data submitted by the acrredited hospital is not provided in Korea. Conclusions: It is necessary to establish a continuous monitoring system for post-accreditation changes and provide feedback to accredited hospitals. It is also necessary to perform a survey without advance notice and establish a firm legal basis for monitoring.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.279-286
• /
• 2017

In this paper, an optimal approach for the wide-area regulation of control devices in a transmission network is proposed. In order to realize an improved voltage profile and reduced power loss, existing devices such as tap-changing transformers, synchronous machines, and capacitor banks should be controlled in a coordinated and on-line manner. It is well-understood that phasor measurement units in transmission substations allow the system operators to access the on-line loading and operation status of the network. Accordingly, this study proposes efficient software applications that can be employed in area operation centers. Thus, the implanted control devices can be regulated in an on-line and wide-area coordinated approach. In this process, efficient objective functions are devised for both voltage profile improvement and power loss reduction. Subsequently, sensitivity analysis is carried out to determine the best weighting factors for these objectives. Extensive numerical studies are conducted on an IEEE 14-bus test system and a real-world system named the Azarbayjan Regional Transmission Network. The obtained results are discussed in detail to highlight the promising improvements.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.467-478
• /
• 2019

Purpose: The purpose of this paper is to improve quality for water infiltration to FCISA during military aircraft operation. Methods: A series of troubleshooting studies were conducted to identify the root cause of the water infiltration and reproduce the defects through various simulation tests. And design improvement measures were derived, and countermeasures were taken to prevent recurrence of moisture inflow defects. Conclusion: FCISA operates a very important role in the operation of military aircraft, and defects due to water infiltration are very fatal to flight safety. In this study, the root cause was identified and the design improvement to prevent recurrence was carried out through the failure investigation performed in this study, and the FCISA was improved so that the flight safety was not affected. The results of this study will be valuable back data that can be reflected in the design process through Lessons-Learned in the design phase of the aircraft that will be developed in the future.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.246-246
• /
• 2001

The conventional and new forming processes of a steel shell body are analyzed by the rigid-plastic finite element method. The conventional process contains five forming stages such as bending, drawing, ironing, heading and sizing, which was designed by a forming equipment expert. The results of simulation of the conventional forming process are summarized in terms of deformation patterns and load-stroke relationships for each forming operation. Based on the simulation results of the current five-stage, the shell body forming Process including backward extrusion is designed for improving the conventional process sequence. Forming loads of the proposed process are within the limit value, which is proposed by experts and the proposed process is found to be proper for manufacturing steel shell body.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.245-252
• /
• 2001

The conventional and new forming processes of a steel shell body are analyzed by the rigid-plastic finite element method. The conventional process contains five forming stages such as bending, drawing, ironing, heading and sizing, which was designed by a forming equipment expert. The results of simulation of the conventional forming process are summarized in terms of deformation patterns and load-stroke relationships for each forming operation. Based on the simulation results of the current five-stage, the shell body forming Process including backward extrusion is designed for improving the conventional process sequence. Forming loads of the proposed process are within the limit value, which is proposed by experts and the proposed process is found to be proper for manufacturing steel shell body.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.22-46
• /
• 2002

Recently, increasing attention has been paid to building the software quality and software productivity due to ongoing software crisis. To overcome such problem, one of the many alternatives is to use the capability maturity model (CMM) suggested by the Software Engineering Institute(SEI), focusing on the improvement of software progress. This research is proposed the theoretical framework for CMM based on the previous studies, and review the status of software process on the software development organization. We then examine the impact of the software process capability on the organizational performance including financial measures and non-financial measures. Hypotheses on software process capability were tested 144 organizational units. The 62.5% of foreign companies are distribute to the second and third level, the Korean firms in this study are indicated the first level. Result indicate that maturity of software process may be served the key predictor of organizational performance, in particular the positive relationship between the software process and non-financial performance index such as customer service, IT Infrastructure, marketing, supplier and purchaser, production and operation.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.269-288
• /
• 2009

After enterprise get a certification in acquisition, the core requirements of ISO/TS 16949 standard is pull out the Performance Indicators by process access approach during the settlement and operation of system, and the pulled key performance indicators classified into the customer intention process, support process and management process and analyzed the effect to the management result. This study conducted with following step. Firstly, preceding research, the literature and investigation analysis about process approach method which is the special characteristics of ISO/TS 16949 standard. Secondly, each process of ISO/TS 16949 standard is classified and deduced the key performance indicators followed process access method. Finally, get a enterprise survey data related to improvement of Performance Indicator and analyzed by SPSS statistical software.