• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.39.3-39
• /
• 2001

Since Kalman filter and wavelet transform techniques are both suitable for a nonstationary process, wavelet-Kalman filter was proposed and applied to various industrial fields. However, the wavelet-Kalman filter subjected to model uncertainty with nonstationary process has not been considered. Thus, the robust wavelet-Kalman filter method is proposed in this paper. The proposed method can prevent the degradation of filter performance when parameter uncertainty exists in both the state and measurement matrices and preserve the merits of the standard Kalman filter in the sense that it produces optimal estimates. A simple example shows that the proposed approach outperforms the standard Kalman filter and the nominal wavelet-Kalman filter.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.8
• /
• pp.144-152
• /
• 2003

The purpose of this paper is to establish an effective inspection system by using OMM (On-Machine Measurement) system based PC-NC. This system can reduce manufacturing lead time because part is inspected each process. Inspection process planning is accomplished by determining the number of measuring points, their location, measuring path using fuzzy logic, Hammersley method, traveling salesperson problem. Inspection with contacted sensor improve quality as inspection feature is developed to based machining feature. This method is tested by simulation and experiment, then analyzed measuring data and geometry tolerance.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2375-2378
• /
• 2003

In manufacture of printed circuit boards, one important issue is precisely to measure the three-dimensional shape of the solder paste silk-screened prior to direct surface mounting of chips. This paper presents the 3D shape reconstruction of solder paste using the optical triangulation method based on structured light or slit beam and the measurement algorithm for height, volume. area, and coplanarity on component pads from the 3D range image. Futhermore, statistical process control function is incorporated for process capability analysis.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.509-517
• /
• 2010

The paper proposes the misuse types of statistical quality tools according to the kind of data and the number of population in DMAIC process of six sigma. The result presented in this paper can be extended to the QC story 15 steps of QC circle. The study also provides the improvement methods about control chart, measurement system analysis, statistical difference, and practical equivalence.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.141-147
• /
• 1989

Using monochrome CCD camera with high speed electronic shutter. blade image is captured in the environment with vibration. The image is preprocessed using LoG filter and zero crossing. We used Hough transformation method to detect straight lines and obtained width between lines caused by grinders. This paper proposes automatic blade measuring method to automate the process control of blade grinding.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.247-251
• /
• 1998

From the early 90's TPM(Total Productive Maintenance) plays important roles to improve productivity and quality to keep enterprise's competivity. This study presents the results of an enquiry for the maintenance management of Korean industry in 1996. The response rate was 35.8% (43 companies) that the corporations were divided into four industrial groups, heavy process, light process, heavy assembly and light assembly. 40 question were asked, including maintenance organization, maintenance personnel, maintenance cost, measurement of maintenance performance and improvements achieved. This paper compares the results with those of an earlier Japanese and British enquiry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.714-723
• /
• 2000

The purpose of this study is to develop functional and sensible brassiere for middle-aged women. As a methodology, engineering design process, especially, QFD(Quality Function Deployment) was adopted to translate consumer's needs into product design parameters. Wearing tests of commercial brassiere were performed for the development o subjective measurement scale. The environmental condition was controlled at 28$\pm$1$^{\circ}C$, 65$\pm$3%RH. As results, subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. Regression equations with the subjective evaluation descriptors were developed for the prediction of wearing comfort of brassiere. (R2=.82) The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.376-380
• /
• 2009

Surface acoustic wave (SAW) device is widely used as a bandpass filter, a chemical or physical sensor, and an actuator. In this paper, we propose the capacitive gap measurement system with high precision through the signal processing using SAW device. The research process is mainly composed of theoretical part and experimental part. In theoretical part, equivalent circuit model was used to simulate the SAW response by the change of capacitance. In experimental part, commercialized capacitor was used to see the SAW response by the change of load capacitance. After that, gap adjustment system was made physically and the SAW response by the change of gap which caused the capacitance change was measured. And resolution and stroke was decided comparing the signal change and basic measurement noise level.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.157-172
• /
• 2004

The results of this study has been split into two components, On set of results addressed the strategy of developing a Agility for maintenance consumer. The other set of results addressed the strategy of illuminating the successful measurement and concepts formed during the maintenance problem solving process, especially in the context of the Logistics Information system by aggregation information space. This paper presented a classifiable elements of Agility & Measurement of logistics capability in the Korea market. These concepts are positioned in a framework to give a better understanding what the consequences are of the changing business environment. The developments towards more globalization which leads to centralization and mass individualization that has a tendency to go more in the decentralized solutions, seems to be in contradiction. we will focus a proposal of Logistics information system and demand management decisions that should be a prime concern of any profit maximizing firm, unready strategy of investment. and we will prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influnce for a cause and effect basically.[5]

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.5
• /
• pp.437-443
• /
• 2010

SAW device is widely used as band pass filters, chemical or physical sensors, and actuators. In this paper, we propose the capacitive gap measurement system with high precision using SAW device. The research process is mainly composed of theoretical and experimental part. In the theoretical part, equivalent circuit model was used to predict the SAW response by the change of load impedance. In the experimental part, commercialized capacitor was used to see the SAW response by the change of load capacitance to check the feasibility as a sensor unit. After that, experimental setup to measure and adjust the gap was made and the SAW response by the change of gap which caused the capacitance change was measured. Finally, resolution and stroke was decided compared with the signal change and basic measurement noise level.