• Korean Institute of Interior Design Journal
• /
• no.3
• /
• pp.33-37
• /
• 1994

Increasing interest and providing educational experience for the public have long been a major ARt Museum goal. This interest raises the question of how visitors respond to museum exhibits. Much researches have been done which indicate the newer and more interactive exhibits are indeed more didactic and enjoyable than conventional exhibits. This study examined the effectiveness of art exhibits which display information about the creative process of developing a work art along with the final work of art to test if they results in more viewer interest and greater appreciation of the final work of art than those which display only the final work of art. In the early part of the 1991 spring, a counterblancing AB/BA quasi-experiment was carried out in the Jhnson Museum of Art, Cornell University. Methods used to collect and measure visitory interest and appreciation were unobtrusive observation and survey questionnaire. As the indirect measurement of visitor interest, attracting power and holding power were measured by unobstrusive observation of visitor time spent, while the direct measurement of visitor interest and appreciation, visitor's interest, understanding , and degree of favorableness were measured by survey questinnaire. Data analysis reached conclusion that the process approach fine art exhibit designs significantly resulted in more viewer interest and greater appreciation of art work than the conventional fine art exhibit design.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.183-188
• /
• 1998

A quartz crystal analyzer is utilized to monitor the cmsion process of an aluminum surface of a quartz crystal by sea water. A quartz crystal having 2000${\AA}$ of aluminum layer is installed in a spedally designed cell and is in contact with an electrolyte solution. While a constant potential is applied to the cell, the resonant frequency and resonant resistance are simultaneously measured using the quartz crystal analyzer. In addition, surface topographs are taken with an atomic force microscope(AFM) and the element analysis of the surface is conducted using an energy dispersive X-ray spectrornetedEDX). The simultaneous measurement of resonant frequency and resonant resistance during the corrosion process explains the change of surface structure caused by the corrosion. The variation of resonant frequency addresses the amount surface metal dissolution. As a conclusion, it is found that a simple measurement using the quartz crystal analyzer can replace the complex monitoring employing large equipments in the investigation of a corrosion process of metal surface.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.66-72
• /
• 2010

Recently, the use of means of transportation of the lightweight aluminum to temper the trend is increasing. More efficient use of lightweight aluminum material to Friction stir welding has been widely attempted. Types of welding tools at the right screw to rotate anti-clockwise direction, when the tensile stress exerted on the location of the top plate to the left in the direction of the welding process to the installation was able to obtain high tensile strength. A5052 to the top of the left in the direction of the welding process to install and, when you installed the right under the A6061 was not easily come up to the top of the A5052. Conversely, at the bottom left to install on top of the A6061 and A5052 have been installed at the bottom of the upper area of the A6061 and A5052 intrude easily form the shape of the hill you can see that it was formed.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3
• /
• pp.143-167
• /
• 2013

The main propose of this research is to examine the performances in ERP introduced enterprises by utilizing BSC model proposed by Kaplan and Norton [1992], to realize this goals, a theoretical review on ERP, BSC, and other related issues is performed in advance, accordingly, research model was generated. In conceptual model analysis, we focused on casual relationships among four performance measurement indicators after introduction of ERP proposed by Kaplan and Norton [2000]. To test the model, structural equation modeling is employed to analyze data collected from 164 enterprises which have introduced ERP for more than 1 year. Survey respondents were confined within the representatives of each enterprise's ERP. Hypotheses proposed in our research are tested by covariance structure model, results are listed as follow : First, learning and growth performance is significant factors for improving both internal process performance and customer performance; second, process performance has a positive impact on customer performance third, despite that customer performance is positively related to financial performance, no direct relationship is found between internal process performance and financial performance, an indirect relationship is built through intermediate medium of customer performance. Based upon these results, we discuss implications at the latter part of paper. Meanwhile, we also provide research limitations, and future research in the final section.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.1
• /
• pp.45-53
• /
• 1998

Video monitoring techniques and their applications to beaches were reviewed. The recent development of video hardware and image process made it possible to measure shoreline changes, sandbar morphology, wave runup, swash motion, and so on using video camaras. Especially, quantitative information from the video image can be obtained by digitization of image, rectification procedure, and image process. Using video monitoring techniques, measurements can be made at much lower cost and for long periods of time compared to the traditional measurement techniques, although these techniques are of lower accuracy and provide only indirect information on the land and water surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.231-234
• /
• 2004

Chemical mechanical polishing(CMP) process was studied in terms of tribology in this paper. CMP performed by the down force and the relative motion of pad and wafer with the slurry is typically tribological system composed of friction, wear and lubrication. The piezoelectric quartz sensor for friction force measurement was installed and the friction force was detected during CMP process. Various coefficient of friction was attained and analyzed with the kind of pad, abrasive and the abrasive concentration. The lubrication regime is also classified with ${\eta}v/p(\eta,\;v\;and\;p;$ the viscosity, relative velocity and pressure). Especially, the co-relation not only between the friction force and the removal per unit distance but also between the coefficient of friction and within-wafer-nonuniformity was estimated.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.59-60
• /
• 2016

Flooded lead acid batteries are still very popular in the industry because of their low cost as compared to their counterparts. State of Charge (SOC) estimation is of great importance for a flooded lead acid battery to ensure its safe working and to prevent it from over-charging or over-discharging. Different types of Kalman Filters are widely used for SOC estimation of batteries. The values of process and measurement noise covariance of a filter are usually calculated by trial and error method and taken as constant throughout the estimation process. While in practical cases, these values can vary as well depending upon the dynamics of the system. Therefore an Adaptive Unscented Kalman Filter (AUKF) is introduced in which the values of the process and measurement noise covariance are updated in each iteration based on the residual system error. A comparison of traditional and Adaptive Unscented Kalman Filter is presented in the paper. The results show that SOC estimation error by the proposed method is further reduced by 3 % as compared to traditional Unscented Kalman Filter.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.16-19
• /
• 2018

The development speed of semiconductor and display device manufacturing technology is growing faster than the development speed of process equipment. So, there is a growing need for process diagnostic technology that can measure process conditions in real time and directly. In this study, a plasma diagnosis was carried out using impedance variation due to the plasma discharge. Variation of the measurement impedance appears as a voltage change at the reference impedance, and the plasma density is calculated using this. The above experiment was conducted by integrating the plasma diagnosis system and the linear atmospheric pressure DBD plasma source. It was confirmed that plasma density varies depending on various parameters (gas flow rate, $Ar/O_2$ mixture ratio, Input power).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.1
• /
• pp.21-26
• /
• 2021

Single-layer graphene is grown directly on Ti-buffered SiO2 at 100℃. As a result of the AFM measurement of the Ti buffer layer, the roughness of approximately 0.2 nm has been improved. Moreover, the Raman measurement of graphene grown on it shows that the D/G intensity ratio is extremely small, approximately 0.01, and there are no defects. In addition, the 2D/G intensity ratio had a value of approximately 2.1 for single-layer graphene. The sheet resistance is also 89 Ω/□, demonstrating excellent characteristics. The problem was solved by using graphene and a lift-off patterning method. Low-temperature direct-grown graphene does not deteriorate after the patterning process and can be used for device and micro-patterning research.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.91-96
• /
• 2022

Article materials reflect the results of scientific research and generalization of experience concerning quality measurement of student's educational activities in the context of innovative development of the educational process, which is ensured by introducing educational innovations. The main point of monitoring of higher education students' activities and also phenomenon of education quality, particularly its results, are determined in the research. Guided by the scientific theory and personal experience of scientific and pedagogical activities, the attempt to single out the key components, important indicators and to introduce component indicator model of quality of higher education students' activities on the qualimetry base has been performed. Methodical solutions concerning the application of the developed model to determine the dynamics of pedagogical students' educational achievements by particular educational components in the process of innovative development of educational process are proposed. The advanced studies that relate to the development of methods for monitoring the quality of pedagogical higher education students' activities on the basis of systemic, competence and qualimetry approaches taking into account the levels of education and chosen specialties have been decided.