• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.63-68
• /
• 2010

The Color Management System in recent printers adopts ICC profiles for both monitors and printers. However, the ICC profile doesn't contain the characteristics of reproduced color on each monitor, because the color on each monitor is changed by user adjustment such as color temperature, brightness, and contrast adjustment. It is also depended on the backlight type and lifetime. As a result, unwanted color is reproduced on the printed paper, not like that on the monitor. To overcome the color difference between monitors and printers, it is needed to control the information of ICC profile. That is, first, the ICC profile is generated by the measurement of monitors having user set, then, through the CMS, the color on monitors can be produced on printed paper. However, it is difficult to apply the above system for normal users due to absence of measuring equipment and time consuming process. Therefore, this paper proposes a novel color matching technique based on the estimation of condition for each monitor having user set. The estimation is performed by a simple comparison visual test using a test image on printed paper and monitor. Then, the condition of monitor is applied to the ICC profile. As a result, the new ICC profile contains the color difference between user monitor and printer. The experimental results show the printed images using our proposed method have almost similar color with those on monitors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2010

It is necessary to determine accurate 3-dimensional coordinates of the building corner points that could be control or check points in order to verify the accuracy of 3D digital maps in the near future. The usual process of obtaining the coordinates of the building corner points is to set up the ground control points with a GPS and then to practice terrestrial survey such as distance or angle measurements. However, since an error in the ground control points can be propagated through the terrestrial survey into the final coordinates of the buildings, accurately should be considered as much as possible. The actual effect of the GPS-derived ground control point error on the estimates of the unknowns through the terrestrial survey is mathematically analyzed, and the simulation data is tested numerically. The error of the ground control points is tested in the cases of 1-4 cm for the horizontal components and 2-8 cm for the vertical component. The vertical component error is assigned twice the horizontal ones because of the characteristics of the GPS survey. The distance measurement is assumed for convenience and the precision of the estimated coordinates of the building corner points is almost linearly increased according to the errors of the ground control points. In addition, the final estimates themselves can vary by the simulated random errors depending on the precision of the survey instrument, but the precision of the estimates is almost independent of survey accuracy.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.231-235
• /
• 2011

Radium is rock or soil of crust or uranium of building materials and thorium after radioactivity collapse process are created colorless and odorless inert gas that accrue well in sealed space like mine or basement. It inflow to lung circulate respiratory organ and caused lung cancer because of deposition of lung or bronchial tubes. Radium sheath of medical institution treat person's life is possible big danger to professional regarding radioactivity who has much amount exposed radioactivity and weaker immune patient. so we do this test. Using measuring instrument at test is real time radium measuring instrument, Professional Continuous Radon monitor, and measuring places are basement first floor and second floor of two hospitals and measure from 10 a.m to 3 p.m. Measurement result of Professional Continuous Radon monitor is minimum 14.8 Bq/$m^3$ to maximum 70.3 Bq/$m^3$ and show domestic baseline below 148 Bq/$m^3$, effective dose-rate is minimum 0.296 mSv to maximum 1.406 mSv that show 2.4 mSv, 10~58.3% level, exposed radiation amount from nature radiation one year.

• Journal of Biomedical Engineering Research
• /
• v.33 no.2
• /
• pp.72-77
• /
• 2012

Phase Contrast MR Angiography(PC MRA) is excellent MRA technique for measuring the velocity of vessels in the human body. PC MRA need to at least four images for angiogram reconstruction and it caused longer scan time. Therefore, we used keyhole imaging combined PC MRA to reduce the scan time. However, keyhole imaging can lead the erroneous effects as loss of phase information or frequency discontinuous. In this study, we applied the keyhole imaging combined 2D PC MRA for improving the temporal resolution and also measured the velocity to evaluate the accuracy of phase information. We used 0.32T MRI scanner(Magfinder II, Scimedix, Korea). Using the 2D PC MRA pulse sequence, the vascular images for a human brain targeted on the Superior Sagittal Sinus(SSS) were obtained. We applied tukey window function for keyhole images to minimize the ringing artifact and erroneous factors that are induced frequency discontinuous and phase information loss. We also applied zero-padded algorithm to peripheral missing k-space lines to compare keyhole imaging results and the artifact power(AP) value was measured on the complex difference images to validate the image quality. Consider as based on our results, heavy image distortions and artifacts were shown until using at least 50% keyhole factor. Using above the 50% keyhole factors are shown well reconstructed and matched for magnitude images and velocity information measurements. In conclusion, we confirmed the image quality and velocity information of keyhole technique combined 2D PC MRA. Especially, measured velocity information through the keyhole imaging combination was similar to the velocity information of full sampled k-space image despite of frequency discontinuous and phase information loss in the keyhole imaging reconstruction process. Consequently, the keyhole imaging combined 2D PC MRA will give some clinical usefulness and advantages as improving the temporal resolution and measuring the velocity information via selecting the appropriate keyhole factor at low tesla MRI system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.74-81
• /
• 2013

This research was performed to identify physical properties of polysulfide epoxy polymer concrete for ultra-thin bridge deck pavement, and improve domestic applicability. With the optimum mix ratio determined from mixing experiments of polymer concretes, compressive, flexural, and bond strength were tested to identify its strength properties along with the freezing-thawing resistance test to evaluate its durability in harsh environments. As a result, the tested polymer concretes showed excellent performance in strength and deflection characteristic and all tested strength satisfied the criteria of American Concrete Institute. Moreover, it had better performance under variable temperatures comparing to other existing pavement materials. By the results of freezing-thawing resistance test and strength measurement for specimens underwent the freezing-thawing process, it can be judged that there is no such problem to the concrete's durability. In conclusion, the newly developed polymer concrete in this research has appropriate properties for use in ultra-thin pavement on bridge deck, and moreover it has superior applicability in comparison with former materials due to its improved temperature sensitivity.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.2
• /
• pp.179-188
• /
• 2011

Objectives : The study set out to analyze correlations between emotional labor and job stress among dental hygienist, who have direct and lasting relationships with patients in dental clinic, and provide basic data to resolve stressors and manage stress. Methods : A survey was taken among dental hygienists working at dental clinics, and 200 questionnaires were used in analysis. The gathered data were put to Cronbach's alpha with the SPSS WIN12.0 program to test the reliability of the inventories to measure their emotional labor and job stress. In addition, correlation analysis was conducted to examine relations between the items of emotional labor and those of job stress along with regression analysis to examine relations between emotional labor and job stress. Finally, t-test and One-way ANOVA were conducted to test mean differences in the job stress items according to the degrees of emotional labor with the statistical significance level set at 0.05. Results : 1. The measurement tool used in the study recorded 0.7 for all the areas of Cronbach's alpha for internal reliability and thus achieved high reliability. 2. The overall mean of emotional labor was 2.74, which indicates that the dental hygienists had 'average' or higher stress for emotional labor. 3. Emotional labor had statistically significant relations with educational background, place of work, motivation to choose to be a dental hygienist, and religion of their general characteristics. 4. There was statistical significance in relations between general characteristics and job stress according to educational background, position at work, and experience with change of occupation. 5. The correlations between emotional labor and the stress areas were analyzed. As a result, emotional labor was in positive(+) correlations with job demand, lack of job autonomy, relational conflict, job instability, organizational system, and corporate culture. In addition, regression analysis was conducted to test causal relations between emotional labor and job stress. The results indicate that there were positive(+) influences between emotional labor and job stress. Conclusions : The results show that emotional labor can serve as a mediating variable for job stress in dental clinic. Thus both dental clinics and dental hygienists need to have ways to deal with job stress derived from emotional labor in which they are forced to process their emotions according to the dental clinics' demands, properly. The study will hopefully trigger ongoing follow-up researches on the deployment of dental hygienists according to their job characteristics and the situational variables to alleviate the negative results of emotional labor.

• Information Systems Review
• /
• v.17 no.2
• /
• pp.49-75
• /
• 2015

In this study, we propose an ubiquitous computing technology (UCT) based construction management (CM) framework which is composed of processes, information systems, and organizations. For this, we first define 14 promising UCT based CM tasks from 140 candidate tasks using a matrix analysis technique. After defining the 14 tasks, we survey the construction management experts with questionnaire of the importance, improvement possibility, ease of implementation of the tasks. Based on the survey results, we select three high priority tasks: material management, operation management, inspection and measurement management. We conceptually design the framework, that is, processes, information systems, and organizations for the 3 tasks to be more innovative by applying the UCT to the CM tasks. Finally, we apply the proposed framework to some construction fields and estimate the effectiveness of the framework. Estimation results show that the CM tasks can be performed more quickly with less man powers using the UCT-based CM framework.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.2
• /
• pp.1-9
• /
• 2011

Objective : Study purpose is to inspect not only the utility of Evaluation of Social Interaction(ESI) but also the efficiency of occupational therapy measurement in program based local community of solitary senior citizen in G region. Methods : Six solitary senior citizen in G region were participating in a community-based program were a convenience sample for this study. The Occupational Therapy Intervention Process Model (OTIPM) provided the theoretical framework. The ESI provided a pre-test performance measure and also served as a guide for an five-week occupational therapy intervention program, and as a post-test to measure intervention effectiveness. Results : This study showed that the ESI was effective in guiding therapist Intervention related to social skill performance of participants during their participation in a community-based program. As a group, the difference between pre and post ESI logit measures was also significant(t=-7.362, p=0.001). Conclusion : The study provides initial considerations for the utility of the ESI to guide intervention related to social skill performance during daily occupations in Korea. It further documents the effectiveness of the ESI in measuring occupational therapy intervention, based on OTIPM, and supports occupational therapy services provided in a community based program context for those solitary senior citizen.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.169-175
• /
• 2014

Digital ink-jet printing system has many advantages such as fast and fine printing of various images, high efficiency and low cost process. Generally digital ink-jet printing requires ceramic pigments of cyan, magenta, yellow and black with thermal and glaze stability above $1000^{\circ}C$ for the application of porcelain product design. In this study, pink-red colored $CaO-SnO_2-Cr_2O_3-SiO_2$ pigment was synthesized using solid state reaction. The synthesis conditions of $Ca(Cr,Sn)SiO_5$ pigment such as annealing temperature, amount of mineralizer and non-stoichiometric composition were optimized. Crystal structure and morphology of the obtained $Ca(Cr,Sn)SiO_5$ pigment were analyzed using XRD, SEM, PSA, FT-IR and effect of Cr substitution on the pigment color was analyzed using Uv-vis. spectrophotometer and CIE $L^*a^*b^*$ measurement.

• Korean Journal of Veterinary Research
• /
• v.27 no.2
• /
• pp.321-330
• /
• 1987

In the endemic area of bovine piroplasmosis in Chonbuk Province, total of 486 heads of Holstein cow selected from 14 farms randomly were examined the infection status of piroplasma and their blood values. The results obtained were summarized as follows: 1. The etiological agent was only Theileria sergenti and none of the Babesia sp. infection. 2. All of the 486 heads of examined cow were infected with Theileria sergenti (100%). 3. In the initial examination of 11 farms in early summer, the means of blood values were as follows; RBC:$526{\pm}84(10^4/mm^3$), Ht:$27.9{\pm}2.8%$, SP:$7.5{\pm}0.6g/dl$, WBC: $11586{\pm}354/mm^3$, and Fibrinogen: $578.5{\pm}164.1mg/dl$. 4. In the second examinations in slimmer season, the blood values of examined cows had little varieties. But in the winter season, cows housed in the barn, the blood values were greatly increased; RBC: $601{\pm}77(10^4/mm^3)$, (F-value: 37.186**), Ht: $30.5{\pm}1.3%$(F-value: 15.626**) Hb: $12.2{\pm}1.3g/dl$(F-value: 5.899**), SP: $7.4{\pm}0.6g/dl$(F-value: 5.05**). 5. To determine the piroplasma infection in the many herds of cow, the measurement of Ht, Hb, and SP values etc. were more effective and helpful to find the weak cow because the examined process are not only to be easily carry out many samples but also to be done very simple and rapidly. 6. The indications of therapeutic standard values were stablished as follows; the less than 20% in the Ht value, below the 10g/dl in the Hb value, and less than 6g/dl in SP value. When the one among the therapeutic standard values, Ht, Hb, and SP was below the therapeutic standard value, the cow was treated with nutriments. When more than two among them were below the therapeutic standard, the cow was treated with Berenil, at once. In this way, there was no one head which represented clinical signs of piroplasmosis among 486 heads of cow at 14 farms during the year of 1986. 7. In a Korean native cattle infected with Thieleria sergenti seriously, the recovery of blood values was very prolonged by the treatment of Berenil only. But by the transfusion of 300ml blood collected from normal cow, the blood values were recovered rapidly.