• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.458-458
• /
• 2013

We investigated a study on the thermal degradation of boron doped zinc-oxide (BZO) layer which used as a transparent conducting layer on the Cu (In1-xGax) Se2 (CIGS) based thin film solar cells. Devices were annealed under the temperature of $100^{\circ}C$ or 100 hours and then Hall measurement was carried out to characterize the parameters of mobility (${\mu}Hall$), resistivity (${\rho}$), conductivity (${\sigma}$) and sheet resistance (Rsh). The initial values of ${\mu}Hall$, ${\rho}$, ${\sigma}$ and Rsh were $29.3cm^2$/$V{\cdot}s$, $2.1{\times}10^{-3}{\Omega}{\cdot}cm$, $476.4{\Omega}^{-1}{\cdot}cm^{-1}$ and $19.1{\Omega}$/${\Box}$ respectively. After the annealing process, the values were $4.5cm^2$/$V{\cdot}s$, $12.8{\times}10^{-3}{\Omega}{\cdot}cm$, $77.9{\Omega}^{-1}{\cdot}cm^{-1}$ and $116.6{\Omega}$/${\Box}$ respectively. We observed that ${\mu}Hall$ and ${\sigma}$ were decreased, and ${\rho}$ and Rsh were increased. In this study, BZO layer plays an important role of conducting path for electrons generated by incident light onthe CIGS absorption layer. Therefore, the degradation of BZO layer characterized by the parameters of ${\mu}Hall$, ${\rho}$, ${\sigma}$ and Rsh, affect to the cell efficiency.

• Korean journal of food and cookery science
• /
• v.33 no.1
• /
• pp.94-103
• /
• 2017

Purpose: This study developed sourdough bread according to consumers' preferencesby shortening the sourdough fermentation process time through addition of makgeolli to sourdough. Methods: Fermentation time was measured by adding makgeolli and water to wheat flour. Results: Fermentation time was shorter than that of starter made with only water and flour, with 5 hours of primary fermentation and 3 hours of secondary fermentation. The optimum mixing ratio was 400 g of flour, 192 mL of water, and 48 mL of makgeolli. An increase in makgeolli sourdough content decreased crude protein and moisture contents of white bread. Crude fat and ash contents increased, and volume of bread was decreased as sourdough increased. The height of bread prepared with makgeolli sourdough was lower than that of bread without makgeolli sourdough. According to the results of the texture measurement, hardness, gumminess, and chewiness of sourdough group were lower as the addition of sourdough increased. Addition of makgeolli sourdough to white bread resulted in decreased lightness, but increased yellowness of white bread. Preparation of white bread with addition of sourdough improved taste and flavor compared to bread prepared only with wheat flour. Conclusion: The highest sensory preference was observed for white bread prepared whit 5 g of sourdough.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.9-15
• /
• 2019

The flash points of DMF based organic solvent mixtures used in the synthetic leather manufacturing process were measured. The test group was composed of seven types of solvent mixtures, which included DMF, toluene, and MEK. Each flash point was tested according to the international standard test methods of KS M 2010. The flash points were then predicted using some prediction models and compared with the measured data. From the analysis results, the binary mixtures with a mole ratio of less than approximately 0.7 showed that the measured values were under 25 ℃. This showed that the expectation for the flammable risk lowering effects due to the mixing of high flash point materials was reduced. In addition, the predicted values were evaluated using the average absolute deviation (A.A.D). The results showed that the Le Chatelier's models had an "A.A.D" of 1.95 ℃ and were the closest to the measured values.

• Journal of Korean Elementary Science Education
• /
• v.18 no.2
• /
• pp.21-33
• /
• 1999

The purpose of this study was to develop an Instrument for the Measurement of Cognitive Conflict Levels of students who confronted with an anomalous situation in science teaming. Anomalous situation is generated when students' prediction is disconsistent with the observed fact. In this study, the researchers identified 4 components of cognitive conflict and developed three items for each component. The items were developed and revised by four pilot tests. In the first pilot test, 55 elementary school students participated in the test In the second pilot test, 88 students of the 5th and 6th grader participated in the test. The instrument of measuring cognitive conflict levels was given to the subjects right after demonstrating anomalous situation. For the demonstration, two different problem situations were developed: one was a pulley problem and the other was electric bulbs in parallel. Answered reasons for each items were analyzed to assess students' understanding on each items. In third pilot test, 125 elementary school students participated in the test. A factor analysis of the responses was carried out and reliability of the test was assessed by calculating internal consistency values. The items were finalized by three pilot tests. After 1 month after the third pilot test, researchers conducted the finalized test items to 323 students of the 5th and 6th grader. The final instrument showed moderate reliability (Cronbach-α 0.82∼0.87) and good content validity(0.93). A factor analysis of the response was carried out. 4 main factors completely coincided with 4 components that we supposed to be the conducts of cognitive conflict. The instrument can provide a means for both teachers and researchers to assess the cognitive conflict of a large number of students within a single class period. The results can be used by teachers to better understand the process of conceptual change of their students and to match instruction and materials accordingly.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.327-345
• /
• 2016

The purpose of this study was to carry out cognitive movement therapy program for children with affective and behavioral disorder based on neuro science, psychology, motor learning, muscle physiology, biomechanics, human motion analysis, movement control and to quantify characteristic of expression and gestures according to change of facial expression by emotional change. We could observe problematic expression of children with affective disorder, and could estimate the efficiency of application of movement therapy program by the face expression change of children with affective disorder. And it could be expected to accumulate data for early detection and therapy process of development disorder applying converged measurement and analytic method for human development by quantification of emotion and behavior therapy analysis, kinematic analysis. Therefore, the result of this study could be extendedly applied to the disabled, the elderly and the sick as well as children.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.64-76
• /
• 2002

This study was performed to identify the level of stress of clinical practice and clinical competency and the relationships between stress of clinical practice and clinical competency in nursing students. The subjects of this study were 379 senior nursing students in 2 nursing colleges in M city. The data were collected from November 5th to 24th, 2000, using questionnaire. The instruments used were the Stress of Clinical Practice Scale and the Clinical Competency Measurement Tool. The data were analyzed using frequency, percentage, t-test, ANOVA, and Pearson's Correlation Coefficient, using the SPSS program. The results of the study were as follows : 1. The mean score for the level of stress of clinical practice was 3.83 points. The stress of clinical practice were classified into six dimensions and their order of getting score was nurse(3.99), relationship between nursing theory and practice(3.94), human relationship (3.92), clinical education and evaluation by professors(3.87), environment(3.70), and patient(3.59). 2. The mean score for the level of clinical competency was 3.91 points. The clinical competency were classified into five dimensions and their order of getting score was professional development (4.08), skills (4.06) , interpersonal relationship/communication(3.95), teaching/coordinating(3.81), and nursing process(3.70), 3. The stress of clinical practice showed significant difference in the score of grade(t=-2.82, p=.005), interpersonal relationship(t=1.97, p=.049) and satisfaction of major(F=3.38, p=.035) of nursing students. 4. The clinical competency showed significant difference in the score of grade(t=-5.97, p=.000). interpersonal relationship(t=3.64, p=.000) and satisfaction of major(F=8.73, p=.000) of nursing students. 5. The data showed the positive correlations between stress of clinical practice and clinical competency(r=.209, p=.000). In conclusion. this study found that the stress of clinical practice was significantly related to clinical competency in nursing students. Therefore further study is needed to examine the efficient coping strategies about stress of clinical practice in nursing students.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.4
• /
• pp.243-250
• /
• 2011

In order to investigate the effects of PAG oil concentration on heat transfer performance and pressure drop during gas cooling process of $CO_2$, the experiments on fin-tube heat exchanger of $CO_2$ heat pump were performed. The experimental apparatus consists of a gas cooler, a heater, a chiller, a mass flow meter, a pump and measurement system. Experiments were conducted in various experimental conditions, which were inlet temperature($110^{\circ}C$), mass flow rates (50, 55, 60, 65, 70 g/s) and PAG oil concentration(0 to 2.6 wt%). Heat transfer rate decreased with the increase of the oil concentration and the decrease of inlet pressure. And pressure drop increased with the increase of the oil concentration and mass flow rate of refrigerant. The COP reduction by deterioration of gas cooler performance with oil concentration was analyzed. When inlet pressure of gas cooler is 100 bar, the COP reduction was estimated by 6% under 1 wt% of oil concentration.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.195-201
• /
• 2020

There have been many developments and innovations in the educational environments in line with the rapidly evolving information age. E-Learning is a representative example of this rapid evolution. However, E-Learning is challenging to maintain students' concentration because of the low engagement level and limited interactions between instructors and students. Additionally, instructors have limitations in identifying learners' concentration. This paper proposes a system that can measure E-learning users' concentration levels by detecting the users' eyelid movement and the top of the head. The system recognizes the eyelid and the top of the head and measures the learners' concentration level. Detection of the eyelid and the top of the head triggers an event to assess the learners' concentration level based on the users' response. After this process, the system provides a normalized concentration score to the instructor. Experiments with experimental groups and control groups were conducted to verify and validate the system, and the concentration score showed more than 90% accuracy.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.16-22
• /
• 2020

Since it is difficult for individual power producers and non-professionals who lack basic knowledge to control, manage, and operate facilities through EMS (Energy Management System), augmented reality and virtual reality monitoring systems are applied. However, in the existing systems, data access efficiency is inferior due to the process of analyzing column values for analog signal values collected from sensors and converting data after combining the columns. In addition, high-speed operation processing is difficult due to a large number of indexes for accommodating access patterns for various analog signal waveforms. Therefore, in this paper, a bitmap generator is inserted into a non-tree structure to convert the data collected from power facilities into physical property information, and the converted information is encrypted with a common key, so that the resources for the resources shared between each device are We propose a method of exchanging data for an augmented reality-based power system that is controlled by measurement.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.67-72
• /
• 2010

This study was done to provide basic data on the safety of professionals in medical imaging system by measuring the electromagnetic waves generated in the medical imaging system being used in medical organization. The studied medical imaging systems were general X-ray system, computed tomography(CT), ultrasonographic(USG) system, magnetic resonance imaging(MRI), PET-CT and fluoroscopic(R/F) system, and through these devices, electric field and magnetic field were measured and analyzed. As a result of the analysis, the measured values classified by the medical organizations were not much significant, but in the measurement by the medical imaging systems, there were high hazard elements in the sequential order of electric field PET-CT($17.7{\pm}22.9$)v/m, CT($10.3{\pm}8.7$)v/m, general X-ray system($8.8{\pm}8.8$)v/m, magnetic field general X-ray system($5.06{\pm}8.26$)mG, CT($2.71{\pm}4.53$)mG and PET-CT($0.74{\pm}0.34$)mG, the systems that adopted X-ray as main ray source, and the more aged the medical imaging systems, the greater the effects of electro-magnetic waves($10.6{\pm}15.93v/m$ for 5 years or more, $6.14{\pm}5.60v/m$ for 5 years or less). The effects of electromagnetic waves on medical imaging systems or facilities were not much when the notification of ministry of knowledge economy is considered, but in the overall perspective considering all the equipments and facility of the medical organization, such effects were significant. It is determined that sustainable safety managements of electric field and magnetic field must be done during process from medical imaging system installation to maintenance to rule out such factors.