• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1095-1103
• /
• 2014

WBAN has received great attention recently due to its versatile applicability. In this paper, antennas suitable for WBAN communication depending on the locations of mobile devices and the manufacturing of a human equivalent phantom are introduced. The effect of the body on the communication performance is largely dependent on the locations of devices. Specifically, the radiation and return loss characteristics of the antenna are greatly influenced by the characteristics of a medium existing in the near-field of an antenna. Thus, the proper WBAN antenna design is important in establishing a successful communication link between the transceivers. To consider the effect of the body on the antenna performance, the human equivalent phantom is also important factor in the WBAN antenna design and measurement. In introduction, categorization of the WBAN communication channel is introduced and antenna characteristics required for each communication channel are described. In the main subject section, several WBAN antenna design examples along with the implementation of the human equivalent phantom are discussed. In conclusion, the factors, which have to be considered in the design process, and future research are mentioned.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1166-1172
• /
• 2012

In this paper, by using a commercial EM simulator, we could obtain the array manifold which are phase responses of an array antenna for the incident plane wave and then verified the effectiveness of methodology after comparing with the measurement. The result shows that the array manifold can be calculated including not only the phase response of the ideal point sources but also the influences of the mutual coupling between antennas and the installed platform. Also it can exclude the interference of strong broadcasting signal and the disturbance of the multipath in the calibration process. Finally, to predict the performances of direction finding systems, a novel method using both the EM simulation-based receiving signal and the sparsely sampled array manifold with the parabolic estimation is proposed. This method can be utilized in the various fields of direction-finding since it shows the superior predictive performance even in low SNR conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.572-579
• /
• 2008

To predict the system coverage in the middle frequency(MF) band, it is required to know the antenna efficiency at a base station. However, calculating the accurate efficiency is difficult since the efficiency may change according to the area where the antenna is installed. Thus, this paper proposes a method to obtain the antenna efficiency of a base station in the MF band from the measurement. This method uses the measured field strengths and the attenuation model in the MF band. Therefore, an attenuation model which is used in the proposed method is presented at first. Then, the process of the proposed method is followed using detailed explanations. Finally, antenna efficiencies of base stations which are currently operating are obtained by applying the proposed method and the usefulness of the obtained results are verified by comparing with ideal efficiencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.825-833
• /
• 2016

This paper introduces a direct-conversion CMOS RF transmitter for the IEEE 802.15.4 standard with a low-power high-gain up-conversion mixer designed in $0.18{\mu}m$ process. The designed RF DCT(Direct Conversion Transmitter) is composed of differential DAC(Digital to Analog Converter), passive low-pass filter, quadrature active mixer and drive amplifier. The most important characteristic in designing RF DCT is to satisfy the 2.4 GHz Zigbee standard in low power. The quadrature active mixer inside the proposed RF DCT provides enough high gain as well as sufficient linearity using a gain boosting technique. The measurement results for the proposed transmitter show very low power consumption of 7.8 mA, output power more than 0 dBm and ACPR (Adjacent Channel Power Ratio) of -30 dBc.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.1-6
• /
• 2007

It is important to manage and correctly evaluate the performance of server in order to improve he performance of server. That is, with the aim of finding whether resources are properly utilized, it is a method to improve both software and hardware aspects. Conventional method in evaluating the server performance involved installing software between server and client and generating the load and by simulating the process, it evaluated the handing efficiency of work load generated per packet volume. Therefore, this paper aims to pro-vide precise measurement method by distinguishing the characteristics of web server and the users' usage pattern and by evaluating the work load management through applying various standards. Specially, it presents the evaluation method from web service of personal and business.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.3-9
• /
• 2015

A web application that allows a web service created by a internal developer who has security awareness show certain level of security. However, in the case of development by outsourcing, it is inevitable to implement the development centered on requested function rather than the issue of security. Thus in this paper, we improve the software testing process focusing on security for exclusion the leakage of important information and using an unauthorized service that results from the use of the vulnerable web application. The proposed model is able to consider security in the initial stage of development even when outsourced web application, especially, It can prevent the development schedule delay caused by the occurrence of modification for program created by programer who has low security awareness. This result shows that this model can be applied to the national defense area for increasing demand web application centered resource management system to be able to prevent service of web application with security vulnerability based on high test.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.38-41
• /
• 2004

The oxidizer plays an important role in the metal chemical mechanical polishing(CMP) slurry. Currently, the oxidizer used in CMP slurry is nearly divided into several kinds such as $Fe(NO_3)_3$, $H_2O_2$, $KIO_3$, and $H_5IO_6$. It is generally known that oxidizer character of $H_2O_2$ is more effective than other oxidizers. In this work, we have been studied the characteristics for the $H_2O_2$ concentration of copper slurry, which can applicable in the recent semiconductor manufacturing process. Also, it plays an important role in the planarization of copper films using copper slurries during micro-electronic device fabrication. In this work, we confirmed that removal rate of Cu/TaN changed by $H_2O_2$ concentration on copper slurry. And we used $KMnO_4$ in the measurement method of $H_2O_2$. In analysis results, we confirmed that the difference of results is large. We thought that the difference was due to organic component existence. So in titration method of $H_2O_2$ concentration, we used $Na_2S_2O_3$ instead of $KMnO_4$ as solution. Consequently, using the titration method, we could calculate correct data reduced error. And $H_2O_2$ concentration has been adjusted to the target concentration of 0.1 wt%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.62-67
• /
• 2012

Owing to the rapid growth of mobile and electronic equipment miniaturization technology, the supply of micro mobile computing machine has been fast raised. Accordingly they have performed many researches on energy harvesting technology to provide promising power supply equipment to substitute existing batteries. In this paper, in order to have low resonance frequency for piezoelectric energy harvester, we have tried to make it larger than before by adopting nickel that has much higher density than silicon. We have applied it for our energy harvesting actuator instead of the existing silicon based actuator. Through such new concept and approach, we have designed energy harvesting device and made it personally by making with micromachining process. The energy harvester structure has a cantilever type and has a dimension of $10{\times}2.5{\times}0.1\;mm^3$ for length, width and thickness respectively. Its electrode type is formed by using Au/Ti of interdigitate d33 mode. The pattern size and gap size is 50 ${\mu}m$. Based on the measurement of the nickel-based piezoelectric energy harvester, it is found to have 778 Hz for a resonant frequency with no proof mass. In that resonance frequency we could get a maximum output power of 76 ${\mu}W$ at 4.8 $M{\Omega}$ being applied with 1 g acceleration.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.2
• /
• pp.65-77
• /
• 2018

Purpose: By identifying the contents of the "Empty Home Utilization & Community Revitalization Model Project" which is a pilot project of empty homes back into use in Kyoto City and analyzing the characteristics of the case housing, the purpose of this study is to find out implications and suggest improvements for the domestic empty home utilization project. Methods: The scope of the survey covers seven project sites in the period from 2014 to 2016. The research method is to derive the physical and operational characteristics of the project, through the literature reviews related to bringing empty homes back into use in Kyoto City and the field survey including the space measurement and the operator interview. Results: First, in order to succeed in bringing empty homes back into use for community revitalization, the selection process of the project and the role of the public in and after supporting the project are important. Second, the important features that are required as a physical characteristic of the project are an advantage in location and an interactive space that is available at all time like a community cafe at the entrance. Third, as an operational characteristic of the empty home utilization project, it is advantageous for the local residents to participate as a business actor or an operator, and it is the continuous use of residents and outsiders by implementing an operating program that is suitable for the characteristics of the local community. Implications: The physical and operational activation factors to bring empty homes back into use need to be included as the project screening standards. And it is necessary for the public to develop the Intermediate Support Organization and to participate in linking with residents in order to carry out the empty homes utilization project effectively.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.209-220
• /
• 2013

The process of designing and building a human-powered aircraft (HPA) and its performance analysis are introduced in this paper. Light Bros, the Chungnam National University HPA team, has developed Volante, a HPA, to compete in the 2012 exhibition of human-powered aircraft hosted by Korea Aerospace Research Institute. The power train system is composed of a two-blade propeller and Bevel-type gear and the ground test bed is built to simulate the operation. A study has been made to find a efficient propeller based upon the test result of thrust and power available from a pilot under various propeller conditions and running time. The load and structural analysis is conducted for the glider-shaped wing made of composite material which has very high aspect ratio. The spar is analyzed using finite element modeling followed by the comparison of its displacement and strain on structural test. As a result, the performance and safety is confirmed.