• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1446-1452
• /
• 2008

Recently many Company are investing time and money in the implementation of the Knowledge Management System (KMS). The scales and methodologies of their investment fur KMS has various appearances according to company-size and also level of understanding about KMS systems. The interest in KMS is increased with the P. Druckers assertion that the economic power shifts to the person who can manage the "Knowledge". But there is also mistrust about ROI of KMS related with the management performances. In this paper The level of Codification and Personalization of Practice Types of KMS will be analyzed in order to make an empirical analysis about the Irrelevance between KMS-Investment and corporate performances. To complete this study, correlation- and average analysis will be performed. As the measurement parameters for the corporate performances, we use the 4 categories, Financial, Customer, Process and Education-Growth Aspect, of BSC (Balanced ScoreCard) concept.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.175-199
• /
• 2013

The purpose of this paper is tthe first, diagnosing the effect of terminal operating strategy which Busan Port container operators established and executed by the strategy execution process (XPP) model, second, enhancing the competitiveness of Busan Port Container Terminal by presenting ways to improve the executive ability of strategies. In order to achieve the purpose, this study utilized XPP 6 steps diagnostic variables of Kaplan and Dr. Norton for problems of the strategy execution of Busan Port container operators and conducted the survey of 7-point scale targeting employees of Busan Port container operators for the variable measurement.

• Smart Structures and Systems
• /
• v.1 no.1
• /
• pp.83-101
• /
• 2005

This paper summarizes the application of a rational methodology for the structural assessment of older reinforced concrete Tunisian bridges. This methodology is based on ambient vibration measurement of the bridge, identification of the structure's modal signature and finite element model updating. The selected case study is the Boujnah bridge of the Tunis-Msaken Highway. This bridge is made of a continuous four-span simply supported reinforced concrete slab without girders resting on elastomeric bearings at each support. Ambient vibration tests were conducted on the bridge using a data acquisition system with nine force-balance accelerometers placed at selected locations of the bridge. The Enhanced Frequency Domain Decomposition technique was applied to extract the dynamic characteristics of the bridge. The finite element model was updated in order to obtain a reasonable correlation between experimental and numerical modal properties. For the model updating part of the study, the parameters selected for the updating process include the concrete modulus of elasticity, the elastic bearing stiffness and the foundation spring stiffnesses. The primary objective of the paper is to demonstrate the use of the Enhanced Frequency Domain Decomposition technique combined with model updating to provide data that could be used to assess the structural condition of the selected bridge. The application of the proposed methodology led to a relatively faithful linear elastic model of the bridge in its present condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.4
• /
• pp.351-359
• /
• 2007

Multi-axial compression tests have been frequently conducted to evaluate the in situ properties of rock masses and the mechanical behaviors of rock strata through the model tests. Without the proper boundary condition for the model tests, the mechanical behavior of rock mass would deviate, as can be expected, from the in situ conditions. The boundary condition will affect the internal stress distribution of the specimens and cause some distortion on the measurement. In this study, a design process regarding the steel brush, which has been employed for multi-axial compression test to reduce the frictional restraint along the specimen/loading platen interface, is introduced. The individual brushes are regarded as a simple column and beam to calculate the cross-sectional size and length of the brushes in consideration of the buckling capacity and the allowable deflection.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4843-4846
• /
• 2014

Background: Acute lymphoblastic leukemia (ALL) is most common in childhood. Inhibin (a non-steroidal glycoprotein hormone of gonadal origin) can be used as marker of fertility. The current study was conducted to evaluate inhibin levels in ALL patients and to estimate its correlation with some antioxidants in these in comparison with control subjects. Materials and Methods: This study was conducted on sixty patients with ALL and thirty children as controls. Fasting blood samples were taken from each subject and analyzed for haemoglobin, serum protein, vitamin E and C, in addition to glutathione and inhibin. Results: The results of the study showed highly significant decreases (p<0.001) in haemoglobin, glutathione and inhibin levels with significant decreases (p<0.05) in serum protein and vitamin E levels for patients group in comparison with controls while there was no significant differences in vitamin C. Moreover, there were significant correlations between inhibin levels and serum protein, glutathione and both vitamins (E and C) in the ALL patient group (r= 0.81, 0.80, 0.77 and 0.69, respectively). Conclusions: The present results indicated infertility in patients with ALL demonstrated by low inhibin level as a consequence of abnormality in anti-oxidative metabolism due to the cancer process. So, it can be suggested the need for routine measurement of inhibin for leukemic patients to estimate the action of hormones of gonadal origin.

• Journal of Powder Materials
• /
• v.22 no.3
• /
• pp.181-186
• /
• 2015

In this study, the effect of the friction stir welding (FSW) was compared with that of the gas tungsten arc welding (GTAW) on the microstructure and microhardness of Cu-Ni alloy weldment. The weldment of 10 mm thickness was fabricated by FSW and GTAW, respectively. Both weldments were compared with each other by optical microstructure, microhardness test and grain size measurement. Results of this study suggest that the microhardness decreased from the base metal (BM) to the heat affected zone (HAZ) and increased at fusion zone (FZ) of GTAW and stir zone (SZ) of FSW. the minimum Hv value of both weldment was obtained at HAZ, respectively, which represents the softening zone, whereas Hv value of FSW weldment was little higher than that of GTAW weldment. These phenomena can be explained by the grain size difference between HAZs of each weldment. Grain size was increased at the HAZ during FSW and GTAW. Because FSW is a solid-state joining process obtaining the lower heat-input generated by rotating shoulder than heat generated in the arc of GTAW.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.158-168
• /
• 2007

The cement industry is one of the energy intensive industries such as petrochemical and steel industry. The energy efficiency of cement industry is high comparing to oversea's cement industries due to the enforcement of energy conservation policies. The purpose of this study is estimate emission factors for greenhouse gas ($CO_{2}$) in cement industry. The results of field study, quicklime contained quantity of five factories were $0.64{\sim}0.65$. Measurement emission (15,382 ton/day) is 40% higher than process emission (8,929 ton/day) on the IPCC Guidelines (1996). Add to combustion emission on the lines of IPCC Guidelines (1996) is similar to the emission of this study. The emission factor of greenhouse gas ($CO_{2}$) were as follows the emission factor between $9.01E-01{\sim}2.15E-01\;ton/ton$ for $CO_{2}$. The result of this study is higher than emission factor of IPCC (0.51) but it is similar to U.S. EPA's (0.952).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.892-898
• /
• 2008

3D rapid prototyping is the manufacturing technology to fabricate a prototype with the data stored in a computer, which differs from conventional casting technology in terms of an additive process. Various 3D rapid prototyping techniques such as stereolithograpy. fused deposition modeling. selective laser sintering, laminated object manufacturing have been developed but among them, 3D inkjet printing has a unique feature that materials could be jetted to directly form the body of a prototype, which could be a finished product functionally and structurally. However, this needs ink with a high solid content, which tends to increase the dynamic viscosity of ink. The increase of ink viscositytends to restrict the jettable range of ink and hence the jetting conditions should be optimized. The intrinsic speed of sound in a hot melt ink with ceramic nanoparticles dispersed is one of key components to determine the jettable range of ink. In this paper, the way to measure the intrinsic speed of sound in a hot melt ceramic ink is proposed and its influence on the jetting condition is discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2131-2134
• /
• 2015

In this study, It has been demonstrated a new and realizable possibility of the ferroelectric random access memory devices by all solution processing method with paper substrates. Organic ferroelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) thin films were formed on paper substrate with Al electrode for the bottom gate structure using spin-coating technique. Then, they were subjected to annealing process for crystallization. The fabricated PVDF-TrFE thin films were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was found from polarization versus electric field (P-E) measurement that a PVDF-TrFE thin film on paper substrate showed very good ferroelectric property. This result agree well with that of a PVDF-TrFE thin film fabricated on the rigid Si substrate. It anticipated that these results will lead to the emergence of printable electron devices on paper. Furthermore, it could be fabricated by a solution processing method for ferroelectric random access memory device, which is reliable and very inexpensive, has a high density, and can be also fabricated easily.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.811-818
• /
• 2016

A continuous fine-tuning phase locked loop with an additional negative feedback loop has been proposed. When the phase locked loop is out-of-lock, the phase locked loop has a fast locking characteristic using the continuous band-selection loop. When the phase locked loop is near in-lock, the bandwidth is narrowed with the fine loop. The additional negative feedback loop consists of a voltage controlled oscillator, a frequency voltage converter and its internal loop filter. It serves a negative feedback function to the main phase locked loop, and improves the phase noise characteristics and the stability of the proposed phase locked loop. The additional negative feedback loop makes the continuous fine-tuning loop work stably without any voltage fluctuation in the loop filter. Measurement results of the fabricated phase locked loop in $0.18{\mu}m$ CMOS process show that the phase noise is -109.6dBc/Hz at 2MHz offset from 742.8MHz carrier frequency.