• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.507-516
• /
• 2010

Stationary combustion sources such as coal-fired power plants, waste incinerators, industrial manufacturing, etc. are recognized as major sources of mercury emissions. Due to rapid economic growth, zinc production in Korea has increased significantly during the last 30 years. Total zinc production in Korea exceeded 739,000 tons in 2008, and Korea is currently the third largest zinc producing country in the world. Previous studies have revealed that zinc smelting has become one of the largest single sectors of total mercury emissions in the World. However, studies on this sector are very limited, and a large gap in the knowledge regarding emissions from this sector needs to be bridged. In this paper, Hg emission measurements were performed to develop emission factors from zinc smelting process. Stack sampling and analysis were carried out utilizing the Ontario Hydro method and US EPA method 101A. Preliminary data showed that $Hg^0$ concentrations in the flue gas ranged from 4.56 to $9.90\;{\mu}g/m^3$ with an average of $6.40\;{\mu}g/m^3$, Hg(p) concentrations ranged from 0.03 to $0.09\;{\mu}g/m^3$ with an average of $0.04\;{\mu}g/m^3$, and RGM concentrations ranged from 0.23 to $1.17\;{\mu}g/m^3$ with an average of $6.40\;{\mu}g/m^3$. To date, emission factors of 7.5~8.0 g/ton for Europe, North America and Australia, and of 20 or 25 g/ton for Africa, Asia and South America are widely accepted by researchers. In this study, Hg emission factors were estimated using the data measured at the commercial facilities as emissions per ton of zinc product. Emission factors for mercury from zinc smelting pross ranged from 4.32 to 12.96 mg/ton with an average of 8.31 mg/ton. The emission factors that we obtained in this study are relatively low, considering Hg contents in the zinc ores and control technology in use. However, as these values are estimated by limited data of single measurement of each, the emission factor and total emission amount must be updated in future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.42-48
• /
• 2016

In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3~3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.17-22
• /
• 1999

In this paper, the results of the studies about a new proposal where the ONON(oxide-nitride-oxide-nitride) layer instead of the conventional ONO(oxide-nitride-oxide) layer is used as the IPD(inter-poly-dielectrics) layer to improve the data retention problem in the Flash EEPROM cell, have been discussed. For these studies, the stacked-gate Flash EEPROM cell with an about 10nm thick gate oxide and on ONO or ONON IPD layer have been fabricated. The measurement results have shown that the data retention characteristics of the devices with the ONO IPD layer are significantly degraded with an activation energy of 0.78 eV. which is much lower than the minimum value (1.0 eV) required for the Flash EEPROM cell. This is believed to be due to the partial or whole etching of the top oxide of the IPD layer during the cleaning process performed just prior to the dry oxidation process to grow the gate oxide of the peripheral MOSFET devices. Whereas the data retention characteristics of the devices with the ONON IPD layer have been found to be much (more than 50%) improved with an activation energy of 1.10 eV. This must be because the thin nitride layer on the top oxide layer in the ONON IPD layer protected the top oxide layer from being etched during the cleaning process.

• Journal of The Korean Association For Science Education
• /
• v.18 no.1
• /
• pp.19-34
• /
• 1998

This study compared junior high school science textbooks(for grade $7{\sim}9$) of the USA, Australia, Japan, and Korea. Specifically, the amount and pattern of knowledge, process skills, activities, contexts, nature of science, and integration topics were compared in terms of country, grade, and content. The results of analysis are as follow: 1) Physics, chemistry, biology, and earth science were equally distributed in textbooks of Korea and Japan. In Korean textbooks, "law" was more emphasized compared with other countries' textbooks. 2) The most popular process skills were proportion and controlling variables in Korea's textbooks. Correlation, cause/effect, and proportion in Japan's textbooks. Controlling variables and data transformation in textbooks of USA and Australia. 3) Experiment and observation were the most popular activities in textbooks of Korea, Japan, and Australia. In textbooks of the USA, observation, experiment, survey, practice, and measurement activities were used evenly. 4) In textbooks of Korea and Japan, pure science and natural environment contexts were the most popular. 5) There was no chapter dealing with nature of science in textbooks of Korea and Japan. 6) Integration topics between science and technology were the most popular. Based on these findings, several implications on Korean science textbooks were discussed.

• Asia pacific journal of information systems
• /
• v.18 no.2
• /
• pp.15-40
• /
• 2008

With the explosive growth of the Internet, Internet shopping malls have become recognized as one of the major purchasing channels for consumers, as well as one of the competitive distribution channels for companies that allow them to contact with customers without intermediaries. It has motivated information systems(IS) researchers to examine the factors influencing consumer behavior and the purchase decision process in the context of Internet shopping malls. Despite the extensive research that has been conducted on the purchase decision process of consumers in online shopping malls, the results have demonstrated a need for further understanding of consumer behavior due to the unique features of virtual space and the characteristics of online consumers. Previous studies from marketing and consumer behavior domains have suggested that the concept of involvement plays an important role in explaining consumers' purchase behavior. Despite the critical role of involvement and the explosive growth of e-commerce, little research has examined the role of involvement in the Internet shopping mall context. With this motivation, this study has two research objectives. First, it introduces and tests an theoretical model capable of better explaining consumers' intention to purchase in the Internet shopping mall context. The proposed model extends and integrates existing models on purchase intention by incorporating purchase experience, innovativeness, and perceived self-control as the consumer factors, along with perceived risk, information provision, and perceived price as the Internet shopping mall factors. Second, this study examines how involvement differences may affect consumers' intention to purchase. For this purpose, two factors from involvement theory, involvement type and involvement level, are introduced into the research model as moderating variables. In order to test the proposed model, the overall approach employed was a field study using the structural equation model. We developed our data collection instrument by adopting existing validated questions wherever possible. All question items were measured with a seven-point, Likert-type scale, with anchors ranging from 'strongly disagree' to 'strongly agree.' Two IS researchers reviewed the instrument and checked its face validity. We collected empirical data for this study over a period of two weeks from subjects who had purchase experiences through Internet shopping malls. A total of 473 complete and valid responses were obtained. We carried out data analysis using a two-step methodology with AMOS 4.0. The first step in the data analysis was to establish the convergent and discriminant validity of the constructs. In the second step, we examined the structural model based on the cleansed measurement model. The empirical results partly support the proposed model and identify the moderating effect of involvement differences. Theoretical and practical implications of the study are discussed, along with its limitations.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.61-66
• /
• 2018

This research scrutinizes the self-annealing characteristics of copper used to metal interconnection for application of DRAM fabrication process. As the time goes after the copper deposited, the grain of copper is growing. It is called self-annealing. We use the electroplating method for copper deposition and estimate two kinds of electroplating chemicals having different organic additives. As the time of self-annealing is elapsed, sheet resistance decreases with logarithmic dependence of time and is finally saturated. The improvement of sheet resistance is approximately 20%. The saturation time of experimental sample is shorter than that of reference sample. We can find that self-annealing is highly efficient in grain growth of copper through the measurement of TEM analysis. The structure of copper grain is similar to the bamboo type useful for current flow. The results of thermal excursion characteristics show that the reliability of self-annealed sample is better than that of sample annealed at higher temperature. The self-annealed sample is not contained in hillock. The self-annealed samples grow until $2{\mu}m$ and develop in [100] direction more favorable for reliability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.69-74
• /
• 2010

A new package substrate for dynamic random access memory(DRAM) devices has been developed using selective aluminum anodization. Unlike the conventional substrate structure commonly made by laminating epoxy-based core and copper clad, this substrate consists of bottom aluminum, middle anodic aluminum oxide and top copper. Anodization process on the aluminum substrate provides thick aluminum oxide used as a dielectric layer in the package substrate. Placing copper traces on the anodic aluminum oxide layer, the resulting two-layer metal structure is completed in the package substrate. Selective anodization process makes it possible to construct a fully filled via structure. Also, putting vias directly in the bonding pads and the ball pads in the substrate design, via in pad structure is applied in this work. These arrangement of via in pad and two-layer metal structure make routing easier and thus provide more design flexibility. In a substrate design, all signal lines are routed based on the transmission line scheme of finite-width coplanar waveguide or microstrip with a characteristic impedance of about $50{\Omega}$ for better signal transmission. The property and performance of anodic alumina based package substrate such as layer structure, design method, fabrication process and measurement characteristics are investigated in detail.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.687-692
• /
• 2010

This paper surveys emission characteristics of Far-infrared of the fabrics fabricated with germanium imbedded sheath-core conjugate composite filaments. For this purpose, master batch chip was prepared with PET semi-dull chip and nano sized germanium particles and sheath-core type conjugate composite filament was spun using this master batch chip and polyester semi dull. The emission power and emissivity of the germanium imbedded fabrics were measured and investigated using FT-IR spectrophotometer by KICM- FIR 1005 measurement method. In addition, the fabric mechanical properties were measured and discussed with the effects of the optimum texturing process conditions and fabric structural design conditions. The sheath/core type PET composite germanium imbedded filaments were manufactured by the optimum spinning condition, its tenacity and breaking strain showed the same level as the regular PET filament. The tenacity and breaking strain of the DTY showed good physical properties and no problem in the weaving process. Then, wet and dry shrinkages showed higher values than those of regular PET filament. The emission power of the germanium imbedded fabric was $3.53{\times}10^2W/m^2$ at the $5-20{\mu}m$ wave length range, and emissivity was 0.874. The fabric hand of germanium imbedded fabrics was inhanced by the optimum texturing process and fabric structural design with improved mechanical properties such as fabric bending and compressional properties.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2389-2395
• /
• 2015

An accurate feedback about customer satisfaction is a very important factor to efficiently manage achievements in the service industry. However, Korea is lack of quantitative and standardized system of customer satisfaction measurement. This paper suggests standardized survey system with more in-depth and various methods of questionnaire survey as well as analysis which is able to efficiently evaluate customer satisfaction. This system is that investigates customer satisfaction of process based services, which uses various methods including simply designed questionnaires, customer satisfaction survey via mobile, and an investigation on follow-up satisfaction rate. In addition, we adopted scoring system to digitize a degree of satisfaction rate, so the suggested system provides an opportunity to improve specific objects those need to be improved by clearly evaluating a degree of satisfaction rate and applying various analysis techniques, such as IPA (Importance Performance Analysis), process analysis, and expectation analysis etc. This study substantiates suggested system through applying it to travel agency which is a representative enterprise of tour service.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.94-101
• /
• 2019

In this study, the FEM technique was applied to design the shape of the horn that transmits ultrasonic vibration energy to the base material, and the shape of the welding horn with a one-wavelength bar shape used in the 20kHz region was designed. The shape design of the horn was performed by applying the rod longitudinal vibration theory to Ansys APDL (Ansys Parametric Design Language). Twenty-five models were designed using the ratio of the area of the input and output surfaces of the vibration and the length of the horn to derive the appropriate horn shape. The horn was designed with a total length of 130mm, a step length of 65mm, and an output area of 28.79mm. The horn was fabricated using the optimized dimensions, and the vibration and displacement characteristics of the horn were evaluated using the measurement system. Finally, a uniform longitudinal step horn was designed, and more than 97.4% of the uniformity of the tip was secured. The amplitude ratio of the optimized horn was improved by 51%.