• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.99-99
• /
• 2008

To grow the large diameter GaN with high structure and optical quality has been obtained by hydride vapor phase epitaxy(HVPE) method. In addition to the nitridation of $Al_2O_3$ substrate, we also developed a "step-growth process" to reduce or to eliminate the bowing of the GaN substrate caused by thermal mismatch during cool down after growth. The as-grown 380um thickness and 75mm diameter GaN layer was separated from the sapphire substrate by laser-induced lift-off process at $600^{\circ}C$. A problem with the free-standing wafer is the typically large bowing of such a wafer, due to the built in the defect concentration near GaN-sapphire interface. A polished G-surface of the GaN substrate were characterized by room temperature Double crystal X-ray diffraction (DCXRD), photoluminescence(PL) measurement, giving rise to the full-width at half maximum(FWHM) of the rocking curve of about 107 arcsec and dislocation density of $6.2\times10^6/cm^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.237-238
• /
• 2008

Electrical properties of Pd/Zn/Pd/Au contacts to p-InP were investigated as function of the V/III ratio of p-InP. P-type InP was made by the Zn diffusion into InP and activation process with rapid thermal annealing (RTA) measurement. After activation, the hole concentration was two orders of magnitude higher than that of the sample having only diffusion process. According to transmission line method (TLM) results, the specific contact resistance of p-InP was lower as used InP having the lower V/III ratio. The experimental results represent that the diffusion of Zn in undoped InP deeply related to the equilibrium between interstitials and substitutional Zn is established via indium interstitials.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.9-13
• /
• 2014

Effects of neutron irradiation on the superconducting properties of the undoped $MgB_2$ and the carbon(C)-doped $MgB_2$ bulk superconductors, prepared by an in situ reaction process using Mg and B powder, were investigated. The prepared $MgB_2$ samples were neutron-irradiated at the neutron fluence of $10^{16}-10^{18}n/cm^2$ in a Hanaro nuclear reactor of KAERI involving both fast and thermal neutron. The magnetic moment-temperature (M-T) and magnetization-magnetic field (M-H) curves before/after irradiation were obtained using magnetic property measurement system (MPMS). The superconducting critical temperature ($T_c$) and transition width were estimated from the M-T curves and critical current density ($J_c$) was estimated from the M-H curves using a Bean's critical model. The $T_cs$ of the undoped $MgB_2$ and C-doped $MgB_2$ before irradiation were 36.9-37.0 K and 36.6-36.8 K, respectively. The $T_cs$ decreased to 33.2 K and 31.6 K, respectively after irradiation at neutron fluence of $7.16{\times}10^{17}n/cm^2$, and decreased to 22.6 K and 24.0 K, respectively, at $3.13{\times}10^{18}n/cm^2$. The $J_c$ cross-over was observed at the high magnetic field of 5.2 T for the undoped $MgB_2$ irradiated at $7.16{\times}10^{17}n/cm^2$. The $T_c$ and $J_c$ variation after the neutron irradiation at various neutron fluences were explained in terms of the defect formation in the superconducting matrix by neutron irradiation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.489-494
• /
• 2004

Long Period Gratings (LPG) is currently receiving considerable attention because of their consistent measuring results fur pressure, temperature, strain and flow. LPG is easier to prepare and has a high sensitivity compared with Fiber Bragg Gratings (FBG). In addition, this kind of optical fiber sensors could be used for implementations in various structures. In this paper, LPG was used to monitor in situ the resin flow and the curing process in VARTM (Vacuum Assisted Resin Transfer. Molding). In order to demonstrate the effectiveness of the method, FBG is inserted into the glass mat to monitor the resin flow using optical spectrum analyzer (OSA). The curing reactions in VARTM are also observed using the same method. From the results, the attenuation wavelength shift and the loss change of attenuation band can be obtained from the status of the RTM (Resin Transfer Molding) sample owing to the internal variations of the .effective index, temperature, and pressure. It is shown that the proposed LPG is more effective in monitoring the curing reaction than FBG.

• The Journal of Fisheries Business Administration
• /
• v.42 no.2
• /
• pp.47-68
• /
• 2011

Values are lasting beliefs that are at the center of human behavior and not be often changed. Different values make different behaviors, and similar values form similar behaviors. Consumers' values affect not only the cognitive process but also behaviors in a powerful and comprehensive way. There have been many studies regarding prediction of consumer patterns and identification, measurement methods of values. This is because if we can accurately measure the value system, it can be used in many areas of marketing such as market segmentation, new product development, and advertisement. In case of seafood, it is also necessary to make marketing strategies by segmenting consumers based on their value systems. The objectives of this study are as follows: First, it is to find out the connection process from the properties of seafood products that consumers consider important, to the benefits, and finally to the values they pursue by applying the means-end chain theory, using the Laddering method. Second, using a two-step cluster analysis, we aim to segment seafood markets based on consumers' values and investigate characteristics of segmented markets. Based on objectives, it is expected that this study would provide informations on seafood consumers and help to establish seafood marketing strategies for producers and distributors. Analytical results of the value system using a means-end chain theory indicated that there were seven complete links, that is, ladders among fresh seafood products. In case of processed seafood products, there were total 9 complete ladders. The empirical analytical results of market segmentation according to the values showed fresh seafood products were divided into three groups. In case of processed seafood products were segmented into two groups.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.50-59
• /
• 1995

Abstract 6 H - SiC single crystal was grown by sublimation growth system which was self - designed and manufactured. In order that the SiC source might be decomposited and sublimed and deposited on the 6H - seed substrate grown by Acheson method, the temperature gradient, the growth parameters of growth temperature and pressure were operately adjusted. So we could get the optimum temperature gradient inside of the crucible. The graphite crucible with SiC powder and thermal shield componants were purified at the elevated temperature by means of Ar purging process and the source baking, then it distributed to reduce the amount of the impurities come from those parts. It was recognized that the optimum growth temperature of the crucible was$2300~2400^{\circ}C$ at the Ar atmospheric pressure of 200~400 torr, and at that moment the growth rate was 500~1000 $\mu\textrm{m}$. And then, the as- grown crystal was cut with the wafer form, the evaluation about the crystal was carried out by XRD, the optical microscopic observation and FT IR spectrum measurement.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2589-2594
• /
• 2009

Aging phenomena of plasma polymer films were studied by using the surface analysis techniques of contact angle measurement, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOFSIMS), and atomic force microscopy (AFM). The polymer films were grown on an aluminum substrate by using a plasma polymerization method from a gas mixture of acetylene and helium, and the films were subsequently modified to have a hydrophilic surface by oxygen plasma treatment. Aging of the polymer films was examined by exposing the samples to water and air environments. The aging process increased the hydrophobicity of the surface, as revealed by an increase in the advancing contact angle of water. XPS analysis showed that the population of oxygen-containing polar groups increased due to the uptake of oxygen during the aging, whereas TOF-SIMS analysis revealed a decrease in the polar group population in the uppermost surface layer. The results suggest that the change in surface property from hydrophilic to hydrophobic nature results from the restructuring of polymer chains near the surface, rather than compositional change of the surface. Oxidative degradation may enhance the mobility and the restructuring process of polymer chains.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.11-17
• /
• 1989

Pyrazinium chlorochromate and dipyrazinium trichromate which are pyrazinium salts were prepared by the each reaction of pyrazine with chromium trioxide under the presence of HCl and $CH_2Cl_2$. These compounds wese nonhygroscopic and were solved in water very well. Physical properties such as solubility, pH, electrical conductivity, and melting point were measured. These compounds were considered to be ionic ; $C_4H_4N_2H^+$, $CrO_3Cl^-$, $Cr_3O^{2-}_{10}$ by the measurement of electrical conductivity. It was found that CrO$_3$ was formed in the first decomposition process of salts and it was changed into $Cr_2O_3$ in the second process as its weight is decreased. It was also found that especially under the same condition dipyrazinium salt was in the form of isopoly ($Cr_2O^{2-}_{10}$)anion which has been thought to be in the form of $Cr_2O^{2-}_{7}$ obtained from pyridine.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.202-209
• /
• 2014

In this paper, a developed device for detecting target's location and avoiding collision is proposed. Velocity and acceleration model of target are derived to estimate target's information, i.e. position, velocity and acceleration considering process and measurement noise. Kalman filtering method applied to the estimation process and its results was confirmed by simulation. The distance measurements system using laser sensor for moving target system is also developed to confirm the effectiveness of the proposed scheme. Experiments to get information of moving target with velocity and acceleration model was executed. The data with filtering and without filtering was compared by experiments. Discontinuous measured data was changed to smooth and continuous data by Kalman filtering. It is confirmed that desired data was obtained by applying proposed scheme. UI for measuring and monitoring the target data is developed and visual and auditory alarm function is attached on the system Finally, position estimation system of moving target with good performance is achieved by low price equipments.

• Journal of Sasang Constitutional Medicine
• /
• v.27 no.2
• /
• pp.222-230
• /
• 2015

Objectives The purpose of this study is to design a research to find clinical factors involved in the decision-making process for determining the constitutional prescription based on prospective clinical data. Methods We have created a draft of the case report form. Therefore, seven constitutional experts was interviewed for additional items to be important used to determine the constitutional prescription in clinic. Interviews were done from December 2012 to March 2014, experts per person 2-3 times, took time of about 120 minutes per interview. Since then, we developed the final case report form through the expert meeting. At the same time, the developing the electronic case report form (eCRF) and the protocol to collect constitutional treatment cases was also discussed. Results & Conclusions The items of the case report form were subject general, lifestyle, health measurement, record of expert, prescription and evaluation after medication. The part of the clinical symptoms of the record of expert allowed to be recorded in the 5-point scale for the collection of quantitative data as much as possible. Assuming a re-visit of the patient, if necessary, twice the recording were to be possible. At the same time, the eCRF and the protocol to collect constitutional treatment cases were also developed. In this study, it will be able to more objectively standardize the medical decision making process that the experts of constitutional prescription decision. As a result, it will be possible to provide the standardized constitutional medical services.