• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.79-88
• /
• 2023

As the number of deteriorated buildings increases, the importance of safety diagnosis, maintenance, and the repair of buildings also increases. Traditionally, building condition assessments are performed by one person or one company and various inspections are needed. This entails a subjective judgment by the inspector, resulting in different assessment results, poor objectivity and a lack of reliability. Therefore, this study proposed a method to bring about accurate grading results of building conditions. The limitations of visual inspection and condition assessment processes previously conducted were identified by reviewing existing studies. Building defect data was collected using the reverse-engineered three-dimensional (3D) model. The accuracy of the results was verified by comparing them with the actual evaluation results. The results show a 50% time-saving to the same area with an accuracy of approximately 90%. Consequently, defect data with high objectivity and reliability were acquired by measuring the length, area, and width. In addition, the proposed method can improve the efficiency of the building diagnosis process.

• Journal of Drive and Control
• /
• v.18 no.2
• /
• pp.20-31
• /
• 2021

An excavator is a construction machine that can perform various tasks such as trenching, piping, excavating, slope cutting, grading, and rock demolishing. In the 2010s, unmanned construction equipment using ICT technology was continuously developed. In this paper, the path design process was studied to implement the output data of the decision stage, and the path design algorithm was developed. For example, the output data of the decision stage were terrain data around the excavator, excavator mechanism information, excavator hydraulic information, the position and posture of the bucket at key points, the speed of the desired bucket path, and the required excavation volume. The result of the path design was the movement of the hydraulic cylinder, boom arm, bucket, and bucket edge. The core functions of the path design algorithm are the function of avoiding impact during the excavation process, the function to calculate the excavation depth that satisfies the required excavation volume, and the function that allows the bucket to pass through the main points of the excavation process while maintaining the speed of the desired path. In particular, in the process of developing the last function, the node tracking method expressed in the path design table was newly developed. The path design algorithm was verified as this path design satisfied the JCMAS H02 requirement.

• Journal of Educational Research in Mathematics
• /
• v.18 no.3
• /
• pp.335-352
• /
• 2008

The purpose of this research was to investigate the descriptive evaluation method that focuses on the problem solving process of the student. The goal was to evaluate the students' understanding of the subject rather than the students' ability to find the final answer. The descriptive evaluation is being suggested as a way of examining the thought process of the student by performing a structured analysis of the problem solving process. Today, there are not enough descriptive evaluation resources available for teachers to effectively carry out this alternative assessment method in the elementary school mathematics curriculum. This research is a case study on the development of resources for descriptive evaluation in grade 4 mathematics. We designed the development process for descriptive evaluation and its rubric for all 8 units of the 4-Na level of mathematics in the elementary school curriculum. Three descriptive problems were developed for each of the 8 units for a total of 24 problems. The rubric consisted of three areas of assessment, 1) understanding of the problem, 2) problem solving, and 3) mathematical communication. The problems were first pilot tested in two 4th grade classes. Modified problems were then tested in a different 4th grade classroom. The study showed that the three defined areas of evaluation framework (problem understanding, problem solving and mathematical communication) were measurable and analyzable using the developed grading rubric. We then conclude that he descriptive evaluation could be used as an effective tool for improving teacher performance in elementary school mathematics.

• Agricultural and Biosystems Engineering
• /
• v.4 no.1
• /
• pp.16-21
• /
• 2003

In the agricultural field, a machine vision system has been widely used to automate most inspection processes especially in quality grading. Though machine vision system was very effective in quantifying geometrical quality factors, it had a deficiency in quantifying color information. This study was conducted to evaluate color of beef using machine vision system. Though measuring color of a beef using machine vision system had an advantage of covering whole lean tissue area at a time compared to a colorimeter, it revealed the problem of sensitivity depending on the system components such as types of camera, lighting conditions, and so on. The effect of color balancing control of a camera was investigated and multi-layer BP neural network based color calibration process was developed. Color calibration network model was trained using reference color patches and showed the high correlation with L*a*b* coordinates of a colorimeter. The proposed calibration process showed the successful adaptability to various measurement environments such as different types of cameras and light sources. Compared results with the proposed calibration process and MLR based calibration were also presented. Color calibration network was also successfully applied to measure the color of the beef. However, it was suggested that reflectance properties of reference materials for calibration and test materials should be considered to achieve more accurate color measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.636-639
• /
• 2002

This article is focused on the research for the system design that isolate noxious data from internet for juveniles Normally, by motivating this software which was designed to isolate noxious data, harmful data was deleted or graded But these normal process contains a lot of complexity, for example, essential continual upgrade, grading mistake, etc. So, to solve these fallacy, word-weighting process, where several harmful words which can be optained in internet site are discriminance and weighted, is utilized by using AC machine. At the result, the isolation rate of harmful site rose up to 90%, which means this process is greatly efficient.

• Journal of Korean Port Research
• /
• v.7 no.1
• /
• pp.5-12
• /
• 1993

In complex decision making such as ill-defined system, one of the main problem is how to treat ambiguous aspect of the decision making. According to the complexity and ambiguity of the objective systems, many types of evaluation attributes are necessary for the rational decision and the relationship among the attributes become complex and fuzzy. Fuzzy integral is very effective to evalute the complex system with interaction between attributes but how to save the evaluation efforts in the decision making process of grading the membership of the objects or alternative is the problem to be tackled. Because the more object there are to evaluate, the number of decisions to made increase exponentially. Therefore, this paper aimes to propose a new evaluation algorithm based on fuzzy integral which can save the evaluator's efforts in decision making process. The proposed algorithm is constructed as follows : First, compose the fuzzy measure by introducing AHP(Analytical Hierachy Process) & mutual interaction coefficient. Second, generate fuzzy measure value of monotone family set for calculating the fuzzy integral. The effectiveness of the proposed algorithm is investigated through the example and sensitivity of interaction coefficient is illustrated.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.105-125
• /
• 1992

The research, aiming an automatic pattern design of Korean Costume by utilizing CAD system, tried Grading, Seaming and Marking with a theme of girl's color-strip blouse & skirt. The content & conclusion of the research can be outlined as follows; 1) As we reviewed the current situation of Korean costume which becomes more likely celebrational or festival costume, while the demand of it is getting increase, it's being dealt mostly as ready-made dresses with different qualities & designs. Especially childrens ready-made ones were highly demanded to be picked up as the theme. 2) For the original drawing of children's color-strip blouse & skirt, Kyung-Ja Park's drawing method was used here, and for the substitute of particular body parts absolute size, Joo-Won Lee's standard size chart from a size-study by ages. 3) To work with CAD system we had input master pattern, drawn for age 5 as basic size, then graded six step-sizes for 1-11 years old. For add-subtract of particular body parts size, we graded through computing the standard variation among items to get the pattern developed into ready-made standard size, we can make precise plotting by grading wanted size very rapidly if we correct the rule of changed items different from standard size to make utilization possible enough with easy order method of ready-made Korean Dress. 4) We produced Marker after attaching a margin to seam accordingly by parts for each pattern using P/D/S to mark, In mass gament-cutting, the loss of time and material can minimized. In this research the apparel CAD system which has been utilized and only be western fashion industry was introduced for the design of ready-made Korean costume and utilized it in Grading, Marking which are critical steps to improve productivity and have reported the result in the research. Thus we expect that less cost, improved productivity and better quality with minimized loss of material from marking as well as from prompt and precise size-drawing. Furthermore the utilization of CAD system is considered as an effective one in terms of the research & the development to remove effective one in terms of the research & the development to remove irrational elements in the design and production process of Korean costume as well as in terms of the study of Korean Costume development through creative works of Korean Costume.

• The Research Journal of the Costume Culture
• /
• v.7 no.6
• /
• pp.116-128
• /
• 1999

The purpose of this study is to improve the rinkage between apparel industy and a university education on clothing construction. The random survey was carried out on 207 patternists, working at 64 apparel companies. In this study such factors as the individual characteristics, the method of pattern making, work, and an educational institution of pattern making were investigated. The results of this study are as follow : 1. Male workers are mainly thirties and forties who graduated high school with 5 years experience or more. Female workers are mostly twenties who graduated junior college with 5 years experience or less. 2. In a way of working, male patternists tend to perform pattern making by using drafting method while female patternists generally choose apparel CAD system for grading and marking.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.121-128
• /
• 1995

Information about retinal blood vessels can be used in grading disease severity or as part of the process of automated diagnosis of diseases with ocular menifestations. In this paper, we address the problem of detecting retinal blood vessels and optic disk (papilla) in eye-fundus images. We introduce an algorithm for feature extraction based on Fuzzy Clustering algorithm (fuzzy c-means). A method of finding the optic disk (papilla) is proposed in the eye-fundus images. Additionally, the inrormations such as position and area of the optic disk are extracted. The results are compared to those obtained from other methods. The automatic detection of retinal blood vessels and optic disk in the eye-rundus images could help physicians in diagnosing ocular diseases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.3 s.28
• /
• pp.319-331
• /
• 1988

The purpose of this study was to develop a computer program for pattern making of women's Dooroomaky. The following results were given through utilizing the Computer in pattern making of Dooroomaky for women. 1. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern making. 2. Basic pattern was drafted by the hand-operation. In this study, this Dooroomaky basic pattern was selected. And a computer program for drafting was developed. Refer to