• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.116-129
• /
• 2020

Resilience is defined as the intrinsic ability of a system to adjust its functioning prior to, during, or following changes and disturbances, so that it can sustain required operations or functions with the related systems under both expected and unexpected conditions. Resilience engineering is a relatively new paradigm for safety management that focuses on how to cope with complexity under pressure or disturbance to achieve successful functioning. This study aims to develop a quantitative resilience model for severe accident response organizations of nuclear power plants using the Analytic Hierarchy Process (AHP) method. First, we investigated severe accident response organizations based on a radiation emergency plan in the Korean case and developed a qualitative resilience model for the organizations with resilience-influencing factors, which have been identified in the author's previous studies. Then, a quantitative model for entire severe accident response organizations was developed by using the Analytic Hierarchy Process (AHP) method with a tool for System Dynamics. For applying the AHP method, several experts who are working on implementing, regulating or researching the severe accident response participated in collecting their expertise on the relative importance between all the possible relations in the model. Finally, a sensitivity analysis was carried out to discuss which factors have the most influenceable on resilience.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.10
• /
• pp.1808-1819
• /
• 2017

Knowledge on the functional characteristics and temporal variation of anaerobic bacterial populations is important for better understanding of the microbial process of two-stage anaerobic reactors. However, owing to the high diversity of anaerobic bacteria, close attention should be prioritized to the frequently abundant bacteria that were defined as core bacteria and putatively functionally important. In this study, using MiSeq sequencing technology, the core bacterial community of 98 operational taxonomic units (OTUs) was determined in a two-stage upflow blanket filter reactor treating pharmaceutical wastewater. The core bacterial community accounted for 61.66% of the total sequences and accurately predicted the sample location in the principal coordinates analysis scatter plot as the total bacterial OTUs did. The core bacterial community in the first-stage (FS) and second-stage (SS) reactors were generally distinct, in that the FS core bacterial community was indicated to be more related to a higher-level fermentation process, and the SS core bacterial community contained more microbes in syntrophic cooperation with methanogens. Moreover, the different responses of the FS and SS core bacterial communities to the temperature shock and influent disturbance caused by solid contamination were fully investigated. Co-occurring analysis at the Order level implied that Bacteroidales, Selenomonadales, Anaerolineales, Syneristales, and Thermotogales might play key roles in anaerobic digestion due to their high abundance and tight correlation with other microbes. These findings advance our knowledge about the core bacterial community and its temporal variability for future comparative research and improvement of the two-stage anaerobic system operation.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.306-313
• /
• 2011

Lactic acid is widely used in the food, chemical and pharmaceutical industries, and there is an increasing demand for lactic acid as the raw material of polylactic acid, which is a biodegradable polymer. The presence of high boilers and non volatility of lactic acid makes the separation of lactic acid very difficult job. Esterification of lactic acid with methanol followed by hydrolysis of the separated methyl lactate was employed for the recovery of lactic acid. Reactive dividing wall column was proposed for the simultaneous reaction and separation. The intensified process poses a challenging control problem. Dynamic characteristics of the proposed process were examined and control systems were proposed to get a stable control performance for a disturbance in feed. Control performances of the proposed control systems were compared.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.287-296
• /
• 1989

Fractures of the mandibular condyle are among the most frequently occuring facial bone fractures. Anatomical structures around the joint inhibit the ideal reposition of the fragments, so variable treatment modalities have been tried selectivly. There can be functional disturbances postoperatively, and normalization of joint function must be considered primarily in treatment planning. Secondly, the possible joint ankylosis and facial deformity following developmental disturbance of facial skeleton must be considered. The authors reviewed 73 patients treated in Dept. of Oral and Maxillofacial Surgery. Inje College of medicine Pusan Paik Hospital from 1981 to 1987. Also literatures were reviewed, and we obtained some reference points concerning the selection of the treatment modality and prevention of the possible complication.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.219-227
• /
• 2020

Tooth eruption involves a complex developmental process of tooth migration from the dental follicular origin to the final occlusion position in the oral cavity via the alveolar process. Disturbance of tooth eruption can occur at any point in a series of eruption stages; however, horizontal impaction of the mandibular first molar and primary retention of the primary mandibular second molar are rarely observed simultaneously. This study describes the treatment for two cases of horizontally impacted first molar with primary retention of primary molar. The primary retention of the primary mandibular second molar was extracted, and orthodontic traction was applied to the horizontally impacted primary mandibular first molar. Subsequently, displacement of the premolar tooth bud was improved and space regaining for eruption was achieved, guiding to normal eruption of the first molar.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1227-1234
• /
• 2013

An analog array with a 1.2 double poly floating gate transistor has been developed with a standard CMOS fabrication process. The programming of each cell by means of an efficient control circuit eliminates the unnecessary erasing operation which has been widely used in conventional analog memories. It is seen that the path of the signal for both the programming and the reading is almost exactly the same since just one comparator supports both operations. It helps to eliminate the effects of the amplifier input-offset voltage problem on the output voltage for the read operation. In the array, there is no pass transistor isolating a cell of interest from the adjacent cells in the array. Instead of the extra transistors, one extra bias voltage, Vmid, is employed. The experimental results from the memory shows that the resolution of the memory is equivalent to the information content of at least six digital cells. Programming/erasing of each cell is achieved with no detectable disturbance of adjacent cells. Finally, the unique shape of the injector structure in a EEPROM is adopted as a cell of analog array. It reduces the programming voltage below the transistor breakdown voltage without any special fabrication process.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.107-115
• /
• 2017

This study illustrated the process of bar structure and vegetation coverage to understand historical changes of riverbed and suppose adaptive management in Tan-chun ecological landscape reserve. The study site that lower reach of the Tan-chun are known as habitats of migratory bird and aquatic species with dynamic riverbed. Aerial photos from 2006 to 2016 and surveyed vegetation data in 2006 and 2016 were used by analysis of landscape changes and comparison of vegetation coverage. Study area is classified into 3 sites (A: straight site, B: meandering site, C: meandering and junction with Yangjae-cheon). The result showed that bar area of A and C sites gradually increased, B site decreased during 10 years. Also, ratio of bar area to vegetation coverage and level of vegetation coverage increased in all sites during 10 years. All sites seem to have experienced the terrestrialization with time. On the other hand, ratio of annual vegetation increased and ratio of perennial vegetation decreased in C site in 2016 compare to 2006. Because area of Japanese Hops (Humulus japonicas) as one type of annual vegetation increased, other vegetation could not grow up by its powerful expandability. It is time to make active adaptive management based on not only continuos monitoring but also revaluation of river conditions in order to enhance habitat quality and quantity in Tan-chun ecological landscape reserve.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.496-502
• /
• 2016

In this paper, we proposed and implemented a GUI-based system to recognize and record measured values of digital instruments in the industrial site through image processing. Unlike the existing vehicle license plate recognition system, the measured values of the measuring instrument are displayed on the LCD screen as digital numbers. So, the proposed system considers the decimal point, a negative sign, light reflected by LCD protective glass, and various disturbance factors. We used blob-labeling technique to recognize the numbers displayed on the LCD screen, the recognized number images were determined as certain numbers through the template matching, and recognized values were recorded in the storage device with measurement time. Therefore, the proposed system in this paper would reduce the burden of writing when recording the measured values of the inside/outside diameter or height of the product in the industrial site, so effective and errorless process management in production process is possible by preventing errors in recording measurements when written by hand.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.43-52
• /
• 2015

Constructions of buildings downtown are increasing as much as ever with a strong demand. Top-Down Method is suitable for its advantage in minimizing its disturbance to the neighborhood. Pre-founded when applied to CFT Column on-site welded is required for splicing. To complement the welded built-up square composite Column was developed. Top-down process will be pouring concrete in accordance with a step-by-step process. Thus, Pre-founded Column and cover concrete to determine the stress condition. Therefore, Concrete filled steel square tubular columns encased with precast concrete were studied. Five Centrally loaded Columns were tested to investigate the axial load carrying capacity. we analyzed the strength and behavior of CET Column by Loading conditions and concrete strength, thickness of cover concrete through structure experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.463-466
• /
• 2008

With the development of Information Technology in recent years, the image has been an important means to store or express information. Generally, during the process of acquiring and storing images, the images can be corrupted by noise of which typical types are Impulse(Impulse Noise) and AWGN(Addiction White Gaussian Noise). Impulse noise shows irregularly in black and white over the length and breadth of the image by sharp and sudden disturbance of the image signal. In the Impulse noise environment, SM(Standard Median) filter would be used because of its good noise removal performance and simple algorithm. However, when SM filter removes noise, it also produces error at the edge of image and causes whole image quality deterioration. In this paper, we propose a method based on modified nonlinear filter operation scheme which enhances the features of noise removal and detail image preservation when restoring image in Impulse noise environment. And, we compared it with existing methods and the performances through simulation.