• Korean Management Science Review
• /
• v.15 no.2
• /
• pp.201-210
• /
• 1998

Truck dispatching is one of the most commonly occurring problems of transprot management. We developed an interactive decision support system named IDSSTD, for the truck dispatching problem where two conflicting objectives are treated and travel speed varies depending on the passing areas and time of day. The IDSSTD aids the decision-making process by allowing the user to interact directly with the database, to direct data to a decision model, and to portray results in a convenient form. The IDSSTD is consisted of two major interactive phases. The pre-scheduling interactive phase is to reduce the complexity of a given problem before applying the BC-saving heuristic algorithm and the post-scheduling interactive phase is to improve practically the algorithmic solution. The IDSSTD has the capabilities of its own manipulation(analysis and recommendation) and diverse graphic features in order to facilitate a user's interaction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.7
• /
• pp.607-612
• /
• 2002

An automatic design method of behaviors in behavior-based robotics is proposed. With this method, a robot can design its behaviors by itself without aids of human designer. Automating design procedure of behaviors can make the human designer free from somewhat tedious endeavor that requires to predict all possible situations in which the robot will work and to design a suitable behavior for each situation. A simple reinforcement learning strategy is the main frame of this method and the key parameter of the learning process is significant change of reward value. A successful application to mobile robot navigation is reported too.

• Journal of the Korean School Mathematics Society
• /
• v.1 no.1
• /
• pp.69-79
• /
• 1998

My suggestions to the teachers on the basis of my research are as follows: 1. A mathematical curriculum in high school requires an intuitive understanding. I'm sure we can not only improve the student's intuition and imagination by Euler's insight and intellectual investigation, but also induce motive and interest in mathematical learning by increasing the inquiry activities. Therefore, I suggest that we take advantage of teaching aids available from this research by processing the units in the mathematical textbook. 2. We can feel the beauty of mathematics by Euler's symbols and simple formulas. We must take pride in teaching mathematics because the mathematical insight is very useful in the inqury process. 3. We have to model ourselves after Euler's spirit of inquiry and energetic activities.

• ALGAE
• /
• v.20 no.4
• /
• pp.315-324
• /
• 2005

Anatomical organization of Stoechospermum marginatum reveals small cortical cells with moderately dense cytoplasm, overlying a multilayered medulla comparatively poor in cytoplasmic contents. The anticlinal walls of cortical cells show local thickenings rich in alginic acids. Sori form on both thallus surfaces and show tetrasporangia, paraphyses and sterile-cells. The unicellular paraphyses are rich in sulphated polysaccharides whereas multicellular ones have abundance of not only polysaccharides, but also of vacuoles and phenols. The sterile-cells are modified cortical cells present on either side of the tetrasporangium and bear cytoplasmic strands towards soral cavity. Various stages of tetrasporogenesis are seen in a single sorus. The developing tetrasporangium shows a two layered wall, where the outer one is rich in alginic acid and inner has sulphated polysaccharides. An apical pad aids tetraspore release. Also involved in the release process are sterile-cells, paraphyses and polysaccharides.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.285-288
• /
• 2002

For real-time flood forecasting and effective control flood at the Youngsan estuary dam, the Flood Forecasting and Control User Interface System II (FFCUS II) has been developed. This paper describes the features and application of FFCUS II. FFCUS II is composed of the database management subsystem, the model subsystem, and the graphic user interface. The database management subsyem collects rainfall data and stream flow data, updates, processes, and searches the data. The model subsystem predicts the inflow hydrograph, the tide, forecasts flood hydrograph, and simulates the release rate from the sluice gates. The graphic user interface subsystem aids the user's decision-making process by displaying the operation results of the database management subsystem and model subsystem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.753-759
• /
• 2011

The HIV (Human Immunodeficiency Virus) causes AIDS (Acquired Immune Deficiency Syndrome). The process of infection and mutation by HIV can be described by a 3rd order state equation. For this HIV model that includes the dynamics of the mutant virus, we present a parameter estimation scheme using two state variables sporadically measured, out of the three, by employing a genetic algorithm. It is assumed that these non-uniformly sampled measurements are subject to random noises. The effectiveness of the proposed parameter estimation is demonstrated by simulations. In addition, the estimated parameters are used to analyze the equilibrium points of the HIV model, and the results are shown to be consistent with those previously obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.724-728
• /
• 1997

A CAD system of grid element for vacuum fluorescent disply has been developed. In order to reduce design man-houre and human erros, it is used to automate the design process using a knowledge base system. In the case of VFD product design, the most important consideration is the short-life cycle. So the development of CAD system for VFD product is needed. The developed system is based on the knowledge base system which is involved in a lot of expert's technology in the practice field. Using C-language under the HP-UNIX system, CIS customer language of the EXCESS CAD/CAM is used as the overall CAD environment. Results of this system will provide effective aids to the designer in this field

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.451-454
• /
• 2006

This paper presents an overview of ONP deinking efficiency with cellulolytic enzymes and synthetic collector in alkaline pH. Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.45-50
• /
• 1988

The measurement system of the pressure in engine cylinder is developed with the aids of the microcomputer, A/D converter and simple electrical circuits. The experiment is performed in 4 cycle single cylinder Gasoline engine. When data for the pressure progress is sampled, clock signal or signal from the crank angle is used as trigger. The variation of the pressure during the cycles can be well obtained experimentally. So, the informations which are necessary in the combustion analysis, i.e. expansion pressure, indicated mean effective pressure, the magnitude and time of the maximum pressure ignition time, the rate of pressure rise and heat release and combustion rates can be obtained by the calculation using experimental data. Also, the informations about the after-burning process, the existence of the detonation waves and end time of combustion can be investigated from this study.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.38-40
• /
• 2001

Measuring technology based on the computer and software is used worldwideiy by the aids of remarkably improved digital technology and measuring devices, and the electro- magnetic interference due to high currents and high voltages is being solved by the helps of applied optic instrumentation technology. The automatic acquisition, analysis and storage system of test data is available for utilizing the numerical computation technology. The measuring accuracy and testing efficiency are thus much higher because of the developed technologies. In this paper, the construction of data acquisition system in KERI including measuring devices and its application to the short circuit test are described, and additionally the algorithm of the analyzing program for the automatic process of test data and the results of analyses are described.