• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.24-25
• /
• 2003

Lead is ubiquitous in the human environment as a result of industrialization. China's rapid industrialization and traffic growth have increased the potential for lead emissions. Lead poisoning in children is one of the most common public health problems today, and it is entirely preventable. Children are more vulnerable to lead pollution and lead in their bodies can affect their nervous, circulatory, and digestive systems. Children are exposed to lead from different sources (such as paint, gasoline, and solder) and through different pathways (such as air, food, water, dust, and soil). Although all children are exposed to some lead from food, air, dust, and soil, some children are exposed to high dose sources of lead. Significant sources of lead for China's children include industrial emissions (often close to housing and schools), leaded gasoline, and occupational exposure that occurs when parents wear lead-contaminated clothing home from work, burning of coal for home heat and cooking, contaminated food, and some traditional medicines. To assess the blood lead level in children in China, a large-scale study was conducted in 19 cities among 9 provinces during 1997 to 2000. There were 6502 children, aged 3-5 years, were recruited in the study The result indicates that the mean blood lead level was 8.83ug/dl 3-5 year old living in city area. The mean blood lead level of boys was higher than that of girls (9.1l ug/dl vs 8.73ug/dl). Almost 30 percent childrens blood lead level exceeded 10ug/dl. The average blood lead level was higher than that of in 1985 (8.83ug/dl vs 8.lug/dl). An epidemiological study was carried on the children living around the cottage industries recycling the lead from battery. Nine hundreds fifty nine children, aged 5-12 years, living in lead polluted villages where the lead smelters located near the residential area and 207 control children live in unpolluted area were recruited in the study. The lead levels in air, soil, drinking water and crops were measured. The blood lead and ZnPP level were tested for all subjects. The results show that the local environment was polluted. The lead levels both in the air and crops were much higher than that of in control area. In the polluted area, the average blood level was 49.6ug/dl (rang 19.5-89.3ug/dl). Whereas, in the unpolluted area, the average blood level was 12.4ug/dl (rang 4.6-24.8ug/dl). This study indicates that in some countryside area, some cottage industries induce seriously lead pollution and cause children health problem. For the introducing of unleaded gasoline in some large cities, such as Beijing and Shanghai, the blood lead level showed a declined trend since 1997. By 2000, the use of leaded gasoline in motor vehicles has been prohibited in China. The most recent data available show that levels of lead in blood among children in Shanghai decreased from 8.3ug/dl in 1997 to 7.6ug/dl in 1999. The prevalence rate of children lead poisoning (blood lead >10ug/dl) was also decreased from 37.8% to 24.8%. In children living in downtown area, the blood lead level reduced dramatically. To explore the relationship between gene polymorphisms and individual susceptibility of lead poisoning, a molecular epidemiological study was conducted among children living in lead polluted environment. The result showed that the subjects with ALAD2 allele has higher ZPP level, and the subjects with VDR B allele has larger head circumference than only with b allele. In the present study, we demonstrated that ALAD genotypes modify lead effects on heme metabolism and VDR gene variants influence the skull development in highly exposed children. The polymorphism of ALAD and VDR genes might be the molecular inherited factor modifying the susceptibility of lead poisoning. Recently, Chinese government pays more attention to lead pollution and lead poisoning in children problem. The leaded gasoline was prohibited used in motor vehicles since 2000. The government has decided to have a clampdown on the high-polluted lead smelters for recycling the lead from battery in countryside. It is hopeful that the risk of lead poisoning in children will be decreased in the further

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2007년도 춘계 학술발표회 발표논문집
• /
• pp.308-311
• /
• 2007

황해의 25개 조사정점의 표층수에 대한 해양환경요인 및 식물플랑크톤 현존량의 월별 조사결과를 종합하여 주성분분석(PCA)을 실시한 결과 주성분 I에서는 변화를 26.6% 설명할 수 있으며, 이중 질산질소가 가장 많이 기여하였고, 이어서 용존무기질소, 규산규소, 수온, 용존산소, 암모니아질소 순으로 기여 하고 있었다. 주성분 II에서는 20.3%를 설명 할 수 있으며, 이중 용존산소가 가장 많이 기여하였고 그 외 엽록소 a, 수온, 염분, 규산규소, 식물플랑크톤 현존량 순으로 기여 하였다. 주성분 III에서는 15.1%를 설명 할 수 있으며, 이중 인산인이 가장 많이 기여하였고 그 외 염분, 아질산질소, 수온, 용존산소, 질산질소, 용존무기질소 순으로 기여하였다. PCA에 이용된 항목 중 부유물질은 제외한 모든 항목은 주성분 I, II, III에 5%이하 유의수준에서 의미 있는 상관성이 있었다. 주성분 I은 질산성질소, 용존무기질소, 규산규소, 인산인과는 긍정적인 상관성(p<0.0001)을 갖고, 수온, 암모니아질소와는 부정적인 상관성을 보였다(p<0.001). 주성분 II에서는 용존산소, 엽록소 a, 식물플랑크톤 현존량은 긍정적 상관성을 나타내었고, 수온, 염분, 규산규소와는 부정적인 상관성을 보였으며(p<0.0001), 주성분 III에서는 염분, 수온, 질산질소, 용존무기질소, 식물플랑크톤 현존량과는 긍정적인 상관성(P<0.0001)을 나타내었고 인산인, 아질산질소, 용존산소는 부정적인 상관성을 나타내었다 (p<0.01). 공간적인 분포특성은 조사정점에 따라 항목별 결과에 대한 분산이 커서 일정한 특성을 도출하기가 어려운 상태이나 대체로 PCA II축을 기준으로 상부인 $1/4{\sim}2/4$분면에 북부와 중부의 조사정점이 위치하고 음의 방향인 $3/4{\sim}4/4$분면에 중부와 남부의 조사정점이 위치하고 있어 북측의 307선과 308선 및 중부의 309선과 310선 그리고 남측의 311선과 312선으로 구분되어지는데 그 중에서 태안반도의 연안역인 307선의 03점은 계절에 변화가 가장 커서 분산의 폭이 심한 상태로서 다른 조사정점들과 구분되어진다. 전반적으로 북측해역에서는 용존산소, 엽록소 a, 식물플랑크톤 현존량이 남측해역에 비해 상대적으로 많은 반면, 남측해역은 수온과 염분 및 규산규소가 높은 상태이었다. 북쪽인 307선과 308선은 연안역과 외해에서 상대적으로 영양염류가 높았으며, 중부인 309선과 310선은 연안역과 준 외해역인 07점과 09점에서 영양염류가 높았었고, 남부 해역인 311선과 312선에서는 연안역에서 영양염류가 상대적으로 높은 경향을 나타내었다. 즉 황해 동부는 연안역에서는 조석간만의 차가 심하고, 새만금 및 시호호등과 같은 대규모의 간척 매립으로 육상의 오염원이 자정작용을 거치지 못하고 직접 연안으로 유입되고 있는 실정이다. 또한 10여 년 전부터 육지의 모래부족으로 다량의 바다 모래가 채취되어 왔고 그 량이 점차 증가추세이며, 중부외해역에서는 각종 폐기물 투기로 점차 영양염류의 부하량이 증가되고 있어 특히 질소계와 인의 영양염류 농도가 높아지고 있는 추세이다. 시간적 변동특성은 전반적으로 순환하는 형태를 유지하고 있다. 2005년 2월에는 질산질소, 용존무기질소, 규산규소, 인산인, 용존산소가 높았었으며 4월로 접어들면서 항목 간에 분산되는 경향을 보이면서 수온, 엽록소 a 및 식물플랑크톤이 증가 하면서 해역에 따라 좌우로 분산되는 경향을 나타내었고 6월에는 아질산질소를 제외한 영양염류가 감소하는 경향을 보였다. 8월에는 6월에 비해 수온이 높아지고 규산규소, 질산질소, 용존무기질소 등이 약간 증가추세이었으며 10월로 접어들면서 증가추세가 더 높아졌었고 12월에는 질산질소, 용존무기질소, 규산규소, 인산인, 용존산소가 높아졌었다. 2006년 4월에는 2005년 4월에 비해 수온, 엽록소 a, 식물플랑크톤의 현존량이 높아져서 전년 동시기와 약간 다른 양상을 보이고 있었다. 즉 동계인 2월을 시작으로 반 시계 또는 시계 방향으로 순환하는 형태를 유지하고 있으며, 4월은 2개년 비교해 보았을 때 해마다 해양환경에 따라 그 순환 정도 및 형태가 다를 것으로 추정된다.

• 아동간호학회:학술대회논문집
• /
• 아동간호학회 1997년도 정기총회 및 학술대회
• /
• pp.61-74
• /
• 1997

Endotracheal suctioning is a routine procedure used for clearing secretions from the airway of the intubated infant. This procedure is not without complications. Endotracheal suctioning has been associated with decreases in $PaO_2$, decreases in systemic venous oxygenation, alterations in mean arterial Pressure, disturbances in cardiac rhythm and development of nosocomial pneumonia. So several endotracheal suctioning techniques have been developed to prevent these blown complications. Another method of Endotracheal suctioning eliminates the risk associated with disconnecting the infant from the ventilatior to perform the suctioning procedure. Studies examining closed endotracheal suctioning methods reported that the closed method results in less arterial oxygen saturation, and less systemic venous oxygen desaturation. However those studies have focused on adult patients, and there have been no published studies for newborn infants. The specific purpose of this study is to investigate the two methods and to make a comparison in terms of (1)variations in $SaO_2$, heart rate, and respiration rate appeared before and after the endotracheal suctioning; (2)difference in occurrence of nosocomial infection; (3)difference in recovery time to arrive at pre-suction baseline after suctioning and in nursing time taken for the suctioning. The present study is based on the data obtained from two groups of newborn infants : one group comprises 8 infants with closed suctioning (a total of 304 suctions) among 17 infants treated with ventilator and the other group 9 infants with open method (a total of 629 suctions). The data were analyzed using the SPSS statistical program package. As the distribution test on dependent variables with the Skewnesser Shapiro Wilk test showed an asymmetric distribution, the Wilcoxon Matched-pairs Singled- Ranks test was used for the test of variations in $SaO_2$, heart rate, and respiration rate appeared before and after the endotracheal suctioning. The difference in $SaO_2$ recovery time and nursing time was analyzed with the Mann-Whitney U-Test. The difference in physiologic consequences and occurrence of nosocomial infection between the two groups was analyzed with the Fisher's Exact Test. The results of the study are summarized as follows. For the hypothesis 1 (There would be a difference in $SaO_2$, heart rate, and respiration rate before and after suctioning between the two suctioning methods), the difference in $SaO_2$ turns out to be statistically significant (P=0.015), but heart rate and respiration rate do not procedure a notable difference (P=0.630). The hypothesis 2 (There would be a difference in rates at which a complication arises after suctioning between the two groups) does not prove to be statistically valid (P=0.246). For the hypothesis 3(There would be a difference in $SaO_2$ recovery time and nursing time between the two groups), the average $SaO_2$ recovery time after suctioning turned out to have somewhat significant difference (P=0.064), however the difference in nursing time taken for the suctioning was not statistically significant (P=0.610). The analyses indicate that the closed endotracheal suctioning is more efficient as compared with the open method, in maintaining pre-suction baseline $SaO_2$ and a rapid recovery of newborn infants. Based on these results we suggust to apply the closed method to newborn infants in the ventilation treatment. We also suggest to extend the investigation to include the comparison of suction cost taking into account the case in which a complication arises after endotracheal suctioning between the two groups.

• 한국사회복지학회:학술대회논문집
• /
• 한국사회복지학회 2003년도 춘계학술대회 자료집
• /
• pp.282-309
• /
• 2003

본 질적 연구는 가정 폭력을 경영하는 것이 남자 청소년의 성정체성, 특별히 남성성에 미치는 영향에 관해 조사한다. 지금까지의 이론적 문헌들은 폭력 가정의 부정적인 남성 모델이 남자 청소년의 성 정체성 형성 과정에서 갈등을 야기한다고 지적하고 나아가 남자 청소년은 종종 남성적 유능감을 입증하기 위안 방편으로 범죄를 저지른다고 제시한다. 이에 본 연구는 가정 폭력을 경험한 남자 청소년들의 범죄가 그들의 남성성과 연관이 있을 것이라는 가정 하에 남자 청소년들이 어떻게 가정폭력을 경험 하는지, 그 경험이 어떻게 그들의 성정체성 형성 과정에 영향을 미치는지, 그들의 남성성이 어떻게 범죄와 연관되는지에 관해 연구했다. 본 연구는 미국 미네소타 주의 안 청소년 교정 기관에 입소했던 남자 범죄 청소년 12명에 대해 행해진 최소 3회 이상의 인종학적 심층 면접 자료, 주당 1-2회 참여 관찰 후의 현장 기록, 그리고 교정기관의 공식 문서로 구성된 2차 자료를 사용했다. 본 연구를 위한 자료 분석은 열린 부호화, 표를 이용한 자료 축소, 주제별 분석을 위한 재부호화, 주요 범주와 하위 범주들의 발견, 표를 이용한 자료 재축소화, 그리고 집단 간과 집단 내 유사점과 차이점 발견의 순서로 진행되었다. 이러한 분석은 아동기 가정 폭력 경험이 사춘기 동안의 성정체성 형성 과정에 영향을 미칠 수 있음을 보여 주었다. 본 연구 결과에 따르면, 가정 폭력에 노출된 남자 범죄 청소년은 폭력 가정에서 무기력감을 경험했고 폭력의 피해자로서 억압된 어머니와 애착 관계를 형성했다. 다음으로 가정 폭력물 경험한 남자 범죄 청소년과 가정 폭력을 경험하지 않은 남자 범죄 청소년은 전반적인 성정체성의 표현에 있어 공통점이 많았음에도 불구하고 가정 폭력을 경험한 남자 범죄 청소년의 어머니에 대한 애착은 관계적 성정체성의 형성과 연관되어 있었다. 마지막으로, 가정 폭력을 경험한 남자 범죄 청소년은 그들의 관계적 성정체성에도 불구하고, 기정 폭력을 경험하지 않은 남자 범죄 청소년처럼 남성적 유능감을 보여 주기 위해 폭력과 범죄에 의존하는 경향이 있었다.

• 천문학회보
• /
• 제39권2호
• /
• pp.90-90
• /
• 2014

The Immersion Grating Infrared Spectrometer (IGRINS) is the first astronomical spectrograph that uses a silicon immersion grating as its dispersive element. IGRINS fully covers the H and K band atmospheric transmission windows in a single exposure. It is a compact high-resolution cross-dispersion spectrometer whose resolving power R is 40,000. An individual volume phase holographic grating serves as a secondary dispersing element for each of the H and K spectrograph arms. On the 2.7m Harlan J. Smith telescope at the McDonald Observatory, the slit size is $1^{{\prime}{\prime}}{\times}15^{{\prime}{\prime}}$. IGRINS has a plate scale of 0.27" pixel-1 on a $2048{\times}2048$ pixel Teledyne Scientific & Imaging HAWAII-2RG detector with a SIDECAR ASIC cryogenic controller. The instrument includes four subsystems; a calibration unit, an input relay optics module, a slit-viewing camera, and nearly identical H and K spectrograph modules. The use of a silicon immersion grating and a compact white pupil design allows the spectrograph collimated beam size to be 25mm, which permits the entire cryogenic system to be contained in a moderately sized ($0.96m{\times}0.6m{\times}0.38m$) rectangular Dewar. The fabrication and assembly of the optical and mechanical components were completed in 2013. From January to July of this year, we completed the system optical alignment and carried out commissioning observations on three runs to improve the efficiency of the instrument software and hardware. We describe the major design characteristics of the instrument including the system requirements and the technical strategy to meet them. We also present the instrumental performance test results derived from the commissioning runs at the McDonald Observatory.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.107-108
• /
• 2008

The spectacular development of AMLCDs, been made possible by a-Si:H technology, still faces two major drawbacks due to the intrinsic structure of a-Si:H, namely a low mobility and most important a shift of the transfer characteristics of the TFTs when submitted to bias stress. This has lead to strong research in the crystallization of a-Si:H films by laser and furnace annealing to produce polycrystalline silicon TFTs. While these devices show improved mobility and stability, they suffer from uniformity over large areas and increased cost. In the last decade we have focused on microcrystalline silicon (${\mu}c$-Si:H) for bottom gate TFTs, which can hopefully meet all the requirements for mass production of large area AMOLED displays [1,2]. In this presentation we will focus on the transfer of a deposition process based on the use of $SiF_4$-Ar-$H_2$ mixtures from a small area research laboratory reactor into an industrial gen 1 AKT reactor. We will first discuss on the optimization of the process conditions leading to fully crystallized films without any amorphous incubation layer, suitable for bottom gate TFTS, as well as on the use of plasma diagnostics to increase the deposition rate up to 0.5 nm/s [3]. The use of silicon nanocrystals appears as an elegant way to circumvent the opposite requirements of a high deposition rate and a fully crystallized interface [4]. The optimized process conditions are transferred to large area substrates in an industrial environment, on which some process adjustment was required to reproduce the material properties achieved in the laboratory scale reactor. For optimized process conditions, the homogeneity of the optical and electronic properties of the ${\mu}c$-Si:H films deposited on $300{\times}400\;mm$ substrates was checked by a set of complementary techniques. Spectroscopic ellipsometry, Raman spectroscopy, dark conductivity, time resolved microwave conductivity and hydrogen evolution measurements allowed demonstrating an excellent homogeneity in the structure and transport properties of the films. On the basis of these results, optimized process conditions were applied to TFTs, for which both bottom gate and top gate structures were studied aiming to achieve characteristics suitable for driving AMOLED displays. Results on the homogeneity of the TFT characteristics over the large area substrates and stability will be presented, as well as their application as a backplane for an AMOLED display.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1520-1521
• /
• 2008

There are several ways to demonstrate white organic light emitting diodes (OLEDs) for displays and solid state lighting applications. Among these approaches are the stacked three primary or two complementary colors light-emitting layers, multiple-doped emissive layer, and excimer and exciplex emission [1-10]. We report on white phosphorescent excimer devices by using two light emitting materials based on platinum complexes. These devices showed a peak EQE of 15.7%, with an EQE of 14.5% (17 lm/W) at $500\;cd/m^2$, and a noticeable improvement in both the CIE coordinates (0.381, 0.401) and CRI (81). Devices with the structure ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 12% FPt (10 nm) /26 mCPy: 2% Pt-4 (15 nm)/BCP (40 nm)/CsF/Al [device 1], ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4 (15 nm)/26 mCPy: 12% FPt (10 nm)/BCP (40 nm)/CsF/Al [device 2], and ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4: 12% FPt (25 nm)/BCP (40 nm)/CsF/Al [device 3] were fabricated. In these cases, the emissive layer was either the double-layer of 26 mCPy:12% FPt and 15 nm 26 mCPy: 2% Pt-4, or the single layer of 26mCPy with simultaneous doping of Pt-4 and FPt. Device characterization indicates that the CIE coordinates/CRI of device 2 were (0.341, 0.394)/75, (0.295, 0.365)/70 at 5 V and 7 V, respectively. Significant change in EL spectra with the drive voltage was observed for device 2 indicating a shift in the carrier recombination zone, while relatively stable EL spectra was observed for device 1. This indicates a better charge trapping in Pt-4 doped layers [10]. On the other hand, device 3 having a single light-emitting layer (doped simultaneously) emitted a board spectrum combining emission from the Pt-4 monomer and FPt excimer. Moreover, excellent color stability independent of the drive voltage was observed in this case. The CIE coordinates/CRI at 4 V ($40\;cd/m^2$) and 7 V ($7100\;cd/m^2$) were (0.441, 0.421)/83 and (0.440, 0.427)/81, respectively. A balance in the EL spectra can be further obtained by lowering the doping ratio of FPt. In this regard, devices with FPt concentration of 8% (denoted as device 4) were fabricated and characterized. A shift in the CIE coordinates of device 4 from (0.441, 0.421) to (0.382, 0.401) was observed due to an increase in the emission intensity ratio of Pt-4 monomer to FPt excimer. It is worth noting that the CRI values remained above 80 for such device structure. Moreover, a noticeable stability in the EL spectra with respect to changing bias voltage was measured indicating a uniform region for exciton formation. A summary of device characteristics for all cases discussed above is shown in table 1. The forward light output in each case is approximately $500\;cd/m^2$. Other parameters listed are driving voltage (Bias), current density (J), external quantum efficiency (EQE), power efficiency (P.E.), luminous efficiency (cd/A), and CIE coordinates. To conclude, a highly efficient white phosphorescent excimer-based OLEDs made with two light-emitting platinum complexes and having a simple structure showed improved EL characteristics and color properties. The EQE of these devices at $500\;cd/m^2$ is 14.5% with a corresponding power efficiency of 17 lm/W, CIE coordinates of (0.382, 0.401), and CRI of 81.

• 대한간호학회지
• /
• 제24권4호
• /
• pp.623-634
• /
• 1994

Although the average menopausal age has not changed, women's life span has increased. Today's women live longer after their menopause than those in the past, and this calls for attention in both nursing and medical fields. Many studies have revealed how women reacted to menopause and suffered from it. But they did not discriminate the menopausal meaning and effects from the climacteric phenomena. So, this author tried to clarify what menopause itself meant to the climacteric women, by means of grounded theory methodology. The interviewees were 21 women, whose ages were between 46 and 60 years. They were selected by theoretical sampling technique, and the author tried to include all levels of important variables such as age, educational background, religion and job. Data were collected by the author through in -depth interviews and observations in July, 1994. The interviews were mostly done in the homes of the subjects, or in some cases at the author's office or in a hospital. Interviews took from 30 minutes to 2 hours. Interviews were tape recorded and transcribed later by a research assistant. Data were analyzed as gathered, by the constant comparative method proposed by Strauss and Corbin. Eleven concepts were discovered from the data, and they were grouped under six higher order categories. These six categories were "to give menopause a meaning", "to experience value change", "to have self-help strategies", "to have no strategies", "to live a life worth living", "to have a sense of powerlessness" Among these "to experionce value change" was . selected as the core category. Five major categories were systematically integrated around the core category. Women's adaptation to menopause was defined as proceeding as follows : Most women felt relief and sorrow at the same time when they faced menopause, and some only sorrow or agony. Then, they consulted with others about menopausal symptoms, or tried to think of them by themselves. Finally, they gave menopause a meaning, which was that menopause and its symptoms were natural phenomena. But menopause made women reflect on them-selves and their past lives. As they reflected on themselves, their value on life began to change. As their value changed, some women seeked self help strategies. Those self help strategies were what they had learned from collegues, professionals or mass media. The quality of their lives depended on whether they practiced self help strategies or not. Three types of lives were found. Twelve women enjoyed a life worth living, and practiced the self help strategies, because they accepted menopause a chance to change. They were characterized by a high educational level, having a professional job and a sincere faith in God. Seven women were living as usual, because they did not have the necessity to change. They were high school graduates and house wives. Two women recognized menopause a chance to change, but they did not try self help strategies. Their characteristic was low educational level. Those who did not try self help strategies complained of powerlessness to varying degrees. The educational background, full-time jobs and faith helped women adapt to menopause positively. But social support was not helpful to women's adaptation to menepause. Three hypotheses were derived from the analysis. (1) The higher the educational level, the more theneed to change. (2) Women with higher educational background will practice self help strategies more than those with lower edcational background. (3) The more women practice self help strategies, the worthier lives they will live. Suggestions for further studies are as follows. (1) Studies to test hypotheses are needed. (2) A study to find the relationship between the degree of practicing self help strategies and locus of control. (3) Spiritual approaches would better be applied to help menopausal women. (4) Education through mass media should be given mere frequently.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.