• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.73-79
• /
• 2015

Recently, BIM proliferates at high speeds so that BIM planning is trying to be used in various kinds of engineering. However, when using different software during design phase and construction phase, the problem of mutual compatibility is coming out. Even the BIM technology has been used or the practical applicability has been made into result, it would be fair to say that BIM has limitations in the visual level. In this research, it is meaningless to obtain the BIM result as the primary purpose. As the usefulness of it is judged incomplete, we committed to master the trend and problems of terrain spatial information systems and BIM. Furthermore, the plan of building the BIM in the civil field, especially the civil-BIM based on the technology ofterrain spatial information has been presented. It can be judged through this research that the high-capacity DB of BIM occurred during the whole process may cause poor performance of the following stage the structure system which connects the terrain spatial information and civil-BIM. In order to manage the optimal full cycle, the spatial analysis technology of the stages after choosing the DB has been described.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.83-93
• /
• 2008

The topographic effect is one of the most important component in the solution of the geodetic boundary value problem (geodetic BVP). Therefore, topographic effect should be considered properly for developing the precise geoid model, especially for the area where contains many mountains like Korea. The selection of gravity reduction method in the context of the precise geoid determination depends on the magnitude of its indirect effect, the smoothness and magnitude of the reduced gravity anomalies, and their related geophysical interpretation. In this study, Korean digital elevation model with 100m resolution was constructed and topographic effect was calculated by three reduction methods as like Helmert condensation method and RTM method and Airy-isostatic reduction method. Through the analysis of computation results, we can find that RTM reduction method is the best optimal method and the results shows that gravity anomaly and indirect effect of geoidal height are $0.660{\pm}13.009mGal$, $-0.004{\pm}0.131m$ respectively and it is the most gentle slow of the three methods. Through this study, it was found that the RTM method is better suitable for calculating topographic effect precisely in context of precise geoid determination in Korea than other reduction methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.412-419
• /
• 1988

Cold-induced sterility is a problem of rice (Oryza sativa L.) production in temperate regions and high elevation tropics. The present study was conducted to measure combining ability, determine character associations. and to evaluate effectiveness of F$_2$selection for tolerance to this type of cold injury. The F$_1$, F$_2$, F$_3$ and reciprocal backcross F$_1$ populations of a nine-parent diallel were grown at Davis, California. a relatively cool location for rice. Additive genetic variance was predominant but some non -additive genetic variance existed for cold tolerance. Good general combining ability (GCA) was generally associated with the cold tolerant parents, 'M-201', and 'L-201', and poor GCA with the most susceptible parent. 7703008. Sterility was positively correlated with late heading. negatively with mature plant height. and negatively with spikelet number. Of the three agronomic characters, heading date had the greatest influence on sterility. Selection of F$_2$'s in seven crosses involving M-101, the most cold-tolerant parent, was effective for increasing cold tolerance. Realized heritability estimates for cold tolerance averaged 0.53, and observed selection response for cold-induced sterility averaged -9.4 percentage points.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2017

Recently, increasing cases of ground subsidence in the urban area has become social issue, and related bill has been passed. Ground subsidence occurs through complex combination of various factors, and numerical analysis of this problem is limited thereby. This is why verification of ground subsidence mechanism has been conducted through physical modelling. Previous researches has been focused on modelling ground subsidence caused by utility pipe defects, and there has been insufficient physical modelling study on ground subsidence caused by various reasons such as groundwater flow and excavation activity. Also, most previous physical modelling studies were performed in 1g condition, which cannot take the in-situ stress condition into the evaluation of the ground subsidence mechanism. Therefore, in this study, physical modelling techniques to simulate various conditions is discussed by studying the previous researches on the ground subsidence mechanism through physical modelling. Also, centrifuge modelling test is suggested in this study as the technique to perform more reliable evaluation of ground subsidence mechanism. Lastly, this study suggests to apply the techniques used in the evaluation of ground subsidence mechanism into Ground Stability Assessment.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2020

In 2005, Urban railway seismic design was introduced in Rep. Of Korea, and many studies on seismic performance evaluation and reinforcement methods were conducted. In accordance with the Enforcement Decree of the Earthquake Disaster Countermeasures Act issued in March 2009, during April 2010 to October 2013, some of local governments established detailed evaluation and reinforcement measures for seismic performance of the urban railway underground structure. Afterwards, the seismic performance reinforcement of the existing urban railway structures was conducted for the sections that a long period of used until the end of 2018, and the reinforcement works are carried out by various methods using the previously studied methods. However, various reinforcing materials and construction methods using have been studied, but the classification research on the construction methods currently applied to reinforcement construction of urban railways is insufficient. The purpose of study is to analysis the cases currently applied to seismic reinforcement construction and to show the characteristics of each construction method, the reasons for its application and problems.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.128-137
• /
• 2010

The purpose of this study is to set up the analytical method of new persistent organic pollutants (POPs) such as chlordecone, endosulfan, ${\alpha}$-HCH, ${\beta}$-HCH, ${\gamma}$-HCH. The analytical methods for these compounds listed as new POPs by the Stockholm Convention need to be newly established. Therefore, we proposed the analytical method for 5 organic chlorinated pesticides (OCPs) and then applied the analytical method to environmental samples. To do this, the pre-treatment such as florisil and activated carbon cleanup process in the Korean official method for classic POPs had been reviewed. All of compounds except chlordecone were pre-treated simultaneously with reviewed cleanup process and detected by GC/MS and HRGC/HRMS respectively. There is a problem that chlordecone could not get a high sensitivity by GC analysis, but in this study GC/MS method was proposed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.255-267
• /
• 2020

Under SLD conditions, due to the large size of droplets, physical phenomena such as wall-droplet interaction and deformation have a significant effect on the icing process. Accordingly, many studies have been conducted in order to computationally simulate SLD effects. As one of the efforts, post-processing method have been proposed to describe wall-droplet interaction effect, which modified collection efficiency using Wright model. However, since the model doesn't properly consider the wall condition, it still overestimated collection efficiency and impingement limit. To solve this problem, impingement areas were divided into 3 different regions, and the post-processing method was introduced with the new wall-droplet interaction model developed based on Bai and Gosman rebound model. In order to consider the effect of deformation, the most suitable model was selected by comparing the deformation models used in the various icing codes. As a result, the modified post-processing method showed improved accuracy in predicting the impingement limits and collection efficiency by further estimating mass flux loss due to rebound, and it was observed that the result was the closest to the experimental data when the deformation effect was included by using Wiegand model.

• Journal of Elementary Mathematics Education in Korea
• /
• v.19 no.4
• /
• pp.545-561
• /
• 2015

The purpose of this study was to analysis how the elements of character are reflected in the 3rd and 4th grade elementary mathematics textbooks based on the 2009 revised curriculum. This study focused on the elements of character in the 3rd and 4th grade mathematics textbooks. The researchers analyzed the elements of character in the students' mathematics textbooks and teacher's guide books. In particular, they analyzed how those elements of character are reflected in those books. Findings of this study are as follows. First of all, the elements of character were founded in the most of units on the 3rd and 4th grade mathematics textbooks, but they were biased to the specific elements of character. Second, the resources using related with character vary in the textbooks. As methods of character education, connections of elements of character with mathematical concepts, broader view of the world, or problem solving are appeared. From the results of the research, we suggest the followings. We need to set the teacher's roles in character education. Mathematics textbooks should include various elements of character for effective character education. In addition to development of quality materials for character education in mathematics education, teacher education programs should include character education in mathematics education.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.179-198
• /
• 2011

The understanding of mathematical concepts should be backed up on a constant basis in oder to grow problem-solving skills which is one of the ultimate goals of math education. The purpose of the study was to provide readers with the information which could be considered valuably for the math educators trying both to prevent mathematical misconceptions and to develop curricular program by estimating the actual conditions and developing backgrounds of the mathematical misconceptions held by the gifted education learners. Accordingly, this study, as the first step, theoretically examined the meaning and the developing background of mathematical misconception. As the second step, this study examined the actual conditions of mathematical misconceptions held by the participant students who were enrolled in the CTY(Center for Talented Youth) program run by a university. The results showed that the percentage of the correct statements made by participant students is only 35%. The results also showed that most of the participant students belonged either to the level 2 requiring students to distinguish examples from non-examples of the mathematical concepts or the level 3 requiring students to recognize and describe the common nature of the mathematical concepts with their own expressions based on the four-level of concept formulation. The causes could be traced to the presentation of limited example, wrong preconcept, the imbalance of conceptual definition and conceptual image. Based on the estimation, this study summarized a general plan preventing the mathematical misconceptions in a math classroom.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.165-176
• /
• 2018

A demand for user's participation in the designing process, which is called the participation design, is increasing with social change. Practically, however, there is lack of researches on the improvement of the problem in actual design development and participation design effect. In order to understand the field-based participation design effect in view of user's change of awareness on participation design, this study carried out a survey on the change of awareness through a design workshop in which all stakeholders have participated on the subject of agricultural direct sales facilities as a part of participation design programs. Many references were reviewed first to understand the participation design principles and their current research trend. Next, the questionnaire was developed using an effectiveness verification model for an effective analysis. A design workshop as one of the participation design programs was organized and applied for the field response. In order to analyze the effect, the survey on participants' change of awareness was carried out before and after the program. The survey questionnaires were about motivation, knowledge, recognition, function, and participation and asked the design study graduates. The participation design effect was supplemented by additional open questions. As a consequence, the participants in the participation design program showed the noticeable effect in knowledge and function about the agricultural direct sales facilities. It was found that they were also highly satisfied with the participation design result and they recognized an importance of collaboration. This study also showed that a sufficient time schedule considering agricultural village life should be given for a smooth operation of the program and also a working environment is necessary for designing work.