• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.245-254
• /
• 2006

While orofacial pain or various dental factors are generally considered as the primary cause of unilateral chewing tendency, there exist several studies indicating that dental factors did not affect the preferred chewing side. The aim of this study was to examine difference of occlusal scheme between the subjects with and without chewing side preference. The difference between the chewing and non-chewing sides in the unilateral chewing group was investigated as well. Computerized, T-Scan II system was used for occlusal analysis. 20 subjects for the unilateral chewing group (mean age of $25.25{\pm}2.84$ years) and 20 subjects for the bilateral chewing group (mean age of $27.00{\pm}5.07$ years) were selected by a questionnaire on presence or absence of chewing side preference and those with occlusal problem or pain and/or dysfunction of jaw were excluded. T-Scan recordings were obtained during maximum intercuspation and excursion movement. The number of contact points, relative occlusal force ratio between right and left sides, tooth sliding area and elapsed time throughout the maximum intercuspation were calculated. Elapsed time for excursion was also investigated. The results of this study shows that the unilateral chewing group had the smaller average tooth contact areas compared with those of the bilateral group (p<0.005). In the unilateral chewing group, the contact areas of non-chewing side are smaller than those of chewing side (p<0.005). The contact areas on their preferred sides were not significantly different with those of right or left side of the subjects without chewing side preference. There was no significant difference in the elapsed time during maximum intercuspation and lateral excursion, the sliding areas and relative of right-to-left occlusal force ratio between the two groups. From the results of this study, it is likely that individuals prefer chewing on the side with more contact areas for efficient chewing.

• Journal of agricultural medicine and community health
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2013

Objectives: This study is to investigate the prevalence and related factors of metabolic syndrome among Korean adults aged 20 years and above. Methods: From the database of the $5^{th}$ Korea National Health and Nutrition Examination Survey (KNHANES V) conducted in 2010, data of 5,670 adults who responded to all the questionnaires of health interview and had metabolic syndrome in the health examination were included in this analysis. SAS 9.2 was used for statistical analysis with complex sample survey modules and commands. Results: The prevalence rate of metabolic syndrome based on the criteria proposed by International Diabetes Federation (IDF) was 18.8%. The prevalence of metabolic syndrome in each group was: 20.7% of women, 43.1% among elderly over 70 years old, 40.6% of the divorced or the separated, 27.6% of recipients of economic support from the government, 23.6% of people who had alcohol dependency problem, and 43.7% of overweight or obese adults. Independent risk factors based on the multiple logistic regression analysis revealed that prevalence of metabolic syndrome was associated with female (odds ratio 1.59 [95% confidence interval 1.20-2.11]), age (50s 3.95 [2.11-7.37], 60s 5.62 [2.98-10.61], 70s 10.56 [5.25-21.25]), high school education (0.52 [0.37-0.74]), clerk occupation (2.14 [1.27-3.60]), divorced marital status (1.72 [1.15-2.59]), alcohol dependency (1.86 [1.16-2.98]), higher BMI (14.08 [10.60-18.70]). Conclusions: The metabolic syndrome is prevalent among Korean adult population according to IDF criteria. Several demographic characteristics and potentially modifiable factors are associated with metabolic syndrome. Identification of this high-risk group and management of these modifiable factors are warranted to reduce the prevalence of metabolic syndrome.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.2
• /
• pp.182-206
• /
• 2003

Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

• The Korean Journal of Mycology
• /
• v.34 no.2
• /
• pp.73-78
• /
• 2006

Attempts were made to investigate the physiological and genetic changes when two different shiitake (Lentinula edodes) strains are mixed. Mycelial growth of KFRI 180 strain and KFRI 1 strain were investigated 82 mm and 80 mm, respectively. Concerning the weight loss percentage of medium, KFRI 1 strain decreased 2.4% and KFRI 180 strain 1.6%. Plug-shaped spawn had no-problem to incubate and there were no differences among the ratios of mixture. Also, conditions of plug-shaped spawns were similar, When the isolated mycelia from plugshaped spawns was incubated again, KFRI 1 50%-KFRI 180 50% showed decreased growth of mycelia compared with other treatments. The same results were obtained from test tubes filled with sawdust. When surface of spawn bottles were observed, KFRI 1 50%-KFRI 180 50% showed spots, but other treatments were not different from KFRI 1 and KFRI 180. Test was made to confirm the strains by confrontation culture. The mixture of two strains was proved to be KFRI 1 regardless the ratios of mixture. However, by the RAPD primer analysis, when KFRI 1 was mixed with KFRI 180, KFRI 180 was stronger. Thus, the confrontation line on PDA was different from the bands analysis by primers. Attempts were made whether the fruit-bodies were made at the generating condition of spawn bottles. The results were that KFRI 1 100%, KFRI 1 90%-KFRI 180 10%, KFRI 1 80%-KFRI 180 20%, KFRI 1 50%-KFRI 180 50% treatment showed fruit-body formation. The shape of fruit-body was deformed, but the gill was made normally.

• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.11-24
• /
• 1976

This study was a part of large scale of a prospective study on attitudes of professional students in medicine, nursing and teaching toward population related issues in Korea. The study was first conducted in May 1974 and then in May 1975 for the 1974 class cohot using a questionaire consisted of attitude scales and other items developed by Lee. The purpose of stuay was twohold, namely, to determine the difference in students among specializations on one hand and between the first and second years in the 1974 class cohot regarding tile subject matter. A one-way analysis of variance was used for attitude scale, and absolute and relative frequency were computed for the analysis of non-attitude scale items by employing Fishers' Ratio and Duncan's multiple range test at 5% level and chi square test at 5% level as significance tests. The hypothesis 'students in health profession are more likely to have positive attitudes toward population related issues progressively as class year advances than students in teaching profession' was tested and the following results were obtained: 1) Nursing students were more likely to display favarable attitudes toward family planning than medical or teaching students although the class cohot showed slightly negative improvement in the second year. Medical and teaching students apperaed to have slightly improved attitudes in the second year. 2) Respondents in general perceived national family planning program as a means of population control and this tendency was more true among nursing students as the class year advances than two other professional groups of students. Students in teaching profession appeared to perceive it more as a means to improve individual family welfare while health students were likely to see as to improve maternal and child health. This tendency was progressively improved as the class year advanced. 3) The majority of students regardless of their respective specializations believed that family planning program should be directed toward the improvement of individual family welfare. No progressive changes in the class cohot were observed. 4) About the plan to use contraceptives in future, no singnificant differences were observes among different specializations nor in different class years. However, the majority was confirmed to have a plan to use contracepives in future. An increasing proportion of the undecided category was observed, as class year advanced among health students. 5) Students in health profession were found to be more favorable about 'more leisure opportunities' as motive for limiting number of children whereas education students indicated the reasons as 'facilitate ambitions' and 'economic base' The progressive changes toward positive direction in both groups were observed as the class years advanced. 6) Attitudes toward induced abortions of the health students were observed to be positively related to class years while an inverse relationship was found in teaching students who showed much less favor in the subject matter than health students. This phenomenon may be due to the different exposure to learning environments unique to respective specializations. 7) Health students were found to have more favorable attitudes toward population education in general than the teaching students. The teaching students appeared to have changed more to the negative direction when they became the second year while no such development was observed in health students. The teaching students seemed to hold a very conservative position with regard to sex education in schools. 8) About the equality of sexes, the nursing group was found to be most favorable while the reverse was true in the teaching group. A change in the negative direction as the class year advanced was found in the teaching group. 9) About questions related to fertility values-the 10 percent of respondents regardless of specialization indicated that they would maintain their single status in future, however no change was observed in the second year. The desired number of children was found to be two by the majority of students in nursing, medicine and teaching in order of high proportion. No changes in a different class year were observed. The childless marriage was seen by nursing students as a problem more than other students, but a slight change in positive direction was found when the nursing students became the second year. In summing, as data supported in the above, students in health profession demonstrated more favorable attitudes toward population related issues than the teaching students and this tendency became more apparent in the second year. It was noticed that health students were more conscious about the health aspect of population and family planning program while the teaching students gave more attention to the socioeconomic aspect. The sex variable seemed to have operated in the item related to the equality of sexes. In conclusion, as data presented in the above, the hypothesis of this study was accepted except in the few items. It should be noted that the limitation of this study is the short duration of the observation in measuring the possible attitude changes. It should include curriculum analysis for the respective specializations in order to indentify the area of curriculum impact on students in future study.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.6-13
• /
• 2018

Utilizing the heat of cooling water discharge of coal-fired power plant, pipeline investment costs for businesses that supply heat to agricultural facilities near power plants increase in proportion to installation distance. On one hand, the distance from the power plant is a factor that brings difficulties to secure economic efficiency. On the other, if the installation distance is short, there is a problem of securing the heating demands, facility houses, which causes economical efficiency to suffer. In this study, the economic efficiency of 1km length of standard heat pipeline was evaluated. The sensitivity of the heat pipe to the new length variation was analyzed at the level of government subsidy, amount of heating demand and the incremental rate of pipeline with additional government subsidy. As a result of the analysis, it was estimated that NPV 131 million won and IRR 15.73%. The sensitivity analysis showed that NPV was negative when the length of heat pipe facility exceeded 2.6 km. If the government supports 50% of the initial investment, the efficiency is secured within the estimated length of 5.3 km, and if it supports 80%, the length increases within 11.4 km. If the heat demand is reduced to less than 62% at the new length of the standard heat pipe, it is expected economic efficiency is not obtained. If the ratio of government subsidies to initial investment increases, the elasticity of the new bloc will increase, and the fixed investment, which is the cost of capital investment for one unit of heating demand, will decrease. This would result in a reduction in the cost of production per unit, and it would be possible to supply heat at a cheaper price level to the facility farming. Government subsidies will result in the increased economic availability of hot plumbing facilities and additional efficiencies due to increased demand. The greater government subsidies to initial investment, the less farms cost due to the decrease in the price per unit. The results of the study are significant in terms of the economic evaluation of the effectiveness of the government subsidy for the thermal power plant heat utilization project. The implication can be applied to any related pilot to come.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.867-873
• /
• 2019

As of August 2019, there were 3,823 vessels under 30 tons that could be included in the category of small vessels; these account for 42.5 % of the 9,001 registered vessels in Korea. The problem is that many small vessel seafarers face many problems such as an board communication disconnection, difficulties in communication in maritime license interviews, or education related to maritime training using a large number of nonstandard terms, which are derived from foreign languages; this is leading to a decline the job skills of small vessel seafarers. Therefore, in this study, we closely analyzed the terminology of small vessel seafarers and proposed a standardization plan. In the terminology analysis, the preliminary terms of the maritime license interview and the high-frequency terms of the small vessel educational textbook were identified and the corresponding nonstandard terms were examined. Based on a survey, an expert meeting was held and incorrect Japanese notation, English notation, and the standard language for key terms were presented to analyze which questionnaire was most familiar. The ratio of the use of standard words is relatively high in the case of nautical terms, however, the wrong Japanese notation is used more for engine terms; the analysis results by age and tonnage also generally use the Japanese notation and the use frequency of English notation was determined to be low. Based on this, short- and long-term plans for the use of standard words by small vessel seafarers were proposed, including the production of a standard language dictionary for terms used by these seafarers, a promotion of the importance of using standard terms, active education through educational institutions, and the systematic preparation and implementation of Korean-language education for foreign sailors.

• 대한공업교육학회지
• /
• v.39 no.1
• /
• pp.23-46
• /
• 2014

The purpose of this study was to analyze the textbooks of career counseling which are written or translated in Korean so as to understand the usefulness and limitation on the usage of career counseling textbooks. Research questions are as follows: 1) what contents are included in textbooks of career counseling? 2) what are the differences of content rates among textbooks of career counseling? 10 textbooks of career counseling were analysed(6 textbooks: introduction to career counseling, 4 textbooks: focused on career counseling skills and techniques) based on the competency components for career counseling professionals presented by Yoo(2009). Results indicated that 1) 6 textbooks of introduction to career counseling have the most content of 'category1: theories and concepts related to career counseling'. In comparison, 4 textbooks focused on career counseling skills and techniques have the most content of 'category4: career counseling competency'. 2) Based on the unit of analysis chapter, the highest rates are 'category4: career counseling competency(33.33%)' and 'category1: theories and concepts related to career counseling(28.15%)'. 3) It is hard to find the contents related to the knowledge and skills of individual and group counseling(category 2), the competencies of network, problem solving, peer counselor feedback, administration, ethic(category 8,9,10,11,13), the growth and self-management as professionals(category 12,14).

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.15-22
• /
• 2002

Transportation project appraisal should be precise in order to increase the social welfare and efficiency, and it has been evaluated by only a single criterion analysis such as benefit/cost analysis. However, this method cannot assess some qualitative items, and cannot get a proper solution for the clash of interests among various groups. Therefore, the multi-criteria analysis, which can control these problems, is needed, and then Saaty has developed one of these methods, AHP(Analytic Hierarchy Process) method. In AHP, the project is evaluated through weighted score of the criteria and the alternatives, which is surveyed by a questionnaire of specialists. It is based on some strict suppositions such as reciprocal comparison, homogeneity, expectation, independence relationship between multi-criteria, but supposing that each criterion has independence relation with others is too difficult in two reasons. First, in real situation, there cannot be perfect independence relationship between standards. Second, individuals, even though they are specialists of that area, do not feel the degree of independence relation as same as others. This paper develops a modified AHP method for solving this dependence relationship between multi-criteria. First of all. in this method, the degree of dependence relationship between multi-criteria that the specialist feels is surveyed and included to the weighted score of multi-criteria This study supposes three methods to implement this idea. The first model products the degree of dependence relationship in the first step for calculating the weighted score, and the others adjust the result of weighted score from the basic AHP method to the dependence relationship. One of the second methods distributes the cross weighted score to each standard by constant ratio, and the other splits them using Fuzzy measure such as Bel and Pl. Finally, in order to validate these methods, this paper applies them to evaluate the alternatives which can control public resentments against Korean rail path in a city area.

• Korean Journal of Social Welfare Studies
• /
• v.48 no.3
• /
• pp.171-208
• /
• 2017

The purpose of this study is to classify the underlying and parsimonious types of child maltreatment and examine whether the effects of risk factors on child maltreatment recurrence differ by type of maltreatment. We utilized the multiyear national administrative data from the National Child Maltreatment Information System collected by Child Protection Agency in Korea. Of 26,921 child maltreatment victims reported and substantiated on or after January 1, 2012, 1,447 children who had recurrence of child maltreatment until December 31, 2015 were selected as maltreatment recurrence group and 4,580 children who had not experienced maltreatment since first substantiation were assigned as maltreatment non-recurrence group. Latent class analysis(LCA) and latent transition analysis(LTA) were used to group children with similar maltreatment subtypes into discrete classes of child maltreatment recurrence. Logistic regression is employed to examine the association between the child maltreatment predominant types and risk factors for recurrence. Results of LCA and LTA showed four latent classes representing predominant type of child maltreatment: 'physical abuse predominant type', 'emotional abuse predominant type', 'sexual abuse predominant type', and 'neglect type'. Significant differences in the effect of risk factors among latent classes were found in child's age and gender, perpetrator's gender, family poverty, biological parent as the perpetrator, domestic violence toward partner, perpetrator's alcoholic problem, insufficient parenting skills, and out-of-home care service, Based on these findings, results suggested how the typology can be used to guide decision about who to target in prevention and intervention programs, and which features of risk factors to target. Practice and policy implications as well as further research tasks were discussed in the lights of searching for useful and important strategies to prevent recurrence of child maltreatment.