• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.61-71
• /
• 2003

Existent DDHV draws and is calculating K coefficient. D coefficient from sum of traffic volume two-directions time. There is difference of design order and actuality order, error of DDHV estimation value, problem of irregular change etc. of DDHV thereby. In this study, among traffic volume of each other independent two direction(going up, going down), decide design target order in the directional traffic volume, presented way(way) applying without separating K coefficient and D coefficient at the same time. The result were analysis about national highway permanent count point 360 points 30 orders by existing DDHV estimation value method(separation plan) analysis wave and following variation appear. - design order and actuality order are collision at 357 agencies(99.2%) - actuality order special quality : Measuring efficiency of average 80 orders, maximum 1,027 order, minimum 2 orders - error distribution of design order and actuality order : inside 10 hours is(30$\pm$10hour) 106 points(29.4%), 254 points(70.6%) more than 30 orders and $\pm$10 orders error occurrence be - DDHV estimation value : Average 8.4%, maximum 46.7% The other side, average 50 orders. error improvement effect of DDHV 8.4% was analysed that is at design hourly volume computation by inseparability method in case of AADT premises correct thing because inseparability plan agrees actuality order at whole agency with design order and measuring efficiency of DDHV estimation value is "0".t;0".uot;.

• Tribology and Lubricants
• /
• v.36 no.2
• /
• pp.105-115
• /
• 2020

This paper presents a numerical study on the rotordynamic analysis of a dual-spool turbofan engine in the context of blade defect events. The blades of an axial-type aeroengine are typically well aligned during the compressor and turbine stages. However, they are sometimes exposed to damage, partially or entirely, for several operational reasons, such as cracks due to foreign objects, burns from the combustion gas, and corrosion due to oxygen in the air. Herein, we designed a dual-spool rotor using the commercial 3D modeling software CATIA to simulate blade defects in the turbofan engine. We utilized the rotordynamic parameters to create two finite element Euler-Bernoulli beam models connected by means of an inter-rotor bearing. We then applied the unbalanced forces induced by the mass eccentricities of the blades to the following selected scenarios: 1) fully balanced, 2) crack in the low-pressure compressor (LPC) and high pressure compressor (HPC), 3) burn on the high-pressure turbine (HPT) and low pressure compressor, 4) corrosion of the LPC, and 5) corrosion of the HPC. Additionally, we obtained the transient and steady-state responses of the overall rotor nodes using the Runge-Kutta numerical integration method, and employed model reduction techniques such as component mode synthesis to enhance the computational efficiency of the process. The simulation results indicate that the high-vibration status of the rotor commences beyond 10,000 rpm, which is identified as the first critical speed of the lower speed rotor. Moreover, we monitored the unbalanced stages near the inter-rotor bearing, which prominently influences the overall rotordynamic status, and the corrosion of the HPC to prevent further instability. The high-speed range operation (>13,000 rpm) coupled with HPC/HPT blade defects possibly presents a rotor-case contact problem that can lead to catastrophic failure.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.97-105
• /
• 2020

Recently, Artificial Neural Network receives attention as a data prediction method. Among these, a Long Shot-term Memory (LSTM) model specialized for time-series data prediction was utilized as a prediction method of hydrological time series data. In this study, the LSTM model was constructed utilizing deep running open source library TensorFlow which provided by Google, to predict inflows of multipurpose dams. We predicted the inflow of the Yongdam Multipurpose Dam which is located in the upper stream of the Geumgang. The hourly flow data of Yongdam Dam from 2006 to 2018 provided by WAMIS was used as the analysis data. Predictive analysis was performed under various of variable condition in order to compare and analyze the prediction accuracy according to four learning parameters of the LSTM model. Root mean square error (RMSE), Mean absolute error (MAE) and Volume error (VE) were calculated and evaluated its accuracy through comparing the predicted and observed inflows. We found that all the models had lower accuracy at high inflow rate and hourly precipitation data (2006~2018) of Yongdam Dam utilized as additional input variables to solve this problem. When the data of rainfall and inflow were utilized together, it was found that the accuracy of the prediction for the high flow rate is improved.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.332-342
• /
• 2015

In this study, to solve the major problem of reverse osmosis (RO) membrane, surface of reverse osmosis membrane was modified by silane-epoxy multi layer. Octyltrimethoxysilane (OcTES) was polymerized to membrane surface via cross-linking by Sol-gel method. n = 8 alkylgroup of OcTES formed the branch structure by self assembly. And for improve fouling resistance of RO membrane, Ether group of ethylene glycol diglycidyl ether (EGDE) was given to improve hydrophilicity of RO membrane surface by ring-opening. To analyze structure of RO membrane surface with FE-TEM and AFM. Membrane surface of the ridge and valley structure and the bridge structure was confirmed due to the multi-layer surface modification of OcTES and EGDE. And through the increase of the roughness, the branch structure was formed well on membrane surface. Through the XPS analysis was identified chemical structure of membrane surface. And confirmed that the hydrophilic surface modification is given to the surface of the film through a Contact angle analysis. In optimization of EGDE surface modification condition, was suitable 0.5 wt% EGDE concentraion and $70^{\circ}C$ ring-opening temperature. In result of fouling resistance test and MFI is SUL-H10, $PA-OcTES_{1.0}$, $PA-OcTES_{1.0}-EGDE_{0.5}$ 68.7, 60.4, 5.4 ($10E-8hr/mL^2$), multi-layer surface modified membrane improved fouling resistance.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.5
• /
• pp.51-70
• /
• 2010

The purpose of this article is twofold; first, investigates the relations between the cyber deviant behaviors and the reasons it causes in details and second discuss the measure to prevent cyber deviant behaviors and its recurrence. The findings of the study are; First, the factors which influence more to the cyber deviant behaviors are subjective norm, social identity, and self-control in a row. Second, identified such factors, anonymity (+), consciousness on public order (+), learning experience on information norms (-), and social identity have influences on the subjective norm that both factors of internet addiction (+) and anonymity (+) have significant impacts on self-control in negative perspectives. In conclusion, to prevent cyber deviant behaviors will provide a lot of opportunities to develop self-reflections and critical thinking and the ethics of accountability, and ability of sympathy. This study suggests the so-called reflexive practice-oriented process of education on Information as a strategic teaching-learning procedure. The process framework consists of four stages including problem identification, risk analysis, self-reflexive, and practice & evaluation that have a spiral structure, repeats a life-cycle.

• Korean Journal of Childcare and Education
• /
• v.10 no.5
• /
• pp.5-23
• /
• 2014

The purpose of this study was to identify factors affecting extra expenses incurred by extracurricular activities, prompted by the problem that the financial burden on households for their children's education and child-care is not showing enough signs of being mitigated, despite increased child-care subsidies from the government. Data for this study was obtained from the 4th Panel Study on Korean Children of Korea Institute of Child Care and Education. The analysis of the study shows that 68.5% of the surveyed children were participating in extracurricular activities and the average number of extracurricular activities they took part in was 2.9. The average extracurricular expenditure was 50.000 won. However, based on the findings of the survey, it was statistically significant to find that the number of extracurricular activities the children participated in and the expenditure the households spent on them varied by area. Variables were inserted in a gradual manner in identifying factors influencing households' expenditure on children's extracurricular activities. The results showed that amongst the variables used, the education level of the mother, the employment status of the mother, the type of the child-care support institution, and the household's place of residence featured prominently, with the place-of-residence factor accounting for most of the reason why a household spent the amount it did. The outcome of the study bears four policy implications: First, there is a need for a specific evaluation of the contents and costs of extracurricular activities and supervision and management of such activities. Second, it is necessary for the central government to provide a specific criteria of necessary expense. Third, throughout the child support agency, the courses and costs of special activities should be monitored regularly. Fourth, there should be extracurricular activity support for underprivileged children.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.181-196
• /
• 2019

Floods can be caused by a variety of factors, and the main cause of floods is the exceeding of urban drainage system or river capacity. In addition, rainfall frequently occurs that causes large watershed runoff. Since the existing methodology of preparing for flood risk map is based on hydraulic and hydrological modeling, it is difficult to analyse for a large area because it takes a long time due to the extensive data collection and complex analysis process. In order to overcome this problem, this study proposes a methodology of mapping for flood vulnerable area that considered the surface runoff mechanism. This makes it possible to reduce the time and effort required to estimate flood vulnerabilities and enable detailed analysis of large areas. The target area is Seoul, and it was confirmed that flood damage is likely to occur near selected vulnerable areas by verifying using 2×2 confusion matrix and ROC curve. By selecting and prioritizing flood vulnerable areas through the surface runoff mechanism proposed in this study, the establishment of systematic disaster prevention measures and efficient budget allocation will be possible.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.61-69
• /
• 2012

Smart Grid is the next-generation intelligent power grid that maximizes energy efficiency with the convergence of IT technologies and the existing power grid. Smart Grid is created solution for standardization and interoperability. Smart Grid industry enables consumers to check power rates in real time for active power consumption. It also enables suppliers to measure their expected power generation load, which stabilizes the operation of the power system. Smart industy was ecolved actively cause Wireless communication is being considered for AMI system and wireless communication using ZigBee sensor has been applied in various industly. In this paper, we proposed efficient addressing scheme for improving the performance of the routing algorithm using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm has wasted address space. Therefore proposing x, y coordinate axes from divide address space of 16 bit to solve this problem. Each node was reduced not only bitwise but also multi hop using the coordinate axes while routing than Cskip algorithm. I compared the performance between the standard and the proposed mechanism through the numerical analysis. Simulation verify performance about decrease averaging multi hop count that compare proposing algorithm and another. The numerical analysis results show that proposed algorithm reduce multi hop than ZigBee distributed address assignment and another.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.361-368
• /
• 2017

Recently, the historical displeasure of celebrities caused a problem that the people were scolded by the people. On the other hand, people's historical consciousness is rising for a series of broadcasts organized by a famous entertainment program. We are now in the idea of our country people like this in history when history will not be left unsaid thing about realism. Inmates because there is a powerful force that is, that media is the 'immersion' players are interested more in the game, it is important to do it. Therefore, the history of games are made based on players to attract attention and interest or historical fact and to make a feature of the game and character.Does not occur to production. So correct history can have a sense of history the players are in fact this study, based on the development called an 'the mythology of the millennium' in 'hq team', manufactured. Choose the game. Scenario is based on thorough historical facts of the game 'the mythology of the millennium' authority order to conduct verification of the historians made it. These production process to appear in the game 'King Gwanggaeto,', 'Geunchogo of Baekje' and 'muyeorwang' design and comparative analysis to the historical facts.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.181-190
• /
• 2014

The underwater acoustic lens system is one of the systems getting high-resolution images on the seafloor by the beam forming method using acoustic lens. The beam forming using acoustic lenses reduces complexity and driving power. When receiving an incoming beam with the acoustic lens array, beam pattern analysis and arrangement problem of the array sensor must be addressed. Introducing SIR (Signal to Interference Ratio), the relationship among sensor interval, beam pattern and image quality would be analyzed. Generally if the sensor interval getting wider, the less effect of the side lobes makes SIR high. If the amplitude of a side lobe is high, SIR is generally getting low. The type of the apodization function changes the width, shape and amplitude of both main lobe and side lobes. Thus an appropriate apodization function can improve SIR. In this paper, SIR is stable at the sensor interval of 13mm with 0-10dB, which is not high relatively. By applying the Chebyshev function, the SIR becomes 80dB over the sensor interval of 37 mm or higher. The Hann and triangular functions demonstrate better SIR when the sensor interval becomes narrower.