• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.459-463
• /
• 1996

The lateral-shearing interferometer specially devised for production line inspection lenses is presented. The interferometer is composed with immersion oil and four prisms whose relative sliding motion provide lateral-shearing and phase-shifting. A special phase-measuring algorithm of a-bucket is adopted to compensate the phase-shifting error caused by the thickness reduction in the immersion oil Three different algorithm for determinating quantitative aberration of aspherical lenses are presented and compared with one another.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.4
• /
• pp.253-264
• /
• 2013

A major difference between high-strength reinforcing steel and conventional steel in concrete is that the service-load steel stress is expected to be greater. Consequently, the service-load steel strains are greater affecting cracking behavior. A parametric study investigating crack widths and patterns in reinforced concrete prisms is presented in order to establish limits to the service-load steel stress and strain. Additionally, based on the results of available flexural tests, crack widths at service load levels were evaluated and found to be within presently accepted limits for highway bridge structures, and were predictable using current AASHTO provisions. A limitation on service-level stresses of $f_s{\leq}414$ MPa (60 ksi) is nonetheless recommended.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.693-696
• /
• 2009

The ray-tracing technique was used to optimize the light guide plate for the purpose of improving the on-axis luminance on the edge-lit backlights. One-dimensional prisms and engraved V-shaped patterns were applied to the upper and the lower surfaces of the light guide plate, respectively. By optimizing the apex angles of these micro-structures, as well as the shape of the reverseprism film put over the light guide plate, highly-collimated light-output distribution could be obtained on the backlight, which may contribute to the development of mobile LCD's with low power consumption.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.43-46
• /
• 2000

We generated 9-fs pulses from a Kerr-lens mode-locked Ti:sapphire laser only using commercial optical components. Two sets of prisms pair made of fused silica were used to compensate group delay dispersion inside and outside the laser oscillator respectively, and broadband mirrors were used to obtain a broad spectrum. By comparison between reflectance curves of the broadband mirrors and those of previous ones, broadband mirrors which have high reflectance bandwidth of over 180 nm were found to be essential to produce sub-IO-fs pulses. ulses.

• Economic and Environmental Geology
• /
• v.18 no.2
• /
• pp.159-166
• /
• 1985

The computation of gravity anomalies by multi pole expansion is derived and compared with exact calculation for right rectangular prisms and right circular cylinders. For sources near field points, the multipole expansion results in a better approximation in volume integrals than in surface integrals. Nonetheless two approximate methods are coincident in the far-field of the general geophyical prospecting.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.9
• /
• pp.870-873
• /
• 1995

A new ternary transition-metal selenide, Ta2Ni3Se8 has been synthesized from a eutectic halide flux. The structure of this phase has been characterized by single crystal X-ray diffraction techniques. The compound crystallizes in the orthorhombic system (D2h9-Pbam, a= 14.788(4) Å, b= 10.467(3) Å, c=3.4563(8) Å) with two formula units in the unit cell. This compound adopts the Nb2Pd3Se8 structure type. Hence, there are two chains of edge-sharing selenium trigonal prisms centered by tantalum atoms and these chains are interconnected through two kinds of nickel atoms. Nickel occupies both square planar and square pyramidal sites as does palladium in Nb2Pd3Se8. Electrical conductivity measurements indicate that this material is semiconducting.

• Wind and Structures
• /
• v.21 no.4
• /
• pp.383-405
• /
• 2015

This study investigated aerodynamic characteristics of an inclined square prism experimentally. Pressure measurements were performed on a static square prism with a series of inclinations including forward inclinations (inclined to the upwind direction) and backward inclinations (inclined to the downwind direction). The prism with a vertical attitude was also tested for comparisons. Based on the pressure data, influences of the inclinations on aerodynamic characteristics (e.g., force coefficients, pressure distributions on the surfaces, and vortex shedding features) of the square prism were evaluated in detail. The results show that the inclinations have significant effects on these aerodynamic characteristics. Furthermore, the influences of the forward and backward inclinations are quite different.

• Wind and Structures
• /
• v.16 no.6
• /
• pp.603-616
• /
• 2013

This study is aimed at formulating an empirical equation for the across-wind fluctuating moment and spectral density coefficient, which are needed to estimate the across-wind dynamic responses of tall buildings, as a function of the side ratios of buildings. In order to estimate an empirical formula, wind tunnel tests were conducted on aero-elastic models of the rectangular prisms with various aspect and side ratios in turbulent boundary layer flows. In this paper, criteria for the across-wind fluctuating moment and spectral density are briefly discussed and the results are analyzed mainly as a function of the side ratios of the buildings. Finally, empirical formulas for the across-wind fluctuating moment coefficient and spectral density coefficient according to variation of the aspect ratio are proposed.

• Journal of Korean Clinical Health Science
• /
• v.9 no.2
• /
• pp.1520-1525
• /
• 2021

Purpose. This study conducted visual function training for children under 12 years of age who relapsed after surgery for intermittent exotropia. We are trying to find out whether the visual function has been improved by visual function training. Methods. After surgery, the subject with recurrent exotropia was given a prescription for refractive error, followed by visual function training and vision therapy with visual sence using prisms and lenses. Results. The subjects' positive relative convergence improved to 19.69𝚫, corrected visual acuity improved to 0.88, and stereoscopic vision function improved to 53.08 arc second. It was found that the smaller the angle of deviation at the time of recurrence after surgery, the better the vision therapy effect. Conclusions. It can be seen that visual function training is helpful in improving visual function, and the importance of visual function training can be known.

• Steel and Composite Structures
• /
• v.39 no.3
• /
• pp.291-306
• /
• 2021

Based on Reissner's mixed variational theorem (RMVT), the authors develop a semi-analytical finite element (FE) method for a three-dimensional (3D) bending analysis of nonhomogeneous orthotropic, complete and incomplete toroidal shells subjected to uniformly-distributed loads. In this formulation, the toroidal shell is divided into several finite annular prisms (FAPs) with quadrilateral cross-sections, where trigonometric functions and serendipity polynomials are used to interpolate the circumferential direction and meridian-radial surface variations in the primary field variables of each individual prism, respectively. The material properties of the toroidal shell are considered to be nonhomogeneous orthotropic over the meridianradial surface, such that homogeneous isotropic toroidal shells, laminated cross-ply toroidal shells, and single- and bi-directional functionally graded toroidal shells can be included as special cases in this work. Implementation of the current FAP methods shows that their solutions converge rapidly, and the convergent FAP solutions closely agree with the 3D elasticity solutions available in the literature.