• 대한한방부인과학회지
• /
• 제25권3호
• /
• pp.85-94
• /
• 2012

Objectives: We have studied the syndrome differentiation of ultrasound of retroverted uterus(RU) as the inspection in traditional Korean medicine. Methods: Eighty-four patients, who visited H clinic for infertility treatment, were recruited and evaluated by questionnaires and ultrasound, from April, 2012 to May, 2012. We used ultrasound(Logiq C3; GE Health care) for examination of RU. For statistics, we used Fisher's extract test to evaluate the RU and symptoms, and Chi-square test to evaluated the RU and syndrome differentiations, and Student T-test for the relationship between RU and each score of syndrome differentiation, using PASW Statistics(version 18.0.0) and GraphPad Prism(version 5.01). Results: 1. RU was correlated with moderate or severe dysmenorrhea and premenstrual lower abdominal pain. 2. In syndrome differentiation, blood stasis questionnaire was correlated with RU. 3. RU was related with dysmenorrhea, mass of low abdomen, pressure pain, clod of menstrual blood, dyspareunia. Conclusions: The ultrasound of RU might be related with the syndrome of blood stasis.

• 한국안광학회지
• /
• 제4권1호
• /
• pp.73-76
• /
• 1999

정상적인 초등학교 학생 (8 - 13세) 1306명을 대상으로 사사를 조사한 결론은 다음과 같다. 조사방법은 MIN GLASSES로 차폐 검사 후 이상자를 다시 정밀 조사하였다. MIN GLASSES 사용은 안구 운동의 관찰이 용이하였고, 정밀 검사와의 오차가 0.2%로 아주 작았다. 사시환자는 전체 대상자에서 16명(1.2%)이었고, 연령별분포는 11, 12, 13세에서는 고루 분포하였으나, 10세 1명 그리고 8세, 9세에서는 관찰되지 않았다. 성별에 따른 분포는 전체 남자 654명중 6명(0.9%), 여자 652명중 16명(2.4%)으로 여자가 남자보다 높게 조사되었다. 사시의 종류는 환자 모두가 사위였으며, 외사위 8명, 내사위 7명 그리고 상사위 1명으로 외사위와 내사위가 같은 비율로 관찰되었다. 내, 외사위의 성별 빈도는 여자가 남자보다 약 3배 높게 나타났다. 환자의 시력 검사 결과 굴절이상 약시로 인한 사위환자는 3명이었으나, 색각 검사는 모두 정상으로 조사되었다.

• 대한의생명과학회지
• /
• 제17권2호
• /
• pp.151-155
• /
• 2011

Short tandem repeats (STRs) loci are the genetic markers used for forensic human identity test. With multiplex polymerase chain reaction (PCR) assays, STRs are examined and measured PCR product length relative to sequenced allelic ladders. In the repeat region and the flanking region of the commonly-used STR may have DNA sequence variation. A mismatch due to sequence variation in the DNA template may cause allele drop-out (i.e., a "null" or "silent" allele) when it falls within PCR primer binding sites. The STR markers were co-amplified in a single reaction by using commercial PowerPlex$^{(R)}$ 16 system and AmpFlSTR$^{(R)}$ Identifiler$^{(R)}$ PCR amplification kits. Separation of the PCR products and fluorescence detection were performed by ABI PRISM$^{(R)}$ 3100 Genetic Analyzer with capillary electrophoresis. The GeneMapper$^{TM}$ ID software were used for size calling and analysis of STR profiles. Here, this study described a forensic human identity test in which allelic drop-out occurred in the STR system D18S51. During the course of human identity test, two samples with a homozygous (16, 16 and 21, 21) genotype at D18S51 locus were discovered using the PowerPlex$^{(R)}$ 16 system. The loss of alleles was confirmed when the samples were amplified using AmpFlSTR$^{(R)}$ Identifiler$^{(R)}$ PCR amplification kit and resulted in a heterozygous (16, 20 and 20, 21) genotype at this locus each other. This discrepancy results suggest that appropriate measures should be taken for database comparisons and that allele should be further investigated by sequence analysis and be reported to the forensic community.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.93-98
• /
• 2008

To investigate the characteristics of water droplet on the gas diffusion layer from both top-view and side-view of the flow channel, a rig test apparatus was designed and fabricated with prism attached plate. This experimental device is used to simulate the growth of single liquid water droplet and its transport process with various air flow velocity and channel height. The contact angle hysteresis and height of water droplet are measured and analyzed. It is found that droplet tends towards to be instable by decreasing channel height, increasing flow velocity or making GDL more hydrophobic. Also, the simplified force balance model matches with experimental data only in a restricted range of operating conditions and shows discrepancy as the air flow velocity and channel height increases.

• Wind and Structures
• /
• 제21권2호
• /
• pp.183-202
• /
• 2015

Experiments on two-dimensional rectangular prisms with various side ratios (B/D=2, 3, and 4, where B is the along-wind dimension, and D is the across-wind dimension) and rounded corners (R/D=0%, 5%, 10%, and 15%, where R is the corner radius) are reported in this study. The tests were conducted in low-turbulence uniform flow to measure the wind pressures on the surfaces of 12 models for Reynolds numbers ranging from $1.1{\times}10^5$ to $6.8{\times}10^5$. The aerodynamic force coefficients were obtained by integrating the wind pressure coefficients around the model surface. Experimental results of wind pressure distributions, aerodynamic force coefficients, and Strouhal numbers are presented for the 12 models. The mechanisms of the Reynolds number effects are revealed by analyzing the variations of wind pressure distributions. The sensitivity of aerodynamic behavior to the Reynolds number increases with increasing side ratio or rounded corner ratio for rectangular prisms. In addition, the variations of the mean pressure distributions and the pressure correlations on the side surfaces of rectangular prisms with the rounded corner ratio are analyzed at $Re=3.4{\times}10^5$.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권17호
• /
• pp.7987-7990
• /
• 2015

Chronic lymphocytic leukemia (CLL)is the most common leukemia in adults in Western countries but is relatively rare in Asia. Immune hemolytic anemia, Evan's syndrome, lymphadenopathy, organomegaly and B symptoms are the main complaints of patients in CLL. The present retrospective analysis evaluated a group of 109 patients with CLL over a 9-year period, studying correlations between sex, age and overall survival. The patients were hospitalized in the Clinic of Hematology and Oncology, Kermanshah, Iran, between 2006 and 2014. Data analysis for sex and age was performed using IBM SPSS19 and overall survival was plotted by Kaplan-Meier plot, Log-rank test in Graph Pad prism 5 Software for five-year periods. The mean age of diagnosis for CLL patients was 60.73 years, 59.6% male. Survival rate patients was 64% and mean overall survival was 38.5 months. In the Rai system, fourteen patients (12.8%) had stage III and twenty eight patients (25.7%) had stage IV. Most frequent clinical features in patients with CLL were lymphadenopathy (38.7%) and organomegaly (34%), respectively. There is not relationship between sex and age in patients but overall survival rate in females was higher than in males. In Asian countries, CLL is more in male and in age above 60 years. Complaints about lymphadenopathy and virus infection are prevalent.

• Steel and Composite Structures
• /
• 제20권6호
• /
• pp.1275-1303
• /
• 2016

Steel plates and carbon-fiber-reinforced polymer (CFRP) laminates or plates bonded to concrete substrates have been widely used for concrete strengthening. However, this technique cause plate debonding, which makes the strengthening system inefficient. The main objective of this study is to enhance the bond strength of externally bonded steel plates and CFRP laminates to the concrete surface by proposing new embedded adhesive and steel connectors. The effects of these new embedded connectors were investigated through the tests on 36 prism specimens. Parameters such as interfacial shear stress, fracture energy and the maximum strains in plates were also determined in this study and compared with the maximum value of debonding stresses using a relevant failure criterion by means of pullout test. The study indicates that the interfacial bond strength between the externally bonded plates and concrete can be increased remarkably by using these connectors. The investigation verifies that steel connectors increase the shear bond strength by 48% compared to 38% for the adhesive connectors. Thus, steel connectors are more effective than adhesive connectors in increasing shear bond strength. Results also show that the use of double connectors significantly increases interfacial shear stress and decrease debonding failure. Finally, a new proposed formula is modified to predict the maximum bond strength of steel plates and CFRP laminates adhesively glued to concrete in the presence of the embedded connectors.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2172-2194
• /
• 2023

A variational nodal method (VNM) with unstructured-mesh is presented for solving steady-state and dynamic neutron diffusion equations. Orthogonal polynomials are employed for spatial discretization, and the stiffness confinement method (SCM) is implemented for temporal discretization. Coordinate transformation relations are derived to map unstructured triangular nodes to a standard node. Methods for constructing triangular prism space trial functions and identifying unique nodes are elaborated. Additionally, the partitioned matrix (PM) and generalized partitioned matrix (GPM) methods are proposed to accelerate the within-group and power iterations. Neutron diffusion problems with different fuel assembly geometries validate the method. With less than 5 pcm eigenvalue (k_eff) error and 1% relative power error, the accuracy is comparable to reference methods. In addition, a test case based on the kilowatt heat pipe reactor, KRUSTY, is created, simulated, and evaluated to illustrate the method's precision and geometrical flexibility. The Dodds problem with a step transient perturbation proves that the SCM allows for sufficiently accurate power predictions even with a large time-step of approximately 0.1 s. In addition, combining the PM and GPM results in a speedup ratio of 2-3.

• 한국정밀공학회지
• /
• 제24권4호
• /
• pp.115-122
• /
• 2007

Recently, remarkable progress has been made in both technology and production of optical elements including aspheric lens. Especially, requirements for machining glass materials have been increasing in terms of limitation on using environment, flexibility of material selection and surface accuracy. In the past, precision optical glass lenses were produced through multiple processes such as grinding and polishing, but mass production of aspheric lenses requiring high accuracy and having complex profile was rather difficult. In such a background, the high-precision optical GMP process was developed with an eye to mass production of precision optical glass parts by molding press. This GMP process can produce with precision and good repeatability special form lenses such as camera, video camera, aspheric lens for laser pickup, $f-\theta$ lens for laser printer and prism, and me glass parts including diffraction grating and V-grooved base. GMP process consist a succession of heating, forming, and cooling stage. In this study, as a fundamental study to develop molds for GMP used in fabrication of glass lens, we conducted a glass lens forming simulation. In prior to, to determine flow characteristics and coefficient of friction, a compression test and a compression farming simulation for PBK40, which is a material of glass lens, were conducted. Finally, using flow stress functions and coefficient of friction, a glass lens forming simulation was conducted.

• 재활치료과학
• /
• 제6권1호
• /
• pp.11-23
• /
• 2017

편측 공간무시는 주로 우측 대뇌반구의 병변으로 인한 뇌졸중 이후 발생하는 신경학적 질환으로, 병변 반대 측 신체와 공간에 대한 처리 기능과 주의집중에 문제가 발생한다. 기능적 신경이미지 연구에서 편측 공간무시는 큰 수준의 중대뇌 동맥, 페리실비안 연결망, 주의집중 연결망의 손상과 연관성이 있다고 보고하였다. 편측 공간무시는 부정적인 예후와 관련이 있기 때문에 정확한 진단과 중재를 위해 편측 공간무시의 유형과 이론 그리고 전통적 평가와 기능적 평가를 포함한 임상적 평가가 고려되어야 한다. 편측 공간무시의 치료는 하향식 접근방법과 상향식 접근방법으로 구분하며, 두 접근방법을 결합하는 형태가 가장 효과적일 수 있다. 편측 공간무시의 모든 최신 중재방법 중에서 프리즘 적응이 가장 적절한 중재법으로 연구되고 있으나, 편측 공간무시의 유형과 병변 위치 등을 고려하여 환자에게 적절한 중재를 적용하는 것이 중요하다.