• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.201-202
• /
• 2018

자동차 부품산업은 자동차산업의 후방산업으로 완성차 메이커 제조산업의 조립용인 중간재 산업으로 부품의 품질에 따라 완성차의 성능이 좌우된다. 자동차 산업구조상 완성차에 종속적인 사업구조로 부품사의 독자 성장이 어렵고 수익성이 완성차업체에 종속 된다. 자동차부품사의 대형화 및 생산공정 자동화 변화로 기존의 수직계열화된 부품 공급 관계에도 변화가 예상되며, 완성차업체는 통합적인 시스템 부품을 생산할 수 있는 글로벌 대형 부품업체에 의존하는 상황이 전개될 수도 있다. 이와 같은 위기와 변화를 극복하기 위해 본 연구에서는 산업구조분석을 자동차 부품산업에 적용하여 자동차부품산업의 경쟁력제고 전략을 도출하고자 한다.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.79-85
• /
• 2008

Our paper deals with a method for supporting multiple call/sessions in a mobile terminal. The different identifier for each protocol layer is assigned to each session when a mobile terminal sets SDP for multimedia services. In particular, QoS based tasks are used for managing the traffics in radio interface. Also, queuing, admission control, load control, resource allocation and scheduling are done based on the priority of sessions. The various multimedia services which is different in the requirement of resource allocation are able to be serviced simultaneously because a mobile terminal can provide the various services based on this scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.946-951
• /
• 2009

The small multi-jointed robots for most education are developed with the way of firmware. But the firmware may be very difficult to develop as gradually increasing throughputs and control routines. Due to limit of firmware we try to use on RTOS, but hard to adapt on the small multi-jointed robots. It would be hard to install RTOS into the small multi-jointed robots because of the size capacity of RTOS, and lack of libraries for control of the particular hardware. Moreover, even its RTOS with many functions causes its to make overheads scheduling, TCB (Task Control Block), and task states. Also to keep maintenance of RTOS, it is composed of components for the whole structure of my proposed RTOS. Additionally, We provided with libraries of servo motor and sensor control and developed RMS (Rate Montonic scheduler) to handle tasks on real time and reduce overheads. Therefore, It is possible to work the fixed priority and task preemptive way. We show one example of the multi-jointed robot installed with my proposed RTOS, which shows to obstacle avoidance and climbing up the slope.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.181-189
• /
• 2001

In this thesis, a policing algorithm is proposed, which is one of the traffic management function in ATM networks. The proposed algorithm minimizes CLR(Cell Loss patio) of high priority cells and solves burstiness problem of the traffic caused by multiplexing and demultiplexing process. The proposed algorithm has been implemented with VHDL and is divided into three parts, which are an input module, an UPC module, and an output module. In implementation of the UPC module\`s memory access, memory address is assigned according to VCI\`s LSB(Lowest Significant Byte) of ATM header for convenience. And the error of VSA operation from counter\`s wrap-around can be recovered by the proposed method. ANAM library 0.25 $\mu\textrm{m}$ and design compiler of Synopsys are used for synthesis of the algorithm and Synopsys VSS tool is used for VHDL simulation of it

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.865-873
• /
• 2010

In this paper, a novel schedulability criteria is developed to provide handover calls with Quality of Service (QoS) guarantees in terms of both minimum available bandwidth, maximum tolerated packet delay, and other additive QoS constraints as required by the real-time mobile traffic. This requires prediction of the handover time using mobility trends on the mobile station, which is used as input to this work. After the handover time and the QoS are negotiated, the destination base station makes attempts to give priority to handover calls over new calls, and pre-reserves resources that will have more chance of being available during the actual handover.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.22-32
• /
• 2021

To meet rapidly changing market demands, manufacturers strive to increase both of productivity and diversity at the same time. As a part of those effort, they are applying flexible manufacturing systems that produce multiple types and/or options of products at a single production line. This paper studies such flexible manufacturing system with multiple types of products, multiple Bernoulli reliability machines and dedicated buffers between them for each of product types. As one of the prevalent control policies, priority based policy is applied at each machines to select the product to be processed. To analyze such system and its performance measures exactly, Markov chain models are applied. Because it is too complex to define all relative transient and its probabilities for each state, an algorithm to update transient state probability are introduced. Based on the steady state probability, some performance measures such as production rate, WIP-based measures, blocking probability and starvation probability are derived. Some system properties are also addressed. There is a property of non-conservation of flow, which means the product ratio at the input flow is not conserved at the succeeding flows. In addition, it is also found that increased buffer capacity does not guarantee improved production rate in this system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.509-520
• /
• 2007

In this paper, we propose a real-time sensor node platform that guarantees the real-time scheduling of periodic and aperiodic tasks through a multitask-based software decomposition technique. Since existing sensor networking operation systems available in literature are not capable of supporting the real-time scheduling of periodic and aperiodic tasks, the preemption of aperiodic task with high priority can block periodic tasks, and so periodic tasks are likely to miss their deadlines. This paper presents a comprehensive evaluation of how to structure periodic or aperiodic task decomposition in real-time sensor-networking platforms as regard to guaranteeing the deadlines of all the periodic tasks and aiming to providing aperiodic tasks with average good response time. A case study based on real system experiments is conducted to illustrate the application and efficiency of the multitask-based dynamic component execution environment in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. It shows that our periodic and aperiodic task decomposition technique yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• Journal of KIISE:Software and Applications
• /
• v.35 no.1
• /
• pp.22-32
• /
• 2008

To overcome the weakness of the image retrieval system using the existing Ontology and the distributed image based on the database having a simple structure, HERMES was suggested to ensure the self-control of various image suppliers and support the image retrieval based on semantic, the mentioned framework could not solve the problems which are not considered the deterioration in the capacity and scalability when many users connect to broker server simultaneously. In this paper the tables are written which in the case numerous users connect at the same time to the supply analogous level of services without the deterioration in the capacity installs Broker servers and then measures the performance time of each inner Broker Component through Monitoring System and saved and decides the ranking in saved data. As many Query performances are dispersed into several Servers User inputted from the users Interface with reference to Broker Ranking Table, Load Balancing system improving reliability in capacity is proposed. Through the experiment, the scheduling technique has proved that this schedule is faster than existing techniques.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.67-84
• /
• 2004

Real-time database systems (RTDBS) are database systems whose transactions are associated with timing constraints such as deadlines. Therefore transaction needs to be completed by a certain deadline. Besides meeting timing constraints, a RTDBS needs to observe data consistency constraints as well. That is to say, unlike a conventional database system, whose main objective is to provide fast average response time, RTDBS may be evaluated based on how often transactions miss their deadline, the average lateness or tardiness of late transactions, the cost incurred in transactions missing their deadlines. Therefore, in RTDBS, transactions should be scheduled according to their criticalness and tightness of their deadlines, even If this means sacrificing fairness and system throughput, And It always must guarantee preceding process of the transaction with the higher priority. In this paper, we propose an efficient real-time scheduling algorithm (Multi-level EFDF) that alleviates problems of the existing real-time scheduling algorithms, a real-time concurrency control algorithm(2PL-FT) for firm and soft real-time transactions. And we compare the proposed 2PL F[ with AVCC in terms of the restarting ratio and the deadline missing ratio of transactions. We show through experiments that our algorithms achieve good performance over the other existing methods proposed earlier.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.127-133
• /
• 2011

This study proposed the PHB mapping model for combining services with DiffServ in the MPLS network capable of high-speed switching, and the effective differential bandwidth service model in the MPLS network on the basis of the proposed mapping model. The result of simulation on the service model using PRI showed that the transmission rate was achieved as much as the assigned bandwidth regardless of the increase of traffic as far as the EF PHB did not exceed the assigned bandwidth at the peak rate when the overall traffic increased.