• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.580-591
• /
• 2019

This study analyzed roadkill hotspots in Yeongju, Mungyeong-si Andong-si and Cheongsong-gun to compare the method of searching the area of the spatial cluster for selecting the roadkill hotspots. The local spatial autocorrelation index Getis-Ord Gi* statistics were calculated by different units of analysis, drawing hotspot areas of 9% from 300 m and 14% from 1 km on the basis of the total road area. The rating of Z-score in the 1km hotspot area showed the highest Z-score in the 28th National Road section on the border between Yecheon-gun and Yeongj-si. The kernel density method performed general kernel density estimation and network kernel density estimation analysis, both of which made it easier to visualize roadkill hotspots than district unit analysis, but there were limitations that it was difficult to determine statistically significant priority. As a result, local hotspot areas were found to be different according to the cluster analysis method, and areas that are in common need of reduction measures were found to be the hotspot of 28th National Road through Yeongju-si and Yecheon-gun. It is deemed that the results of this study can be used as basic data when identifying roadkill hotspots and establishing measures to reduce roadkill.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1011-1019
• /
• 2000

The purpose of this study is to examine the basis of design condition of existing treatment processes, namely, Extended Aeration Process, Conventional Activated Process, High Rate Aeration Process and Modified Aeration Process, by clarifying the correlations of influent wastewater concentration, hydraulic retention time, food-to-microorganism ratio and sedimentation of sludge, as well as to ascertain the feasibility of design, regardless of the existing design condition. In particular, this study made a priority investigation of hydraulic retention time and sludge sedimentation, because sludge sedimentation is the main factor$^{1)}$ which determines the operating conditions of existing treatment processes. Therefore, it is generally known that in case exceeds the sphere of design presented for each treatment, sludge bulking may occur. The results of Lesperance's test$^{1)}$, which formed the basis of design, showed the sphere of loading without security of sludge sedimentation, as in Fig. 1. The reason for sludge bulking in a certain condition, as above, is due to failure in application of optimum loading corresponding to each retention time by employing a few operating condition, which proved to be consecutively workable after years of trials and failures by Lesperance, for test conditions. However, the result of this test showed that in case of proper maintenance of loading. sludge sedimentation can be ensured under 120 SVI. Therefore, this study suggested hydraulic retention time and its corresponding optimum loading, and identified the hydraulic retention time as a determinant of sludge sedimentation. And. on the basis of these findings, this study suggested the feasiblity of UHR(Ultra High Rate), a new operating process, exceeding several times the applicable loading value of High Rate Aeration Process under one hour retention time which has not yet applied to the existing treatment processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.709-718
• /
• 2016

The study considers viewpoints for qualitative improvement of landscape planning based on research literature, books and reports. By classifying items used in this study, evaluation criteria was derived for viewpoint selection using SPSS Statistics. In addition, we establish weights and prioritize viewpoints by measuring the relative importance within the hierarchical index. The analysis results are as follows: First, 16 viewpoints were determined using surveys from experts to establish specific and systematic plans for landscape simulation. Second, with respect to the medium classification level of viewpoint evaluation, the most important factor found was 'view' followed by 'publicness' and 'place.' Third, priority by viewpoint was found to exhibit the following order of relative importance: visual openness of viewpoint, favorability as view target, cultural property space, historicity, public place, gateway place, area where the target can be observed, thickly-populated or most-used place, place where various shapes of targets and surrounding landscape can be identified, ecological protection area, river and waterside area, viewing angle (relief-etching), viewing direction, major roads, distance between the viewpoint and the target, and plains and farmland. These results can contribute to developing systematic and reliable analysis frame for qualitative improvement of landscape planning and evaluating landscape simulation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.77-77
• /
• 2019

본 연구는 DMZ일원에서 생육하고 있는 자생식물에 대하여 우선순위를 설정하고, DMZ일원 종다양성의 지속적인 건강성 유지 및 보전을 위한 중장기 모니터링 기술을 개발하기 위하여 중점관리종을 선정하고자 하였다. 또한, 이를 토대로 DMZ지역과 북방계지역에 대한 생물자원을 연구할 수 있는 기본틀을 마련하고 생물권보전지역을 지정함으로써 국제교류 및 이해에 기여하는 연구를 수행하였다. 현재 DMZ일원의 관속식물상은 157과 754속 2,047종 12아종 340변종 105품종 총 2,504분류군이 생육하고 있다. 이 중 희귀식물은 총 285분류군, 특산식물은 총 124분류군, 침입외래식물은 130분류군이 분포하고 있다. 전체 2,504분류군 중 희귀식물, 특산식물, 침입외래식물을 대상으로 전국분포정보 및 DMZ일원 분포정보를 수집하였다. 이를 토대로 희귀 특산식물에 해당하는 보호종 선정을 위한 평가지표는 IUCN 적색목록기준 의 국내수준 및 DMZ일원의 희귀 특산식물의 등급을 CR종 3점, EN종 2점 VU종 1점으로 점수를 평가한 뒤 국내 분포 지역수(IUCN red list criteria B)에 대한 가중치를 적용하여 보호우선순위를(I$10,576.9km^2$) 대비 종 분포면적의 0~20% 1점, 21~40% 1.5점, 41~60% 2점, 61~80% 2.5점, 81~100% 3점으로 분포등급을 평가한 뒤 생태교란종(14분류군) 및 산림침입종(181분류군)에 대한 가중치를 적용하여 관리우선순위를(I

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.6
• /
• pp.55-69
• /
• 2018

As disaster risk and climate change volatility increase, there are more efforts to adapt to disasters such as forest fires, floods, and landslides. Most of the research, however, is about influence of human activities on disaster and there is few research on disaster adaptation for species. Previous studies focusing on biodiversity in selecting conservation areas have not addressed threats of disaster in the habitats for species. The natural disasters sometimes play role of drivers of ecological successions in the long run, but they might cause serious problems for the conservation of vulnerable species which are endangered. The purpose of this study is to determine whether soil loss (SL) is effective in selecting habitat management areas for amphibians and reptiles. RUSLE model was used to calculate soil loss (SL) and the distribution of each species (SD) was computed with MaxEnt model to find out the biodiversity index. In order to select the habitat management area, we estimated the different results depending if value of soil loss was applied or not by using MARXAN, a conservation priority selection tool. With using MARXAN, conservation goals can be achieved according to the scenario objectives, and the study has been made to meet the minimum habitat area. Finally, the results are expressed in two; 1) the result of soil loss and biodiversity with MATRIX method and 2) the result of regional difference calculated with MARXAN conservation prioritization considering soil loss. The first result indicates that the area with high soil loss and low species diversity have lower conservation values and thus can be managed as natural disturbances. In the area where soil loss is high and species diversity is also high, it becomes where a disaster mitigation action should be taken for the species. According to the conservation priorities of the second result, higher effectiveness of conservation was obtained with fewer area when it considered SL in addition to SD, compared to when considered only biodiversity. When the SL was not taken into consideration, forest area with high distribution of species were important, but when SL considered, the agricultural area or downstream of the river were represented to be a major part of habitats. If more species data or disaster parameters other than soil loss are added as variables later, it could contribute as a reference material for decision-making to achieve various purposes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.94-101
• /
• 2021

According to the Facility Management System (FMS) operated by the Korea Authority of Land & Infrastructure Safety, it is expected that the number of aging facilities that have been in use for more than 30 years will increase rapidly to 13.9% in 2019 and 34.5% in 2929, and end up with a social problem. In addition, with the revision of "Common Application of Seismic Design Criteria" by the Ministry of Public Administration and Security in 2017, it is mandatory to re-evaluate all existing road facilities and if necessary seismic reinforcement should be done to minimize the magnitude of earthquake damage and perform normal road functions. The seismic performance management-decision support technology currently used in seismic performance management practice in Korea only determines the earthquake-resistance reinforcement priority based on the qualitative index value for the seismic performance of individual facilities. However with this practice, normal traffic functions cannot be guaranteed. A new seismic performance management decision support technology that can provide various judgment data required for decision making is needed to overcome these shortcomings and better perform seismic performance management from a road network perspective.

• Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.319-342
• /
• 2024

Background: The current study is the first quantitative ethnobotanical evaluation of Fateh Pur Thakyala, an unexplored area of Azad Kashmir, Pakistan. The exploration and quantification of ethnobotanical knowledge among people of the study area mainly focused during field survey. The study likely focuses on documenting and preserving the indigenous knowledge and practices related to medicinal plants in the region. A total 70 informants (45 males and 25 females) selected randomly to collect data were interviewed using semi structured questionnaire. The data like demographic characteristics of informants, methods of preparation, life form, modes of application, parts used, and ethnomedicinal uses was documented. The quantitative indices including relative frequency of citation (RFC), use value (UV), informant consensus factor (ICF), fidelity level (FL), consensus value for plant part (CPP), rank order priority (ROP), percentage respondent knowledge (PRK), were applied to analyze the collected data. Furthermore, primary data were also compared with fifteen papers published from adjoining areas by Jaccard index (JI). Results: The current study reported 135 medicinally important plants species belonging to 115 genera and 54 families. The dominating family was Asteraceae (14 sp.), followed by Fabaceae (11 sp.), Rosaceae (11 sp.), Lamiaceae (8 sp.), Moraceae (5 sp.), Solanaceae, Cyperaceae, Euphorbiaceae (4 sp.) and Poaceae, Sapindaceae, Rhamnaceae, Mrytaceae, Malvaceae (3 sp.) for each. The study revealed that there were small differences in usage of medicinal plants of different families. The herbaceous life form was dominating the study area with (79 sp.) used as herbal medicines followed by shrubs (23 sp.) and trees (33 sp.). The comparative study of for novelty of species and their uses by JI revealed 13 novel plants species which were not reported earlier from this region. Conclusions: Local inhabitants still prioritize herbal medicines as an effective way to treat a wide variety of ailments. Elders and health practitioners of the study area are well aware of indigenous knowledge about medicinal plants, but young people are not much interested in herbal practices. Thus, valuable knowledge about the use of plants is on the verge of decline. The overexploitation and seasonal fires are major threats for medicinal flora in the area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.194-201
• /
• 2010

Purpose: The purpose was to compare the marginal fidelity and the fracture resistance of the zirconia crowns according to the various coping designs with different thicknesses and cement types. Materials and methods: Zirconia copings were designed and fabricated with various thicknesses using the CAD/CAM system (Everest, KaVo Dental GmbH, Biberach., Germany). Eighty zirconia copings were divided into 4 groups (Group I: even 0.3 mm thickness, Group II: 0.3 mm thickness on the buccal surface and the buccal half of occlusal surface and the 0.6 mm thickness on the lingual surface and the lingual half of occlusal surface, Group III: even 0.6 mm thickness, Group IV: 0.6 mm thickness on the buccal surface and the buccal half of occlusal surface and the 1.0 mm thickness on the lingual surface and the lingual half of occlusal surface) of 20. By using a putty index, zirconia crowns with the same size and contour were fabricated. Each group was divided into two subgroups by type of cement: Cavitec$^{(R)}$ (Kerr Co, USA) and Panavia-$F^{(R)}$ (Kuraray Medical Inc, Japan). After the cementation of the crowns with a static load compressor, the marginal fidelity of the zirconia crowns were measured at margins on the buccal, lingual, mesial and distal surfaces, using a microscope of microhardness tester (Matsuzawa, MXT-70, Japan, ${\times}100$). The fracture resistance of each crown was measured using a universal testing machine (Z020, Zwick, Germany) at a crosshead speed of 1 mm/min. The results were analyzed statistically by the two-way ANOVA and oneway ANOVA and Duncan's multiple range test at $\alpha$=.05. Results: Group I and III showed the smallest marginal fidelity, while group II demonstrated the largest value in Cavitec$^{(R)}$ subgroup (P<.05). For fracture resistance, group III and IV were significantly higher than group I and II in Cavitec$^{(R)}$ subgroup (P<.05). The fracture resistances of Panavia-$F^{(R)}$ subgroup were not significantly different among the groups (P>.05). Panavia-$F^{(R)}$ subgroup showed significantly higher fracture resistance than Cavitec$^{(R)}$ subgroup in group I and II (P<.05). Conclusion: Within the limitation of this study, considering fracture resistance or marginal fidelity and esthetics, a functional ceramic substructure design of the coping with slim visible surface can be used for esthetic purposes, or a thick invisible surface to support the veneering ceramic can be used depending on the priority.

• Clinical and Experimental Pediatrics
• /
• v.51 no.9
• /
• pp.950-955
• /
• 2008

Purpose : The objective of this study was to provide current estimates of the prevalence and examine trends of overweight and obesity in children and adolescents. Methods : Height and weight measurements from 183,159 (112,974 in 1997, 70,185 in 2005) children and adolescents aged 2 to 18 years were obtained via the 1997 and 2005 National Growth Survey. Obesity among children and adolescents was defined as being at or above the 95th percentile of the gender-specific body mass index (BMI) for age in the 2007 Korean National Growth Charts or a BMI of 25 or higher; overweight was defined as being at or above the 85th percentile to less than the 95th percentile BMI. Results : In 2005, 9.7% (11.3% for boys, 8.0% for girls) of South Korean children and adolescents were obese; 19.0% (19.7% for boys, 18.2% for girls) were overweight or obese. The overall prevalence of obesity increased from 5.8% in 1997 to 9.7% in 2005 (from 6.1% in 1997 to 11.3% in 2005 for boys and from 5.5% in 1997 to 8.0% in 2005 for girls); the increasing trend was most evident in boys, especially those aged 13-18 years. Conclusion : The prevalence of obesity among children and adolescents increased significantly during the eight-year period from 1997 to 2005. This study suggests that we need to make a priority of developing strategies to control obesity in children and adolescents; the potential health effects of increases in obesity are of considerable public health importance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.1-11
• /
• 2012

This study focused on establishing a natural rainwater circulation system using rainwater meant for relatively large urban development projects such as a new town development. In particular, when the location selection techniques for individual elements of a natural rainwater circulation system are developed for the integrated rainwater management, changes in hydrological environment will be minimized and the natural water circulation would be restored to realize the low impact development (LID). In that case, not only the excess will be reduced but water space and green areas in a city would also increase to improve the urban sustainability. First of all, there were five elements selected for the location selection of a rainwater circulation system intended for the integrated rainwater management: rainwater collection, infiltration, filtration, retention and movement spaces. After generating these items, the location selection items and criteria were defined for each of the five elements. For a technique to apply the generated evaluation items and criteria, a grid cell analysis was conducted based m the suitability index theory, and thematic maps were overlapped through suitability assessment of each element and graded based on the suitability index. The priority areas were identified for each element. The developed technique was applied to a site where Gim-cheon Innovation City development is planned to review its feasibility and limitations. The combined score of the overlapped map for each element was separated into five levels: very low, low, moderate, high and very high. Finally, it was concluded that creating a rainwater circulation system conceptual map m the current land use plan based on the outcome of the application would be useful in building a water circulation system at the de1ailed space planning stage after environmental and ecological planning. Furthermore, we use the results of this study as a means for environment-friendly urban planning for sustainable urban development.