• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.193-201
• /
• 2014

In cognitive radio networks, the packet transmissions of the secondary users (SUs) can be interrupted randomly by the primary users (PUs). That is to say, the PU packets have preemptive priority over the SU packets. In order to enhance the quality of service (QoS) for the SUs, we propose a spectrum access strategy with an ${\alpha}$-Retry policy. A buffer is deployed for the SU packets. An interrupted SU packet will return to the buffer with probability ${\alpha}$ for later retrial, or leave the system with probability (1-${\alpha}$). For mathematical analysis, we build a preemptive priority queue and model the spectrum access strategy with an ${\alpha}$-Retry policy as a two-dimensional discrete-time Markov chain (DTMC).We give the transition probability matrix of the Markov chain and obtain the steady-state distribution. Accordingly, we derive the formulas for the blocked rate, the forced dropping rate, the throughput and the average delay of the SU packets. With numerical results, we show the influence of the retrial probability for the strategy proposed in this paper on different performance measures. Finally, based on the trade-off between different performance measures, we construct a cost function and optimize the retrial probabilities with respect to different system parameters by employing an iterative algorithm.

• Journal of Digital Convergence
• /
• v.9 no.5
• /
• pp.141-156
• /
• 2011

Auditors' subjective opinions m audit activities weaken reliability in audit judgments. This paper suggests fixed quantity models through requirement priority for improving objective evaluation and priorities of requirements in information system audit. The value of requirements was evaluated based on customers' requirements with a premise that they are not in the same level. Furthermore, the audit objective judgments were enhanced to enable fixed quantity of subjective audit by subdividing detailed evaluation index of requirement priority standards into importance of service and function on orderers' perspective, and sectioning cost and schedule on contractors' perspective.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.495-504
• /
• 2009

As the Reliability Centered Maintenance(RCM) is being studied, maintenance tasks can be performed effectively through the Risk Priority Number(RPN) evaluation about the components in the system. The RPN is usually calculated through arithmetical operations of three values, Severity, Occurrence, and Detection for each facility. This RPN provides information that includes risk level of the facility and the priority order of maintenance tasks for facility. However, if there is no sufficient historical failure data, it is difficult to calculate the RPN. In this case, historical failure data from other sources can be used and apply this data to korean railway system. In this paper, it is proposed that a new methodology to model the failure rate as a fuzzy membership function. This method is based on failure data from other sources by means of the fuzzy theory and the expert opinion system. And considering assessment tendency of each expert, distortions that happened when the failure rate of facilities is estimated were minimized. This results determine Occurrence values of facilities. Taking advantage of this result., the RPN can be calculated with Severity and Detection of facilities by using the fuzzy operation. The proposed method is applied the rail-way power substation.

• Journal of Information Technology Applications and Management
• /
• v.31 no.3
• /
• pp.39-52
• /
• 2024

The development of autonomous driving technology is expected to bring about a major change in the mobility rights of the transportation vulnerable. It is very important to identify user requirements in developing autonomous vehicles and service technologies for the transportation vulnerable. User requirements were derived for the wheelchair disabled and the walking disabled. Through focus interviews, a total of 58 requirements were derived for wheelchair-using disabled people and 53 requirements for walking disabled people. A Kano survey was conducted on 33 wheelchair disabled and 34 walking disabled. After that, the quality types of functional requirements in terms of autonomous vehicles and service environment development were analyzed using the Kano model. Priority analysis was conducted on the functions required by the wheelchair disabled and the walking disabled. The results of this study can be used as basic data to determine the priorities of user function requirements in the early stages of autonomous vehicle and service technology development.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.298-303
• /
• 2003

The eccentric rotor system has various problems by vibration of unbalance mass. Specially, it is difficult to analyze vibration problem for the drum washing machine due to correlation of transmission paths. We analyze the mechanical structure by multidimensional spectral density to identify the maximum vibration magnitude at the frequency domain. It estimates the coherence function of the signals to pass the transmission paths. In case of the drum washing machine, because the transmission paths are correlated partially it needs to determinate the priority ranking. And the correlated parts are eliminated using conditioned spectral density function. Finally the shielding effect method confirms the reasonability of the modeling.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.7-14
• /
• 2008

The main objective of sewer rehabilitation is to improve its function while eliminating inflow/infiltration (I/I). If we can identify the amount of I/I for an individual pipe, it is possible to estimate the I/Is of sub-areas clearly. However, in real, the amount of I/I for an individual pipe is almost impossible to be obtained due to the limitation of cost and time. In this study, I/I occurrence of each sewer pipe is estimated using AHP (Analytic Hierarch Process) and RPDM (Rehabilitation Priority Decision Model for sewer system) was developed using the estimated I/I of each pipe to perform the efficient sewer rehabilitation. Based on the determined amount of I/I for an individual pipe, the RPDM determines the optimal rehabilitation priority (ORP) using a genetic algorithm for sub-areas in term of minimizing the amount of I/I occurring while the rehabilitation process is performed. The benefit obtained by implementing the ORP for rehabilitation of sub-areas is estimated by the only waste water treatment cost (WWTC) of I/I which occurs during the sewer rehabilitation period. The results of the ORP were compared with those of a numerical weighting method (NWM) which is the decision method for the rehabilitation priority in the general sewer rehabilitation practices and the worst order which are other methods to determine the rehabilitation order of sub-areas in field. The ORP reduced the WWTC by 22% compared to the NWM and by 40% compared to the worst order.

• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.14-20
• /
• 2015

We created species richness maps of mammals, birds and plants using "Nnational Ecosystem Survey" data and identified correlations between species richness maps of each taxa. We examine the distribution of species richness of each taxa and calculated conservation priority rank through plotting species-area curves using an additive benefit function in Zonation. The conclusions of this study are as follows. First, plant showed high species richness in Gangwon province and Baekdudaegan, and mammals showed high species richness at eastern slope of Baekdudaegan in Gangwon province unusually and the species richness of mammals distributed equally except Gyeonggi and Chungnam province. However, birds showed high species richness in the west costal because the area is the major route of winter migratory birds. Second, correlation of each taxa's distribution is not significant. Correlation between mammals and birds is positive but correlations between birds and others are negative. Because mammals inhabit in forest but birds mostly live in coastal wetlands and rivers. Therefore, bird's habitats are not shared with other habitats. Third, the probability of mammals occurrence is very low under 25% in species-area curve, others increase proportionally to area. Birds increase dramatically richness at 10% because bird's habitat is concentrated in coastal wetlands and rivers. Plants increased gently species richness due to large forest in Gangwon province. We can calculate the predicted number of species in curves and plan various conservation strategies using the marginal number of species. Finally, high priority ranks for conservation distributed mainly in Gangwon province and Baekdudaegan. When we compared with priority map and terrestrial national parks, the parks were evaluated as high priority ranks. However, the rank of parks away from Baekdudaegan was low. This study has the meaning of selecting conservation priority area using National Ecosystem Survey. In spite of the omission of survey data in national parks and Baekdudaegan, the results were good. Therefore, the priority rank method using species distribution models is useful to selecting protected areas and improving conservation plans. However, it is needed to select protected areas considering various evaluation factors, such as rarity, connectivity, representativeness, focal species and so on because there is a limit to select protected area only using species richness.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.1-13
• /
• 1992

In this DQDB networks, erasure nodes may be allocated on the bus and release slots which already had been read by destination nodes. An important function of the erasure node must be to eliminate as many requests as erased slots used by downstream nodes. In the networks with priorities, following two additional issues must be solved : (1) accurately to guess for which priority the erased slots is to be used, and (2) to find in a short period a request of that priority to cancel. In this paper, we propose two erasure node algorithms based on elimination of the requests. In these algorithms, the requests are eliminated excessively at low load but optimum elimination can be achieved at full load. Simulation results show that these two algorithms have similar access delay to that of existing algorithms at low load and better performance at high load.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.149-152
• /
• 2000

In the Internet, multimedia data transfer is hard to guarantee the characteristics of the Real-Time because of the Best-Effort of the nature of IP, then additional mechanism is applied to multimedia application for real-time data. In this paper, we introduce the nature of multimedia and the necessary facility for real-time protocol. We propose protocol layer, which has necessary function above mentioned and offer the end-to-end transfer far real-time data. Also, the proposed protocol perform a next low operation: 1) a required information for QoS control by using Feedback mechanism is obtained from sender, 2) divided a transferred packet by delay and loss priority. 3) recognized the low service models, and 4) decided a bandwidth and QoS according to a network state

• International Journal of Contents
• /
• v.3 no.2
• /
• pp.25-29
• /
• 2007

In this paper, we discuss the mesh segmentation problem which divides a given 3D mesh into several disjoint sets. To solve the problem, we propose a greedy method based on the merging priority metric defined for representing the geometric properties of meaningful parts. The proposed priority metric is a weighted function using five geometric parameters, those are, a distribution of Gaussian map, boundary path concavity, boundary path length, cardinality, and segmentation resolution. In special, we can control by setting up the weight values of the proposed geometric parameters to obtain visually better mesh segmentation. Finally, we carry out an experiment on several 3D mesh models using the proposed methods and visualize the results.