• Title/Summary/Keyword: prior statement

Search Result 31, Processing Time 0.027 seconds

EFFECT OF SURFACE ROUGHNESS ON BOND STRENGTH IN TITANIUM-PORCELAIN SYSTEM (타이타늄의 표면거칠기가 도재의 결합강도에 미치는 영향)

  • Kim, Sang-Hun;Vang, Mong-Sook;Yang, Hong-So;Park, Sang-Won;Park, Ha-Ok;Lim, Hyun-Pil;Oh, Gye-Jeong
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.45 no.2
    • /
    • pp.182-190
    • /
    • 2007
  • Statement of problem: Titanium has many advantages of high biocompatibility, physical properties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast for surface treatment prior to porcelain application, the researches are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength of surface roughness between titanium and porcelain with the same surface topography. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 8 groups - group P : polished with #1200 grit SiC paper, group S10 : $1.0{\mu}m$ surface roughness with sandblasting, group S15 : $1.5{\mu}m$ surface roughness with sandblasting, group S20 : $2.0{\mu}m$ surface roughness with sandblasting, group S25 : $2.5{\mu}m$ surface roughness with sandblasting, group S30 : $3.0{\mu}m$ surface roughness with sandblasting, group S35 : $3.5{\mu}m$ surface roughness with sandblasting, group E : $1.0{\mu}m$ surface roughness with HCl etching. Results: Within the confines of our research, the following results can be deduced. 1. In the results of 3-point bending test, the bond strength of sandblasting group showed significant differences from one of polishing group, acid etching group(P<.05). 2. The bond strength of sandblasting groups did not show significant differences. 3. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The bond strength of sandblasting group was higher than 25 MPa, the requirement of ISO 9693. Conclusion: In above results, bond strength of titanium and low-fusing porcelain is influenced more to surface aspect than surface roughness. And titanium has clinically acceptable bond strength below surface roughness of $3.5{\mu}m$.

Improvement of Review System on Sea Area Utilization-Impact by Marine Environmental Management Law (해양환경관리법상 해역이용영향 검토기관의 발전방향)

  • Lee, Dae-In;Eom, Ki-Hyuk;Kim, Gui-Young;Jang, Ju-Hyoung
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.11 no.1
    • /
    • pp.55-62
    • /
    • 2008
  • This study investigated the status and problems of marine-related environmental impact assessment and a utilization-consultation system in Korea and suggested improvement of the review organization. Also, it conducted SWOT analysis based on evaluation of functions, roles and performance of the marine environmental impact assessment center and proposed development strategies of the center through introduction of expert opinions and advanced systems. The performance statement-review by the center in 2007 included 358 cases in total; 165 (46.1%) for consultation on utilization of sea area, 104 for environmental impact assessment (29.0%), and 89 (24.9%) for prior environmental review. The consultation on utilization of sea area can be divided into that for public water surface-use (41%) and reclamation (32%), and sea aggregate extraction process (21%). Although bad impacts on marine environment are reducing under the current system, there are some limits and problems to supplement it in terms of content, system and operation. Review system on sea area utilization-impact(marine environmental impact assessment center) by marine environmental management law needs to obtain expertise, fairness and efficiency and, to do so, have operational supports and institutional improvement to maximize its own functions and roles. At the same time, it is necessary for the center to establish identity and the status as a professional review organization by setting active development strategies inside the center. Finally, it should strengthen an consultation system of marine environmental impact assessment led by the related ministry to achieve effective coastal management.

  • PDF

Analysis of Free Cash Flow(FCF) on Korean Hospitals in Terms of FCF Hypothesis (잉여현금흐름가설의 관점으로 분석한 한국 병원의 규모별 잉여현금흐름(Free Cash Flow) 분석)

  • Lee, Joo-Young;Jang, Ha-eun;Kim, Kyong-Beom;Noh, Jin-Won
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.10
    • /
    • pp.510-521
    • /
    • 2020
  • Recently, transparency in accounting for medical institutions has been emphasized. However, due to the current system problems and structural limitations, there is a lack of diagnosis on the financial status of domestic hospitals. This study is based on the financial statements per 100 beds of 374 including domestic hospital level to tertiary hospital, and analyzed the Free Cash Flow(FCF) by hospital size from the perspective of Free Cash Flow Hypothesis. After deriving Operating Cash Flow(OCF) through the profit or loss statement of medical institutions, FCFs were analyzed through the prior and current financial statements and OCFs, and the correlation between financial variables was confirmed. According to the analysis, first, hospitals with 160 to 299 beds and 300 beds or more have relatively high FCFs. Second, certified tertiary hospitals, hospitals with less than 160 beds, and general hospitals have negative(-) FCFs. Thus, there's a need to narrow the FCF gap based on the size of the hospital, maintaining an appropriate level of FCF. This study is meaningful in that it was the first FCF analysis based on hospital size. This study is also expected to offer an informative resources in setting differentiated strategies according to the size of medical institutions when establishing new accounting policies in the future.

Comparison of microleakage after load cycling for nanofilled composite resin fillings with or without flowable resin lining (Nanofilled 복합레진으로 와동 충전 시 flowable 레진 사용 유무에 따른 피로시험 후의 미세 변연 누출 비교)

  • Han, Sun-Deok;Kim, Won;Choi, Ji-Young;Oh, Nam-Sik;Lee, Myung-Hyun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.47 no.3
    • /
    • pp.342-347
    • /
    • 2009
  • Statement of problem: when using resin for class II restoration, micoleakage by instrumentation can be regarded as the primary negative characteristic. A review of the available literature suggests that using flowable resin as liner to decreased microleakage. Purpose: The aim of this study was to determine the influence of the nanofilled flowable resin lining on marginal microleakage after load cycling in class II composite restoration fillings using nanofiller resin. Material and methods: 24 extracted premolars were prepared with class II cavity. F group was restored the nanofilled resin with the nanofilled flowable resin as liner. NF group was restored the nanofilled resin only. After restoration, an experiment was performed on 2 groups using a 300N load at 104, 105 and 106 cycles. Prior to and before each load cycling, it was gauged length on total marginal microleakage, axial marginal microleakage and buccal, gingival, lingual marginal microleakage. Data were analyzed with the Mann-Whitney test & Kruskal-Wallis test. Results: There were statistically significant differences between 2 groups and between individual groups. (P <.05) The result showed less microleakage in teeth restored by the nanofilled resin, which was lined by the nanofilled flowable resin. Conclusion: There was significant reduction in microleakage when the nanofilled flowable resin lining was placed underneath the nanofilled resin in class II composite restoration fillings.

EFFECT OF SURFACE MODIFICATION ON BOND STRENGTH IN TITANIUM-PORCELAIN SYSTEM (티타늄의 표면처리 방법에 따른 저온소성도재와의 결합강도)

  • Roh, Sung-Wook;Vang, Mong-Sook;Yang, Hong-So;Park, Sang-Won;Park, Ha-Ok;Lim, Hyun-Pil
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.45 no.5
    • /
    • pp.589-600
    • /
    • 2007
  • Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid. Results : Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut. Conclusion: In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.

The characteristics of Pacioli's Bookkeeping (파치올리 부기론의 특성에 관한 고찰)

  • Yoon Seok-Gon
    • Journal of the Korea Society of Computer and Information
    • /
    • v.10 no.3 s.35
    • /
    • pp.297-306
    • /
    • 2005
  • Compendium of arithmetic, geometry, and proportions and proportionality' that was published in Venice in 1494 has been recognized as the first bookkeeping data in the world. Major characteristics of Pacioli's bookkeeping rules were reviewed in this study as follows: All the necessary particulars for double entry bookkeeping were provided in Pacioli's bookkeeping rules;. List of property was described at the time of start of business; Three major books were used; Details of daily transactions were considered to be important; Strike through was lined at each description in journal books, details of daily transactions, and list of property after entry of ledger; Amount columns were provided and Arabic numerals were used; Annual settlement custom was being initiated; Profit and loss account was prepared at year-end; Trial balance sheet was inevitably described; Books were verified prior to closing accounts; Control account was not established; Financial statements were not prepared and business analysis was made, too; Finished goods inventory was not adjusted; Mark was assigned to books; Inter-office account was prepared; Branch accounts and branch ledgers were prepared; There was entries of trust; Current arrangement was described; The principle 'Cost or market price, whichever is lower basis' was promoted: Petty cash system is explained Checks and bills of exchange are used in bank account. As mentioned, characteristics of Pacioli's bookkeeping rules were reviewed; the signs of necessity for preparation of profit and loss statement and balance sheet is found as well as preparation of trial balance sheet and the rules may be considered as a very excellent one in terms of the bookkeeping on initiating stage of double entry bookkeeping.

  • PDF

Effective Coastal Water Quality Management and Marine Environmental Impact Assessment (연안의 효율적 수질관리 방향과 해양환경영향평가)

  • Lee, Dae-In;Eom, Ki-Hyuk;Kim, Gui-Young;Hong, Sok-Jin;Lee, Won-Chan;Jang, Ju-Hyoung
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.14 no.1
    • /
    • pp.29-37
    • /
    • 2008
  • This study examined principles and techniques of efficient water quality management as well as total coastal pollutant loads and the relevant examples in the advanced countries from the viewpoints of water quality improvement and pollution control in coastal areas. The problems and improvements in an estimation of the current total pollutant loads were also pointed out. In addition, discussion was made on the relationship between total pollutant loads and environmental capacity as well as particulars requiring extensive examination on access to and study on water quality model used as prediction tool for marine environment. Furthermore, this study proposed details of and improvement plans for water quality control to be reflected and absorbed into systems and policies related to coastal water quality. In coastal areas, which are subject to total coastal pollutant loads, it is necessary to calculate pollutant loads reduction and allocation, to propose them in detail in statement in relations to new pollution sources for the corresponding projects or plans in environmental impact assessment and prior environmental review system. Also, in relations to regional plans for coastal management, the local government concerned must focus more on environmental management plan to implement data on pollution sources and pollutant loads flown into sea areas under basic jurisdiction, therefore it is required to actively respond to expansion and introduction of total coastal pollutant loads system in the future. Total coastal pollutant loads system must be expanded and executed by considering characteristics of sea area and changes in the environment of land. For pollution sources in land, the competent authorities in charge of coastal environment will need to initiatively administer supervision, monitoring activities and achieve integration and operation of the related laws by preparing legal bases for management system or adjusting the related laws.

  • PDF

The micro-tensile bond strength of two-step self-etch adhesive to ground enamel with and without prior acid-etching (산부식 전처리에 따른 2단계 자가부식 접착제의 연마 법랑질에 대한 미세인장결합강도)

  • Kim, You-Lee;Kim, Jee-Hwan;Shim, June-Sung;Kim, Kwang-Mahn;Lee, Keun-Woo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.46 no.2
    • /
    • pp.148-156
    • /
    • 2008
  • Statement of problems: Self-etch adhesives exhibit some clinical benefits such as ease of manipulation and reduced technique-sensitivity. Nevertheless, some concern remains regarding the bonding effectiveness of self-etch adhesives to enamel, in particular when so-called 'mild' self-etch adhesives are employed. This study compared the microtensile bond strengths to ground enamel of the two-step self-etch adhesive Clearfil SE Bond (Kuraray) to the three-step etch-and- rinse adhesive Scotchbond Multi-Purpose (3M ESPE) and the one-step self-etch adhesive iBond (Heraeus Kulzer). Purpose: The purpose of this study was to determine the effect of a preceding phosphoric acid conditioning step on the bonding effectiveness of a two-step self-etch adhesive to ground enamel. Material and methods: The two-step self-etch adhesive Clearfil SE Bond non-etch group, Clearfil SE Bond etch group with prior 35% phosphoric acid etching, and the one-step self-etch adhesive iBond group were used as experimental groups. The three-step etch-and-rinse adhesive Scotchbond Multi-Purpose was used as a control group. The facial surfaces of bovine incisors were divided in four equal parts cruciformly, and randomly distributed into each group. The facial surface of each incisor was ground with 800-grit silicon carbide paper. Each adhesive group was applied according to the manufacturer's instructions to ground enamel, after which the surface was built up using Light-Core (Bisco). After storage in distilled water at $37^{\circ}C$ for 1 week, the restored teeth were sectioned into enamel beams approximately 0.8*0.8mm in cross section using a low speed precision diamond saw (TOPMET Metsaw-LS). After storage in distilled water at $37^{\circ}C$ for 1 month, 3 months, microtensile bond strength evaluations were performed using microspecimens. The microtensile bond strength (MPa) was derived by dividing the imposed force (N) at time of fracture by the bond area ($mm^2$). The mode of failure at the interface was determined with a microscope (Microscope-B nocular, Nikon). The data of microtensile bond strength were statistically analyzed using a one-way ANOVA, followed by Least Significant Difference Post Hoc Test at a significance level of 5%. Results: The mean microtensile bond strength after 1 month of storage showed no statistically significant difference between all adhesive groups (P>0.05). After 3 months of storage, adhesion to ground enamel of iBond was not significantly different from Clearfil SE Bond etch (P>>0.05), while Clearfil SE Bond non-etch and Scotchbond Multi-Purpose demonstrated significantly lower bond strengths (P<0.05), with no significant differences between the two adhesives. Conclusion: In this study the microtensile bond strength to ground enamel of two-step self-etch adhesive Clearfil SE Bond was not significantly different from three-step etch-and-rinse adhesive Scotchbond Multi-Purpose, and prior etching with 35% phosphoric acid significantly increased the bonding effectiveness of Clearfil SE Bond to enamel at 3 months.

A Prospective Randomized Comparative Clinical Trial Comparing the Efficacy between Ondansetron and Metoclopramide for Prevention of Nausea and Vomiting in Patients Undergoing Fractionated Radiotherapy to the Abdominal Region (복부 방사선치료를 받는 환자에서 발생하는 오심 및 구토에 대한 온단세트론과 메토클로프라미드의 효과 : 제 3상 전향적 무작위 비교임상시험)

  • Park Hee Chul;Suh Chang Ok;Seong Jinsil;Cho Jae Ho;Lim John Jihoon;Park Won;Song Jae Seok;Kim Gwi Eon
    • Radiation Oncology Journal
    • /
    • v.19 no.2
    • /
    • pp.127-135
    • /
    • 2001
  • Purpose : This study is a prospective randomized clinical trial comparing the efficacy and complication of anti-emetic drugs for prevention of nausea and vomiting after radiotherapy which has moderate emetogenic potential. The aim of this study was to investigate whether the anti-emetic efficacy of ondansetron $(Zofran^{\circledR})$ 8 mg bid dose (Group O) is better than the efficacy of metoclopramide 5 mg lid dose (Group M) in patients undergoing fractionated radiotherapy to the abdominal region. Materials and Methods : Study entry was restricted to those patients who met the following eligibility criteria: histologically confirmed malignant disease; no distant metastasis; performance status of not more than ECOG grade 2; no previous chemotherapy and radiotherapy. Between March 1997 and February 1998, 60 patients enrolled in this study. All patients signed a written statement of informed consent prior to enrollment. Blinding was maintained by dosing identical number of tablets including one dose of matching placebo for Group O. The extent of nausea, appetite loss, and the number of emetic episodes were recorded everyday using diary card. The mean score of nausea, appetite loss and the mean number of emetic episodes were obtained in a weekly interval. Results : Prescription error occurred in one patient. And diary cards have not returned in 3 patients due to premature refusal of treatment. Card from one patient was excluded from the analysis because she had a history of treatment for neurosis. As a result, the analysis consisted of 55 patients. Patient characteristics and radiotherapy characteristics were similar except mean age was $52.9{\pm}11.2$ in group M, $46.5{\pm}9.5$ in group O. The difference of age was statistically significant. The mean score of nausea, appetite loss and emetic episodes in a weekly interval was higher in group M than O. In group M, the symptoms were most significant at 5th week. In a panel data analysis using mixed procedure, treatment group was only significant factor detecting the difference of weekly score for all three symptoms. Ondansetron $(Zofran^{\circledR})$ 8 mg bid dose and metoclopramide 5 mg lid dose were well tolerated without significant side effects. There were no clinically important changes In vital signs or clinical laboratory parameters with either drug. Conclusion : Concerning the fact that patients with younger age have higher emetogenic potential, there are possibilities that age difference between two treatment groups lowered the statistical power of analysis. There were significant difference favoring ondansetron group with respect to the severity of nausea, vomiting and loss of appetite. We concluded that ondansetron is more effective anti-emetic agents in the control of radiotherapy-induced nausea, vomiting, loss of appetite without significant toxicity, compared with commonly used drug, i.e., metoclopramide. However, there were patients suffering emesis despite the administration of ondansetron. The possible strategies to improve the prevention and the treatment of radiotherapy-induced emesis must be further studied.

  • PDF

Seeking a Better Place: Sustainability in the CPG Industry (추심경호적지방(追寻更好的地方): 유포장적소비품적산업적가지속발전(有包装的消费品的产业的可持续发展))

  • Rapert, Molly Inhofe;Newman, Christopher;Park, Seong-Yeon;Lee, Eun-Mi
    • Journal of Global Scholars of Marketing Science
    • /
    • v.20 no.2
    • /
    • pp.199-207
    • /
    • 2010
  • For us, there is virtually no distinction between being a responsible citizen and a successful business... they are one and the same for Wal-Mart today." ~ Lee Scott, al-Mart CEO after the 2005 Katrina disaster; cited in Green to Gold (Esty and Winston 2006). Lee Scott's statement signaled a new era in sustainability as manufacturers and retailers around the globe watched the world's largest mass merchandiser confirm its intentions with respect to sustainability. For decades, the environmental movement has grown, slowly bleeding over into the corporate world. Companies have been born, products have been created, academic journals have been launched, and government initiatives have been undertaken - all in the pursuit of sustainability (Peattie and Crane 2005). While progress has been admittedly slower than some may desire, the emergence and entrance of environmentally concerned mass merchandisers has done much to help with sustainable efforts. To better understand this movement, we incorporate the perspectives of both executives and consumers involved in the consumer packaged goods (CPG) industry. This research relies on three underlying themes: (1) Conceptual and anecdotal evidence suggests that companies undertake sustainability initiatives for a plethora of reasons, (2) The number of sustainability initiatives continues to increase in the consumer packaged goods industries, and (3) That it is, therefore, necessary to explore the role that sustainability plays in the minds of consumers. In light of these themes, surveys were administered to and completed by 143 college students and 101 business executives to assess a number of variables in regards to sustainability including willingness-to-pay, behavioral intentions, attitudes, willingness-to-pay, and preferences. Survey results indicate that the top three reasons why executives believe sustainability to be important include (1) the opportunity for profitability, (2) the fulfillment of an obligation to the environment, and (3) a responsibility to customers and shareholders. College students identified the top three reasons as (1) a responsibility to the environment, (2) an indebtedness to future generations, and (3) an effective management of resources. While the rationale for supporting sustainability efforts differed between college students and executives, the executives and consumers reported similar responses for the majority of the remaining sustainability issues. Furthermore, when we asked consumers to assess the importance of six key issues (healthcare, economy, education, crime, government spending, and environment) previously identified as important to consumers by Gallup Poll, protecting the environment only ranked fourth out of the six (Carlson 2005). While all six of these issues were identified as important, the top three that emerged as most important were (1) improvements in education, (2) the economy, and (3) health care. As the pursuit and incorporation of sustainability continues to evolve, so too will the expected outcomes. New definitions of performance that reflect the social/business benefits as well as the lengthened implementation period are relevant and warranted (Ehrenfeld 2005; Hitchcock and Willard 2006). We identified three primary categories of outcomes based on a literature review of both anecdotal and conceptual expectations of sustainability: (1) improvements in constituent satisfaction, (2) differentiation opportunities, and (3) financial rewards. Within each of these categories, several specific outcomes were identified resulting in eleven different outcomes arising from sustainability initiatives. Our survey results indicate that the top five most likely outcomes for companies that pursue sustainability are: (1) green consumers will be more satisfied, (2) company image will be better, (3) corporate responsibility will be enhanced, (4) energy costs will be reduced, and (5) products will be more innovative. Additionally, to better understand the interesting intersection between the environmental "identity" of a consumer and the willingness to manifest that identity with marketplace purchases, we extended prior research developed by Experian Research (2008). Accordingly, respondents were categorized as one of four types of green consumers (Behavioral Greens, Think Greens, Potential Greens, or True Browns) to garner a better understanding of the green consumer in addition to assisting with a more effective interpretation of results. We assessed these consumers' willingness to engage in eco-friendly behavior by evaluating three options: (1) shopping at retailers that support environmental initiatives, (2) paying more for products that protect the environment, and (3) paying higher taxes so the government can support environmental initiatives. Think Greens expressed the greatest willingness to change, followed by Behavioral Greens, Potential Greens, and True Browns. These differences were all significant at p<.01. Further Conclusions and Implications We have undertaken a descriptive study which seeks to enhance our understanding of the strategic domain of sustainability. Specifically, this research fills a gap in the literature by comparing and contrasting the sustainability views of business executives and consumers with specific regard to preferences, intentions, willingness-to-pay, behavior, and attitudes. For practitioners, much can be gained from a strategic standpoint. In addition to the many results already reported, respondents also reported than willing to pay more for products that protect the environment. Other specific results indicate that female respondents consistently communicate a stronger willingness than males to pay more for these products and to shop at eco-friendly retailers. Knowing this additional information, practitioners can now have a more specific market in which to target and communicate their sustainability efforts. While this research is only an initial step towards understanding similarities and differences among practitioners and consumers regarding sustainability, it presents original findings that contribute to both practice and research. Future research should be directed toward examining other variables affecting this relationship, as well as other specific industries.