• 펄프종이기술
• /
• 제31권5호
• /
• pp.18-23
• /
• 1999

This study examined the effects of multiple recycling on deinkability and properties of recycled paper from laser computer printout(LCPO). First, alkaline paper with a 20% printed area was disintegrated by TAPPI standard disintegrator. After dewatering , the pulp was followed by flotation, handsheet making, and drying at room temperature, in order. A sequence of printing , disintegrating, flotating , handsheet making and drying was one recycling cycle and this cyclic treatment was repeateed from zero to five times. The residual ink content in recycled handsheets by SEM-EDXA and Py-GC analyseswas increased slightly as recycling number increase. After five cycles of recycling the ISO brightness of recycled handsheets dropped to about 90% of the original brightness. However, it had a gain of 10% in opacity. The most of physical properties of recycled handsheets were decreased as recycling numbers increase except of for tear strength.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1422-1427
• /
• 2007

MR fluid is a suspension of micrometer-sized magnetizable particles in silicon oil and a functional fluid whose apparent viscosity can be controlled by the applied magnetic field strength. In this paper, a rotary brake using MR fluid called MR brake for tension control of precision machinery such as roll-to-roll printing machinery is presented. First, to obtain the higher performance than conventional powder brake, a MR brake with a modified rotor shape is newly designed and analyzed using FEM. Second, the prototype of MR brake is fabricated with the optimized structural parameters and an experimental apparatus is constructed. Then, basic characteristics of the MR brake are investigated with the different MR fluids. Finally, the validity of the developed MR brake is verified through the comparison with the conventional powder brake.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1881-1883
• /
• 2001

We manufactured a micro CPL by LlGA process, a new conceptual ultra-fine and precise forming method, using X-ray lithography process. We fabricated a BN X-ray mask having properties of good X-ray transmittance and large mechanical strength. Micro CPL was manufactured by dividing into an upper plate and a low plate. Each of plates was bonded by Ag paste screen printing. The upper plate was fabricated on glass wafer to observe flow and phase transformation of cooling solution. The lower plate was manufactured by Cu electroplating for good heat transmission. Precision of inner Parts, micro pin and micro channel, of manufactured micro CPL is under ${\pm}2{\mu}m$.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.73-79
• /
• 2008

The permanence is of great importance to library and archival paper. According to the established standardizations including ISO and ANSI, the permanence can be specified with tear strength, pH, alkali reserve and kappa number. In this study, we evaluated the permanence and durability of domestic coated and copy paper grades. Two types of coated paper grades and all kinds of copy papers which were tested in this study were satisfied with the criterion of permanence specification. However, all of the tested paper grades didn't meet the requirements of durability because of their low folding endurance.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.127-134
• /
• 2007

Paper is composed network of fibers. Since paper is plain, most cases paper is considered two-dimensional. But network of fibers creates a network of pores, and pores between fibers are most important part of the paper structure. So we have to make an approach to the paper by three-dimensionally. Pore structure in the Z-direction of the paper can affect directly not only basic properties od the paper such as density, porosity, opacity and strength but also coverage of the coating colors during coatong and printing properties. We studied effect of raw materials of the papermaking and physical treatment on the pore structure and properties of the paper.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.81-86
• /
• 2000

Hanji is a traditional handmade paper, which has been famous for its excellent qualities in strength, whiteness, gloss, and smooth feel in painting and writing in ancient Far East for many years. Nowadays, however, its old fame has declined and it has been used only in limited extent such as in traditional Korean brush painting and writing. In this study, 9 kinds of commercial handmade papers made in Korea, China, and Japan were collected and their printing and writing properties were evaluated by image analysis. Chinese handmade paper showed the best result in absorption area of China ink, the roundness and feathering of China ink blots, followed by Hanji. Abrasion coefficient of the Chineses papers was higher than that of the others, which was regarded to contribute to the difference in touch feeling of the writing brush on the papers. It was shown that absorption rate and blot area of China ink were increased by Dochim. Hanji which has recently been made by so called \"traditional method\" showed no quality difference from the modified Hanji.ied Hanji.

• Journal of Forest and Environmental Science
• /
• 제8권1호
• /
• pp.67-76
• /
• 1992

The effects of HwBCTMP on the characteristics of paper were compared with those of HwBKP. The fiber fraction below 0.1 mm of HwBCTMP was higher than those of HwBKP. HwBCTMP was superior to the HwBKP in the improvement of opacity, apparent density and smoothness, and in the decrease of air permeability. The strength properties and stiffness obtained with the addition of HwBCTMP were better than those of HwBKP. Therefore, HwBCTMP might not only be well substituted for HwBKP but also decrease production cost and improve paper properties.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.25-30
• /
• 2007

Recently the use of web offset printing has been increasing, which can provide high print speed, mass production, and high print quality. However, high speed web offset printing has frequently undergone a blistering problem when the printed paper passes through hot air dryers. Blistering occurs in the middle of the base paper or in the coating layer. This paper focused on the blistering occurring in the base paper. In order to elucidate the effect of pigment ratio on blistering, 6 types of coating color were prepared with varying GCC/clay ratios and printability and blistering were investigated focusing on structure changes in the coating layer. When the clay content in the coating layer was increased, surface roughness and surface strength were decreased and paper gloss was increased. In addition, it was found that the coating layer structure with high clay content, which contains lots of discontinuous pores, hindered water vapors to penetrate out and, as a result, blistering occurred.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1081-1086
• /
• 2008

양자 점을 이용한 QD-LED(Quantum Dot - Light Emitting Device)의 소자 제작을 하기 위해서는 양자 점의 균일한 배열이 중요하다. 핵-껍질(core-shell) 구조의 CdSe/ZnS 양자 점을 기판에 고 밀도, 고 균일도로 배열하기 위하여 두 종류의 분자 끈(molecular linker)을 사용하였고, 공정의 단순화와 비용 절감을 위하여 고분자 도장인 PDMS(polydimethylsiloxane)를 이용한 미세접촉인쇄방법으로 양자 점들을 배열하였다. $TiO_2/ITO$ 기판에 양자 점을 고정시켜주는 역할을 하는 분자 끈으로는 2-carboxyethylphosphonic acid(CAPO)를 사용하였고, 양자 점 사이의 인력을 향상시켜주는 분자 끈으로는 1,6-hexanedithiol(HDT)을 사용하였다. 양자 점들의 배열 특성을 주사전자현미경(SEM, scanning electron microscope)과 원자 힘 현미경(AFM, atomic force microscope)으로 분석하였고, 광 발광분광기(PL, photoluminescence spectroscope)로 발광특성을 측정하였다.

• 한국세라믹학회지
• /
• 제39권12호
• /
• pp.1153-1157
• /
• 2002

입도가 다른 두 가지 고순도 ${\alpha}-Al_2O_3$ 분말을 이용하여 slip casting법과 담금코팅(dip coating)법으로 다공질 알루미나 지지체와 중간층을 각각 제조하였으며, 그 위에 분리막인 산화티탄($Tio_2$)층을 Ti-naphthenate용액으로 screen printing한 후 열분해시켜 형성시킴으로써, 3층 구조의 비대칭성 세라믹 분리막을 제조하였다. 알루미나 지지체의 곡강도, 기공율 및 평균 기공크기는 각각 231 Kg/$cm^2$, 30.26%, 0.19 ${mu}m$였으며, 중간층은 두께가 약 30 ${mu}m$, 평균 기공크기가 0.063 ${mu}m$였다. 또한 최상층 $Tio_2$ 분리막은 그 두께가 약 0.5 ${mu}m$였으며 평균 약 20 nm 정도의 미세 기공들이 매우 균일하게 형성되어 있었다.