• 마이크로전자및패키징학회지
• /
• 제9권2호
• /
• pp.55-60
• /
• 2002

전자제품의 경박단소화는 관련 부품들의 개별적인 소형화, 경량화 또는 여러 가지 부품들을 집적시켜 모듈화 시키는 것을 요구한다. 최근에는 실장밀도를 향상시키기 위하여 저항, 축전기, 인덕터 등의 수동소자들을 다층인쇄회로기판에 내장시키고자 하는 연구들이 널리 수행되고 있다. 본 고에서는 먼저 여러 가지 수동소자들의 기능을 살펴본 후, 수동소자들을 기판에 내장시키고자 하는 연구의 필요성과 이 기술을 상업화하기 위하여 앞으로 해결해야 할 문제들에 관하여 살펴보고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1555-1558
• /
• 2005

In this study, we measured cylindricity and Runout of the air bearing spindle, and tested PCB(printed circuit boards) drilling with 0.4mm micro drill at 90,000rpm and 110,000rpm in order to obtain drilling hole error. Results are as follows; The air bearing spindle's Runout was not so high within $10\mu{m}$ from 20,000rpm to 80,000rpm but it grew after 80,000rpm. Drilling hole size error was 9% at 80,000rpm and 12% at 110,000rpm because of spindle's Run out. Drilled hole shape falsified more 110,000rpm than 90,000rpm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1609_1610
• /
• 2009

LED는 광학특성을 유지하기 위해서 최적의 방열설계가 요구된다. 이 논문에서는 입력FR-4의 Top Layer의 면적을 506.25[$mm^2$]이상으로 확대함으로써, 인가 전력 0.5W 조건하에서 FR-4 PCB로 MCPCB와 유사한 방열 특성을 발휘할 수 있음을 열화상카메라를 통한 측정 및 전산모사를 이용하여 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.995-1000
• /
• 1999

This paper presents a optic system and a visual inspection algorithm looking for solder joint defects of J-lead chip which are more integrate and smaller than ones with Gull-wing on PCBs(Printed Circuit Boards). The visual inspection system is composed of three sections : host PC, imaging and driving parts. The host PC part controls the inspection devices and executes the inspection algorithm. The imaging part acquires and processes image data. And the driving part controls XY-table for automatic inspection. In this paper, the most important five features are extracted from input images to categorize four classes of solder joint defects in the case of J-lead chip and utilized to a back-propagation network for classification. Consequently, good accuracy of classification performance and effectiveness of chosen five features are examined by experiment using proposed inspection algorithm.

• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.416-419
• /
• 2016

전자 회로의 집적도와 동작 주파수가 증가함에 따라 신호 전달 특성을 향상시키는 것이 중요하다. 본 논문에서는 인쇄 회로 기판에서 패드의 곡률 변화에 따른 신호 전달 특성을 분석하였다. 시뮬레이션 결과, 곡률이 커질수록 신호 전달 특성은 개선되었고, 전송선로의 두께가 얇을수록 곡률 변화에 더 적은 영향을 받으며, 길이가 짧을수록 곡률 변화에 더 큰 영향을 받는 것을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.1-11
• /
• 1999

The three-dimensional laminar mixed convection flow between the conductive printed circuit boards. on which the heat generating rectangular blocks are uniformly distributed, has been examined in the present study. The flow and heat-transfer characteristics are assumed to be pseudo periodic in the streamwise direction and symmetric in the cross-stream direction. Using an algorithm of SIMPLER, the continuity equation. the Navier-Stokes equations and the energy equation are solved numerically in the three-dimensional domain Inside the channel. The convective derivative terms are discretized by the QUICK scheme to accurately capture the flow field. The flow and the heat transfer characteristics are thoroughly examined for various Re and Gr.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.561-564
• /
• 2006

Because of new requirements related to the employment of SMT(Surface Mounting Technology) manufacturing and the diversity of components on high density PCB(printed circuit boards), Thermal control of the reflow process is required in oder to achieve acceptable yields and reliability of SMT assemblies. Accurate control of the temperature distribution during the reflow process is one of the major requirements, especially in lead-free assembly. This study has been performed for reflow process using the commercial CFD tool(Fluent) for predicting flow and temperature distributions. There was flow recirculation region that had a weak point in the temperature uniformity. Porous plate was installed to prevent and minimize flow recirculation region for acquiring uniform temperature in oven. This paper provided design concept from CFD results of the steady state temperature distribution and flow field inside a reflow oven.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.275-280
• /
• 2001

Recently, the trends of industrial products grow more miniaturization, variety and mass production. Micro drilling which take high precision in cutting work is requested more micro hole and high speed working. Especially, Micro deep hole drilling is becoming more important in a wide spectrum of precision production industries, ranging from the production of automotive fuel injection nozzle, watch and camera parts, medical needles, and thick multi-layered Printed Circuit Boards(PCB) that are demanded for very high density electric circuitry. This paper shows the tool monitoring results of micro drill with tool dynamometer. And additionally, microscope with built-in monitor inspection show the relationship between burr in workpiece and chip form of micro drill machining.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.46-54
• /
• 2003

The thermal response of electronic assemblies during forced convection-infrared reflow soldering is studied. Soldering for attaching electronic components to printed circuit boards is performed in a process oven that is equipped with porous panel heaters, through which air is injected in order to dampen temperature fluctuations in the oven which can be established by thermal buoyancy forces. Forced convection-infrared reflow soldering process with air injection is simulated using a 2-dimensional numerical model. The multimode heat transfer within the reflow oven as well as within the electronic assembly is simulated. Parametric study is also performed to study the effects of various conditions such as conveyor speed, blowing velocity, and electronic assembly emissivity on the thermal response of electronic assemblies. The results of this study can be used in the process oven design and selecting the oven operating conditions to ensure proper solder melting and solidification.

• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.406-414
• /
• 1997

A real-time inspection system is developed using line scan cameras. Several improved algorithms are proposed for real-time detection of defects in this automated inspection system. The major improved algorithms include the preprocessing, the threshold decision, and the clustering algorithms. The preprocessing algorithms are for exact binarization and the threshold decision algorithm is for fast detection of defects in 1-D binary images. The clustering algorithm is also developed for fast classifying of the defects. The system is applied to PCBs(Printed Circuit Boards) inspection. The typical defects in PCBs are pits, dent, wrinkle, scratch, and black spots. The results show that most defects are detected and classified successfully.