• Journal of Information Technology Services
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2011

In this paper, we consist of three dimensional acceleration sensor as a small-sized sensor module to acquire base technologies that need to estimate exhibition audience' moving distance. and that we developed algorism and device that can calculate acceleration in gravity direction with attaching it to people's body part without regard to three dimensional direction. By making use of the sensor module, we have to process the data that let it quantitatively process possible to measure people's walk and movement by computer system. We normalized sensor output data in the process of change from sensor module to acquisition of data, rectangular coordinates and single scalar acceleration value in gravity direction. Printed out sensor data attaching sensor module to people's body part is used for motion pattern detection after normalization, Motion sensor devised mode change algorism because it print data of other pattern according to attached position of body. For algorism design, we collected data occurring during walking about subject and we also defined occurring problem domain after analyzing the data. We settle defined problem domain and that we simulated the walking number measuring instrument with highly efficient in restricted environment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.15-22
• /
• 2008

For the improvement of letterpress printing paper quality, special fibers obtained from the sea were used by mixing with wood fibers. The sizes of the special fibers, which were from red algae in the sea, were 0.5-1 mm in length, and 3-7 ${\mu}m$ in width, respectively, and the fibers were supplied by Pegasus Research Inc. for the study. From the study, it was found that 10% addition of algae fibers greatly improved paper surface strength and internal bonding strength. The compressibility was estimated by utilizing 'Print-surf method' at high clamping pressure and with hard backing. Again, 10% addition of algae fibers greatly improved the compressibility of the paper. These results were expected that algae and wood fibers were distributed evenly through the sheet, and integrated one another to leave no empty space inside the paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.8-12
• /
• 2009

According to a previous study, talc as a coating pigment can improve the viscosity and the water retention of coating color, the compressibility of coating layer, and hence gravure printability. Talc is also well known for its larger particle size than other pigments, which implies that less binder may be need due to its smaller specific surface area. This study investigated the possibility of reducing binder content for matte grade paper. Coating color was prepared with the Cotalc-2000, which showed the best properties in the previous study. The binder content was varied and the effect of binder content on the physical properties of coated paper and the gravure printability was investigated. It was shown that binder content could be reduced when talc was used as a coating pigment. The reduction in binder content did not influence gloss, roughness and the print density of coated paper but showed improvement in paper porosity, compressibility and missing dot.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.240-244
• /
• 2020

A grip impression is evidence of contact between the assailant and victim in a case. The shape of the grip impression can be analyzed to reconstruct which part of the palm it contacted. This study explored whether the grip impression left on cotton, nylon, and polyester fabrics can be identified by vacuum metal deposition (VMD). The latent grip impression developed by VMD had limitations in personal identification, but a new possibility was found that could be used as evidence for crime-scene reconstruction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.963-986
• /
• 2022

This article surveys the fashion forecasting industry in Korean domestic markets. With the rise of new media and devices with high technology, the paradigm of fashion trends forecasting systems has dramatically changed. New perspectives of trend forecasting are required to understand the trend flow and consumer behavior of the MZ generation. The research questions are as follows: 1) Major trend forecasting companies studied the development of their strategies and new forecasting methods. 2) The consumers' needs in the domestic market were analyzed. The influence of the trend companies' forecasting on the market was investigated. The results are as follows: 1) International trend forecasting significantly affected the domestic market. The concordance rate between consumers' online searches about fashion trends was approximately 70.14%. The match rate by category is as follows: The highest rate, 85.06% is from pattern and print, color is 83.92%, the item is 80.39%, and style is 54.32%. 2) Specialized information such as the Pantone color chart is being widely consumed, leading to a trend among the masses. 3) The Korean-specific socio-cultural background has an impact on domestic trends.

• Structural Engineering and Mechanics
• /
• v.86 no.4
• /
• pp.431-441
• /
• 2023

The aim of this paper is to present a new sustainable ternary and quaternary binder by partially replacing ordinary Portland cement (OPC) with different percentages of supplementary cementitious materials. The motivation is to reduce our dependency on OPC to reduce CO₂ emission and carbon foot print. As the main substitute for the OPC, siliceous fly ash was used. Moreover, silica fume and nanosilica were also used. During examinations the main mechanical parameters of concrete composites, i.e., compressive strength (f_cm) and splitting tensile strength (f_ctm) were assed. The microstructure of these materials was also analysed. It was found that the concrete incorporating pozzolanic materials is characterized by a well-developed structure and has high values of mechanical parameters. The quaternary concrete containing: 80% OPC, 5% FA, 10% SF, and 5% nS have shown the best results in terms of good strength parameters as well as the most favourable microstructure, whereas the worst mechanical parameters with microstructure containing microcracks at phase interfaces were characterized by concrete with more content of FA additive in the concrete mix, i.e., 15%. Nevertheless, all concretes made on quaternary binders had better parameters than the reference one. It can be stated that sustainable concrete incorporating pozzolanic materials could be good substitute of ordinary concretes.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.9
• /
• pp.1-12
• /
• 2017

This study is the academic work to explore the potential meanings of print advertisements. Linguistic features such as repetition, variation, contrast and phonological structure in the verbal texts of ads can give rise to shades-of-meaning or slight variations in advertising. The language of advertising is not only language in words. It is also a language in images, colors, and pictures. Pictures and words combine to form the advertisement's visual text.. While the words are very important in delivering the sales message, the visual text cannot be ignored in advertisements. Forming part of the visual text is the paralanguage of the ad. Paralanguage is the meaningful behaviour accompanying language, such as voice quality, gestures, facial expressions and touch in speech, and choice of typeface and letter sizes in writing. Foregrounding is the throwing into relief of the linguistic sign against the background of the norms of ordinary language. This paper focuses its discussion on the advertisements within the framework of the paradigmatic and the syntagmatic relationship. The sources of ads have been confined to Malboro. The ads were reselected based on purposive sampling methods.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.78.2-78.2
• /
• 2019

The temperature control of a scientific device is essential because extreme temperature conditions can cause hazard issues for the operation. We developed a software which can interact with the temperature sensor using the GMT SDK(Giant Magellan Telescope Software Development Kit) version 1.6.0. The temperature sensor interacts with the EtherCAT(Ethernet for Control Automation Technology) slave via the hardware adapter, sending and receiving data by a packet. The PDO(Process Data Object) and SDO(Service Data Object), which are the packet interacts with each EtherCAT slave, are defined on the TwinCAT program that enables the real-time control of the devices. The user can receive data from the device via grs(GMT Runtime System) tools and log service. Besides, we programmed the software to print an alert message on the log when the temperature condition changes to certain conditions.

• Journal of the Korean Society for information Management
• /
• v.40 no.4
• /
• pp.147-165
• /
• 2023

New technologies representing the Fourth Industrial Revolution are already being realized in library services. There is not, however, active research on measures to increase work efficiency by introducing a new technology in the work of "classification" that is part of the traditional librarian jobs they should continue in the future. The Dewey Decimal Classification (DDC) has not issued a print version since 2018. This study analyzes cases of WebDewey, Classification Web, and UDC Online. The functions required for the development of the Korean Decimal Classification (KDC) web version were derived, and the final functions suitable for the development of the KDC web version were proposed through AHP analysis.

• Journal of Korean Dental Science
• /
• v.17 no.1
• /
• pp.1-13
• /
• 2024

With the advances of digital scanning technology in dentistry, the interests in facial scanning in orthodontics have increased. There are many different manufacturers of facial scanners marketing to the dental practice. How do you know which one will work best for you? What questions should you be asking? We suggest a clinical guideline which may help you make an informed decision when choosing facial scanners. The characteristics of 7 facial scanners were discussed in this article. Here are some considerations for choosing a facial scanner. *Accuracy: For facial scanners to be of real value, having an appropriate camera resolution is necessary to achieve more accurate facial image representation. For orthodontic application, the scanner must create an accurate representation of an entire face. *Ease of Use: Scanner-related issues that impact their ease of use include type of light; scan type; scan time; file type generated by the scanner; unit size and foot print; and acceptance of scans by third-party providers. *Cost: Most of the expenses associated with facial scanning involve the fixed cost of purchase and maintenance. Other expenses include technical support, warranty costs, transmission fees, and supply costs. This article suggests a clinical guideline to make the right choice for facial scanner in orthodontics.