• 한국환경과학회지
• /
• 제29권6호
• /
• pp.633-641
• /
• 2020

Water temperature is one of the most important factors of fish survival, affecting the habitat, migration route, development, and reproduction. This experiment studied the induction level of heat shock protein (HSP70) mRNA and protein in a walleye pollock (Gadus chalcogrammus) primary hepatocyte culture based on different temperatures. Hepatocytes were attached at 7.5℃ for 24 hours. Hsp70 induction levels were then measured for 48 hours at 5, 8, 11, 14, and 17℃. The induction level was lowest at 5℃ and generally increased with temperature until 14℃. The induction level was reduced at 17℃, indicating that 14℃ is the highest tolerable temperature for hepatocytes. These data indicate that primary hepatocyte cell culture is under no stress at 5 and 8℃. Temperatures greater than 11℃ induce stress, showing similar induction patterns in both mRNA and protein in hepatocytes. The results suggest that 14℃ is the maximum internal defense temperature of walleye pollock survival.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.85-91
• /
• 2008

By operation in aqueous environment at high temperature and pressure, the structural materials from Primary Heat Transport System (PHTS) cover with protective oxide films, which maintain the corrosion rate in admissible limits. A lot of potential factors exist, which conduct to degradation of the protective films and consequently to intensification of the corrosion processes. The existing experience of different nuclear reactors shows that the water chemistry has an important role in integrity maintaining of the protective oxide films. To investigate the influence of water chemistry (pH, O2 dissolved, $Cl^-$, $F^-$) on corrosion of some structural materials (carbon and martensitic steel, Zr and Ni alloys) and to establish the maximum permissible values, corrosion experiments by static autoclaving and electrochemical methods were performed. The experimental results allowed us to establish the contribution of the water chemistry in initiation and evolution of some accelerated corrosion processes.

• Corrosion Science and Technology
• /
• 제18권1호
• /
• pp.33-38
• /
• 2019

Alloy 600/182 with excellent mechanical/chemical properties have been utilized for nuclear power plants. Although both alloys are known to have superior corrosion resistance, stress corrosion cracking failure has been an issue in primary water environment of nuclear power plants. Therefore, primary water stress corrosion crack (PWSCC) growth rate tests were conducted to investigate crack growth properties of Alloy 600/182. To investigate PWSCC growth rate, test facilities including water chemistry loop, autoclave, and loading system were constructed. In PWSCC crack growth rate tests, half compact-tension specimens were manufactured. These specimens were then placed inside of the autoclave connected to the loop to provide primary water environment. Tested conditions were set at temperature of $360^{\circ}C$ and pressure of 20MPa. Real time crack growth rates of specimens inside the autoclave were measured by Direct Current potential drop (DCPD) method. To confirm inter-granular (IG) crack as a characteristic of PWSCC, fracture surfaces of tested specimens were observed by SEM. Finally, crack growth rate was derived in a specific stress intensity factor (K) range and similarity with overseas database was identified.

• 공업화학
• /
• 제4권3호
• /
• pp.558-563
• /
• 1993

합성세제가 수질오염에 미치는 영향을 규명하기 위한 기초과정으로서 시판 주방용세제 3종을 대상으로 하여 1차적 생분해도와 최종적 생분해도를 측정하였다. 그 결과 대상시료의 1차적 생분해도는 한국공업규격(KS) 기준에 적합하였다. 그중에서도 1차적 생분해도가 빠른 제품이 최종적 생분해가 빠른 경향을 보였다.

• 천문학회보
• /
• 제36권2호
• /
• pp.105.1-105.1
• /
• 2011

We present the modeling results of deuterium fractionation of water ice, $H_2$, and the primary deuterium isotopologues of $H3^+$ in the physical conditions associated with the star and planet formation process. We calculated the deuterium chemistry for a range of gas temperatures (Tgas~10-30 K) and ortho/para ratio (opr ) of $H_2$ based on state-to-state reaction rates and explore the resulting fractionation including the formation of a water ice mantle coating grain surfaces. We find that the deuterium fractionation exhibits the expected temperature dependence of large enrichments at low gas temperature, but only for opr-H2<0.01. More significantly the inclusion of water ice formation leads to large D/H ratios in water ice (${\geq}10^{-2}$ at 10 K) but also alters the overall deuterium chemistry. For T<20 K the implantation of deuterium into ices lowers the overall abundance of HD which reduces the efficiency of deuterium fractionation at high density. Under these conditions HD will not be the primary deuterium reservoir in the cold dense interstellar medium and $H3^+$ will be the main charge carrier in the dense centers of pre-stellar cores and the protoplanetary disk midplane.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.208-208
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• 제2권2호
• /
• pp.60-66
• /
• 1981

The hypothesis that three classes of water exist in hydrogels, namely X water (free water-like), Z-water (bound water-like), and Y water (interfacial water-like), has been verified and generally accepted. To further check the validity of this hypothesis and to study the nature of X, Y, and Z water as conformation changes, several experiments have been done using Tactic Poly(2-hydroxyethyl methacrylate) (P-HEMA) gels. Thermal expansively data for tactic P-HEMA gel was obtained. In each case of isotactic and syndiotactic P-HEMA, the higher water content gels showed an extremely sharp volume change at $0^{\circ}C$, indicating the presence of normal free water-like. Lower water content gels showed no anomalous change in thermal expansion, indicating that the water is bound water-like. The medium water content gels exhibited intermediate behavior. These results were also confirmed by bulk gel conductivity measurments. The differential scanning calorimeter(DSC) experiment was simply introduced to further verify the bound water-like quantities which was obtained by the method of dilatometry and specific conductivity. Observing the amounts of X, Y, and Z water with the change of tacticity, the similar content of bound water-like may be due to the same primary structure of isotactic and syndiotactic polymer and the difference in free and interfacial water-like content may be due to the difference in secondary and tertiary structure of tactic polymer. Therefore, as the polymer conformation varies, the free and interfacial water-like content will be varied. In order to demonstrate these concepts, Russel et al.'s CPK space-filling molecular models of isotactic and syndiotactic P-HEMA was utilized.

• Nuclear Engineering and Technology
• /
• 제40권2호
• /
• pp.127-132
• /
• 2008

An experimental loop operating with water at supercritical conditions(25MPa, $600^{\circ}C$ in the test section) is designed for operation in the research reactor LVR-15 in UJV Rez, Czech Republic. The loop should serve as an experimental facility for corrosion tests of materials for in-core as well as out-of-core structures, for testing and optimization of suitable water chemistry for a future HPLWR and for studies of radiolysis of water at supercritical conditions, which remains the domain where very few experimental data are available. At present, final necessary calculations(thermalhydraulic, neutronic, strength) are being performed on the irradiation channel, which is the most challenging part of the loop. The concept of the primary and auxiliary circuits has been completed. The design of the loop shall be finished in the course of the year 2007 to start the construction, out-of-pile testing to verify proper functioning of all systems and as such to be ready for in-pile tests by the end of the HPLWR Phase 2 European project by the end of 2009.

• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.52-62
• /
• 1992

국내 원자력 발전소의 주요 기종인 가압 경수로에서는 일차 냉각계통을 통한 부식생성물 (CRUD)의 이동에 의해 노심에서 방사화된 후 노외표면에 침적된 방사성 핵종은 원전 종사자 방사선 피폭의 주원인이 된다. 따라서, 부식생성물에 의한 방사선 피폭을 감소시키기 위한 최적 화학운전 방안이 요망된다. 본 연구에서는 운전중인 국내 4개 발전소의 실제 수화학 운전 자료를 분석하였으며, 냉각재 화학운전 자료를 평가하기 위해 냉각재 수화학 조건에 따라 방사능 생성양을 계산할 수 있는 Computer 코드를 이용하였다. 실제 수화학 운전조건과 가정된 Elevated Li 운전조건에 따른 운전결과를 Computer 코드에 의해 예측하여 비교한 결과, Elevated Li 수화학 운전방법을 적용할 경우, 현재 적용되는 수화학 운전방법에 비하여 노심에서 부식생성물의 침적을 감소시킴으로써 노외 방사능 양을 상당히 감소시킬 수 있음을 알았다. 또한 계통 구성재 질과 핵연료봉의 건전성이 보장되는 한 냉각재 pH를 상승시키면 노외 방사능 생성감소에 유리함을 밝혔다.

• 약학회지
• /
• 제18권3호
• /
• pp.197-202
• /
• 1974

The data pf dosspcoatopm cpmstamts for aliphatic amines and quaternary ammonium-methylorange salts are based on the electrosatic theory of conductance. Dissociation constants for primary amines nad quaternary ammonium-methylorange salts (1$\times$10$^{-5}$~1$\times$10$^{-3}$ M) in nitrobenzene solution or water solution was evaluated from the relation of the concentration and the electric conduction and the electric conductance at $25^{\circ}C$ Plots of ${\delta}C$ against reciprocal conductance were linear ; hence the center-to-center distance of this salt was 1.75 $\AA$ in nitrobenzene solution.