• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.53-62
• /
• 2007

The purpose of this study was to investigate mechanical and comfort performances of the material for the improved working uniform for a volunteer fire brigade member, to get basic data for its evaluation and to help its material and design development. The results were as follows; The material of the newly developed working uniform was thinner and lighter than the material of the current used working uniform. It had better breathability, air permeability and heat transmission rate than the current one. It also had superior anti-flammability In all mechanical properties(tensile, bending, shearing, compression and surface properties), it showed better performances than the current one. It elongated and bended easier and more in both warp and weft directions. The elastic recovery and shape stability after elongation were also higher. The recovery and resistance to shearing and the resiliency and recovery after compression were also better than the current one. It was more flexible, softer and smoother in primary hand value, and was more suitable for the material for winter suit which needs softness and fullness in total hand value. The material of the improved working uniform showed lower thermal insulation value and higher evaporative resistance value compared to the material of the currently used working uniform from the sweating thermal manikin test. It was shown that the physical performances and the hand value of the textile material used in the newly developed working uniform for a volunteer fiber brigade member was improved compared to the one used in the currently used working uniform.

• Knowledge Management Research
• /
• v.25 no.2
• /
• pp.193-218
• /
• 2024

The current study investigated the factors influencing the buyer's repurchase intention for second-hand products. This study first identified perceived risk and purchase value as the two primary influencing variables. Additionally, some exogenous variables influencing these two variables were examined. Statistical analysis using Partial Least Squares (PLS) revealed that product uncertainty, seller uncertainty, and site trust had statistically significant relationships with perceived transaction risk. However, while economic benefit showed a significant impact on purchase value, product scarcity and resale value did not exhibit a significant relationship with purchase value. Perceived transaction risk was found to have an insignificant relationship with repurchase intention, but indirectly influenced repurchase intention through purchase value. Purchase value was identified as having a significant influence on repurchase intention. Therefore, it was concluded that purchase value is the most important factor influencing repurchase intention in the purchase of second-hand products, while transaction risk indirectly influences repurchase intention through purchase value. The study indicates that product uncertainty and economic benefit are the most significant exogenous factors influencing transaction risk and purchase value, respectively.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.33-45
• /
• 2000

The handle were observed by objective and subjective method as the washing was repeated for 4 kinds(sample A, B, C, D) of materials which have different water vapor transmission, and the change of water vapor transmission each others. The results of factor analyses for 18 polar adjective words on subjective handle test yielded 4 factors, that were 'elastic property', 'surface property', 'thickness and weight property' and 'thermal and rigid property'. The surface properties were deteriorated remarkably as washing was repeated and significant difference were observed. Compared with the primary hand value for each materials, the statistical difference of samples was shown at Koshi and Fukurami measured by the KES-FB system. Koshi decreased for all the materials after repeated washing, and Fukurami had a tendency to increase for all the materials in proportion to repeated washing. Significant difference of total hand value wasn't shown in repeated washing number, but in fabric types.

• Journal of Korean Elementary Science Education
• /
• v.19 no.1
• /
• pp.57-69
• /
• 2000

The purpose of this study was to seek desirable direction of science teaching and to present meaningful ideas for implementing the science curriculum and teaching materials by measuring the degree of the students' understandings on science and comparing it with those of American students. The researcher comprised 790 primary and middle school students for the study and administered them questionnaires developed by Trowbridge, Bybee, and Sund. The questionnaires were analyzed along with three categories such as science method, science theory, and the achievement of scientists. The researcher used t-test and ANOVA in order to compare the difference of their understandings in accordance with grades and gender, and later compared Korean students' understandings with those of similar aged American students administered by the National Assessment of Educational Progress (NAEP) The research loathed to the overall conclusions as follows; Both primary and middle school students' understandings on science revealed positive and appeared no significant difference in gender. And it is thought that science education was being carried out hopefully to enhancing Korean students' scientific literacy, therefore, science teaching like what is implemented to the classrooms currently should be kept on in future. On the other hand, it is necessary to change primary school children's understandings on attitude and value of scientists while to change middle school students' understandings on scientific processes by experiment. Also primary school children need to understand that scientists are willing to change their ideas when new information becomes known.

• Korean Journal of Materials Research
• /
• v.12 no.7
• /
• pp.580-586
• /
• 2002

The effect of processing and designing variables such as pouring temperature(1400 or $1500^{\circ}C$), inoculation and risering design(T and H type) on the formation of defects such as external depression, primary and secondary shrinkage cavities in GC150 gray cast iron was investigated. In T type risering design, external depression or primary shrinkage cavity due to liquid contraction was formed in all of the eight cases. Regardless of its modulus value, the riser could not function properly in T type risering design because directional solidification was not promoted toward the riser. On the other hand, the four cases of H type risering design in which thermal sleeves were set onto the risers produced defect-free castings. In both types of the risering designs, secondary shrinkage cavity caused by solidification contraction was not observed in the casting because of the expansion pressure due to graphite precipitation and the application of rigid pep-set mold. The degree of external depression or primary shrinkage cavity was reduced with lowered pouring temperature. The effect of inoculation was diminished because of the high carbon equivalent of GC 150 gray cast iron.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.7-10
• /
• 2002

We designed the flyback planar transformer, which had 8W capacity, with 70V input voltage and 8.2V output voltage for the establishment of design method and the confirmation of application possibility. The numerical value of inductance measured under the switching frequency of 120 kHz was 1650 ${\mu}H$, which was the inductance efficiency of 85~87% against theoretical value. The A.C. resistance of primary and secondary coil was 4.2 ${\Omega}$ and 0.25 ${\Omega}$ respectively. On the other hand, the quality factor for each wound numbers showed quite a high value of 158 and 75 respectively. And the Coupling Factor was 0.96~0.97 under 120 kHz switching frequency. And the shape of the output wave of the planar transformer at 70V input voltage was a stable square wave.

• Progress in Medical Physics
• /
• v.33 no.4
• /
• pp.121-128
• /
• 2022

Purpose: This study evaluated the quality of plans based on magnetic resonance-guided radiotherapy (MRgRT) tri-Co-60, linac, and conventional linac-based volumetric modulated arc therapy (linac-VMAT) for prostate cancer. Methods: Twenty patients suffering from prostate cancer with intermediate risk who were treated by MAT were selected. Additional treatment plans (primary and boost plans) were generated based on MRgRT-tri-Co-60 and MRgRT-linac. The planning target volume (PTV) of MRgRT-based plans was created by adding a 3 mm margin from the clinical target volume (CTV) due to high soft-tissue contrast and real-time motion imaging. On the other hand, the PTV of conventional linac was generated based on a 1 cm margin from CTV. The targets of primary and boost plans were prostate plus seminal vesicle and prostate only, respectively. All plans were normalized to cover 95% of the target volume by 100% of the prescribed dose. Dosimetric characteristics were evaluated for each of the primary, boost, and sum plans. Results: For target coverage and conformity, the three plans showed similar results. In the sum plans, the average value of V_65Gy of the rectum of MRgRT-linac (2.62%±2.21%) was smaller than those of MRgRT tri-Co-60 (9.04%±3.01%) and linac-VMAT (9.73%±7.14%) (P<0.001). In the case of bladder, the average value of V_65Gy of MRgRT-linac was also smaller. Conclusions: In terms of organs at risk sparing, MRgRT-linac shows the best value while maintaining comparable target coverage among the three plans.

• Fashion & Textile Research Journal
• /
• v.3 no.1
• /
• pp.20-24
• /
• 2001

The primary objective of this study was to empirically explore the mechanical properties of marketing Korean fabrics by using KES-FB system and estimate the sewability of Korean clothes by the mechanical properties. From the empirical research, it was found that Korean fabrics for spring and summer has been transformed easier and less flexible by shearing Korean fabrics for autumn and winter. Also, it was found that there is a significant difference in the hand value as tensile, surface and compression. It was found that Korean fabrics for spring and summer has a stiffness and elastic properties of matter and Korean fabrics for autumn and winter has a bulky and abundant elasticity. Finally, it was found that Korean fabrics for autumn and summer in the joint of account of the mechanical properties. Also, the difficulties of process has been expected by sewability like seam-pucker, over feed, sewing and steam-press.

• Science of Emotion and Sensibility
• /
• v.5 no.3
• /
• pp.47-52
• /
• 2002

The handle of fabrics including tactility and sense of visuality are closely related to the factors governing the preferences of end-users. This study shows the change of mechanical properties, thermal properties and optical properties by comparing two fabrics which are woven with circular shaped filaments and with triangular ones. The fabric mechanical characteristics required for primary hand values were evaluated with the KES-FB system. The mechanical properties measured by KES-FB system shows that fabrics made of circular filaments are greater than those made of triangular ones. The thermal properties measured by KES-F7(Thermo Labo II) system shows that the values of the initial maximum value(qmax) and the thermal conductivity(λ) are higher in the fabric made of triangular shaped ones. When the light rays tall on a surface, the fabric made of triangular filaments shows more lustrous than circular ones.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.667-673
• /
• 2021

The purpose of this study was to obtain drape information and objective texture of fabrics easily and quickly by using a constructed fabric database. For the construction of the fabric database, 287 woven fabrics were examined by using the CLO fabric kit, KES-FB system, and drape test system. The k-means cluster analysis method was used to classify the fabrics into 7 grades. After correlation analysis of the fabric properties for each experiment, similar properties of the CLO fabric kit and KES-FB system were chosen, which were then designed to extract similar fabrics from the database. It was confirmed that inferring the drape information and objective hand feeling of fabrics was to some extent possible by extracting similar fabrics from the database. In this study, the primary hand and total hand value(THV) of KES-FB system, which was constructed by Kawabata and other experiments, were used to quantify the objective hand feeling, because they are the most widely used. However, these standards can be changed over time; in order to be applied within the clothing industry, these standards may have to be changed to some extent. Moreover, it is notable that although objective hand feeling cannot be expressed in the 3D virtual costume program, it can be easily derived from the constructed database. Additionally, it is expected that the existing 3D virtual costume program will express the costumes more realistically by improving these results.