• 한국항해항만학회지
• /
• 제36권9호
• /
• pp.729-735
• /
• 2012

The primary wave energy conversion by a three-dimensional bottom-mounted oscillating water column (OWC) wave power device in regular waves has been studied. The linear potential boundary value problem has been solved following the boundary matching method. The optimum shape parameters such as the chamber length and the depth of the front skirt of the OWC chamber obtained through two-dimensional numerical tests in the frequency domain have been applied in the design of the present OWC chamber. Time-mean wave power converted by the OWC device and the time-mean second-order wave forces on the OWC chamber structure have been presented for different wave incidence angles in the frequency-domain. It has been shown that the peak period of $P_m$ for the optimum damping parameter coincides with the peak period of the time.mean wave drift force when ${\gamma}=0$.

• 농업과학연구
• /
• 제50권3호
• /
• pp.349-356
• /
• 2023

Garlic powder (GP) was supplemented in the diet to assess the growth efficiency, nutritional retention, and fecal score of growing pigs. In total, 80 growing pigs ([Yorkshire × Landrace] × Duroc) were arbitrarily allotted (22.04 ± 0.56 kg primary average body weight) to two different trial groups with eight repetitions (three males and two females) in each pen for the 42-day trial. The dietary treatment consisted of control (CON, basal diet), which included 0.2% GP (TRT1). Growing pigs fed the GP diet exhibited an increase (p < 0.05) in body weight on day 42 and a lower (p < 0.05) overall feed conversion ratio compared to the CON pigs; however, the average daily gain and feed intake showed no difference (p > 0.05). Additionally, nutrient utilization of dry matter was greater (p < 0.05) in the GP-supplemented diet group than in the CON group. The feeding methods did not adversely affect the nitrogen and energy utilization and the fecal score significantly (p > 0.05). In summary, growing pigs fed the GP diet showed increased growth and nutritional utilization, and no adverse impact on the fecal score; thus, it could be utilized as a stimulant for improved growth performance.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1595-1607
• /
• 2018

In this paper, a hierarchical control strategy is introduced to control a new three-port multidirectional DC-DC converter for integrating an energy storage system (ESS) to a bipolar DC microgrid (BPDCMG). The proposed converter provides a voltage-balancing function for the BPDCMG and adjusts the states of charge (SoC) of the ESS. Previous studies tend to balance the voltage of the BPDCMG buses with active sources or by transferring power from one bus to another. Furthermore, the batteries available in BPDCMGs were charged equally by both buses. However, this power sharing method does not guarantee efficient operation of the whole system. In order to achieve a higher efficiency and lower energy losses, a triple-layer hierarchical control strategy, including a primary droop controller, a secondary voltage restoration controller and a tertiary optimization controller are proposed. Thanks to the multi-functional operation of the proposed converter, its conversion stages are reduced. Furthermore, the efficiency and weight of the system are both improved. Therefore, this converter has a significant capability to be used in portable BPDCMGs such as electric DC ships. The converter modes are analyzed and small-signal models of the converter are extracted. Comprehensive simulation studies are carried out and a BPDCMG laboratory setup is implemented in order to validate the effectiveness of the proposed converter and its hierarchical control strategy. Simulation and experimental results show that using the proposed converter mitigates voltage imbalances. As a result, the system efficiency is improved by using the hierarchical optimal power flow control.

• Journal of Radiation Protection and Research
• /
• 제7권1호
• /
• pp.34-48
• /
• 1982

본 연구의 일차적 목적은 방사선 방호를 위하여 임의지점(任意地點)의 주변 방사선량의 수준을 특성(特性)짓는 방법의 하나로 ICRU가 정의(定義)한 흡수선량지수를 실측(實測)하는데 있는 바 이를 위한 실험은 에비실험과 본 실험의 두 단계로 나누어 수행하였다. 예비단계의 실험에서는 30cm 지름의 polyethylene구(球)를 사용한 반면 본 실험에서는 인체조직등가물질(人體組織等價物質)의 구(球)를 제작하였으며 두 실험 모두 $^{137}Cs$ 및 $^{60}Co$ 감마선장(線場)과 TRIGA Mark-II 원자로의 열중성자(熱中性子) column의 중성자공장(中性子工場)에서 행하여졌다. 감마선 흡수선량측정에는 TCD-700 $(^{7}LiF)$ chip을, 중성자선량측정에는 Au 방사화박(放射化薄)과 함께 TLD chip도 사용하였는데 이 경우에는 감마선의 기여를 판별해 내기 위하여 TLD-600 $(^{6}LiF)$과 TLD-700을 동시에 사용하였다. 감마선 조사(照射)의 경우 구(球) phantom내(內) 흡수선량의 이론적 해석은 Burlin의 공동이론(空洞理論)에서 유도된 Erlich의 방법을 썼으며, 중성자 선량해석에는 fluence-KERMA 변환방법을 사용하였다. 이들 선량에 관하여서는 특히 자세히 설명하였다. 해석에 실험결과는 모두 통계적으로 처리 분석하였으며 특히 심부선량분포(深部線量分布)는 규격화(規格化)한 값을 사용하여 도표(圖表)로 나타내는 한편, 결론에서는 방사선방호용 지수량(指數量) 실측(實測)의 가능성과 난점(難點)을 설명하고 해결하여야 할 문제점들을 언급(言及)하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권2호
• /
• pp.112-117
• /
• 2007

본 연구는 수산 폐기물, 폐어망 등 해양 유기성 폐기물을 유류와 같은 대체 에너지 자원으로 개발하기 위한 기초 연구로 수행되었다. 현재까지 폐플라스틱이나 폐타이어와 같은 석유공업을 기반으로 한 유기성 폐기물을 유류자원화 하여 대체연료로 사용하는 연구가 활발하고 상용화된 사례들은 많다. 그러나 주위에 쉽게 버려지는 음식물 쓰레기, 유기성 폐기물을 이용해 대체자원을 개발하는 연구는 미미한 실정이다. 따라서 본 연구에서는 동물성 유기 폐기물을 사용하여 고온고압 하에서 열분해를 이용해 오일을 얻었고, 오일의 성분과 특성을 조사하여 대체자원으로의 가능성을 평가하였다. $250^{\circ}C$, 40 atm에서 열분해한 바이오오일은 점도가 높아 불순물을 제거에 어려움이 있었고, 발열량이 중유(重油)보다 다소 낮았으며, 연료로 사용하기에는 부적합한 다양한 종류의 가스 생성물을 얻었다. 하지만 기존의 열분해 방법들이 $500^{\circ}C$ 이상의 고온에서 반응시키는 것과 달리 대상물질 자체의 수분을 이용해 증기압으로 가압하기 때문에 $250{\pm}5^{\circ}C$의 낮은 온도에서도 열분해 할 수 있었다. 그러나 바이오오일의 점도가 높아 액상연료로 사용하기에는 미흡하였다.

• 한국의류학회지
• /
• 제30권6호
• /
• pp.870-879
• /
• 2006

In this study, the difference in the mechanical properties of silver and cotton weft knitted fabrics was studied. Six silver fabrics for the summer ladies' knit outwear were knitted varying knit structure and fabric density. Two commercial cotton knitted fabrics were selected to compare the properties. subjective sensation of hand of the fabrics was also studied. Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(THV) was carried out according to the KW-304 Summer. The result of the research show that silver weft knitted fabrics had lower LT, RT, G, 2HG and higher EM, W, LC, WC, RC than cotton weft knitted fabrics. The use of silver yam contributed to increase in surface roughness of knitted fabrics. As the silver knitted fabrics became thicker compressional energy increased. The use of silver yarns contributed to much better fabric handle compared with the use of cotton yam only. It appeared that coefficient of friction of tuck stitch was larger than that of plain and interlock stitch. KOSHI and FUKURAMI values of the tuck samples were significantly higher than those values of the plain and interlock samples, while SHARI values were low in general. The total hand value of tuck stitch was higher than those of interlock and plain stitch.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.676-682
• /
• 2010

Superior hydrophilic properties will allow varieties of polyester(PET) fiber materials, fabrics and industrial materials a broader scope of use. The purpose of this study was to investigate the effect of water-absorbent softener treatment on the end-use properties and the hand of polyester knitted fabrics. Two different fabrics were knitted for the summer ladies' outwear; PET jersey and PET mesh. Variables were softner treatment and stitch type(jersey and mesh). Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(T.H.V.) was calculated according to the KN-304 Summer. Both water-absorbent softner treatment and stitch types affected mechanical properties and hand values of PET fabrics. Mesh were thicker than single jersey stitch. As they became thicker, tensile, shear, and compressional energy increased. It appeared that coefficient of friction of mesh stitch was larger than that of single jersey stitch. The coefficient of friction and the mean deviation of surface roughness were decreased by softener treatment. After softner treatment KOSHI and SHARI of the both PET jersey and PET mesh decreased. However, FUKURAMI values of PET jersey increased and that of PET mesh decreased. The T.H.V. of the treated PET jersey was lower than that of the untreated one, while the T.H.V. of the treated PET mesh was higher than that of the untreated one. Overall T.H.V. of the single jersey was better than that of the mesh before and after softner treatment.

• 열처리공학회지
• /
• 제23권4호
• /
• pp.198-204
• /
• 2010

Modified 9Cr-1Mo steels possess excellent high-temperature mechanical properties and are widely used in energy conversion industries. However, in-service materials degradation, such as softening, carbide-induced embrittlement, temper embrittlement, etc., can take place during long-term operation. Evolution of microstructure due to service exposure to high temperature has a strong effect on the performance of heat resistant steels. In case of modified 9Cr-1Mo steels, precipitation of $Fe_2Mo$-type laves phases and coarsening of $M_{23}C_6$-type carbides are the primary cause of degradation of mechanical properties such as toughness, hardness, tensile strength and creep resistance. This study was aimed at finding reliable parameter for assessing the integrity of modified 9Cr-1Mo steels. Characteristic parameters were attained between mechanical and ultrasonic properties.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.213-218
• /
• 2012

Steam reforming of methane (SRM) is the primary method to produce hydrogen. Commercial Ni-based catalysts have been optimized for SRM with excess steam ($H_2O/CH_4$ > 2.5) at high temperatures (> $700^{\circ}C$). However, commercial catalysts are not suitable under severe conditions such as stoichiometric steam over methane ratio ($H_2O/CH_4$ = 1.0) and low temperature ($600^{\circ}C$). In this study, 15wt.% Ni catalysts supported on $Ce_{0.8}Zr_{0.2}O_2$ were prepared at various calcination temperatures for SRM at a very high gas hourly space velocity (GHSV) of $621,704h^{-1}$. The calcination temperature was systematically varied to optimize 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst at a $H_2O/CH_4$ ratio of 1.0 and at $600^{\circ}C$. 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst calcined at $500^{\circ}C$ exhibited the highest $CH_4$ conversion as well as stability with time on stream. Also, 15wt.% $Ni-Ce_{0.8}Zr_{0.2}O_2$ catalyst calcined at $500^{\circ}C$ showed the highest $H_2$ yield (58%) and CO yield (21%) among the catalysts. This is due to complex NiO species, which have relatively strong metal to support interaction (SMSI).

• 전기화학회지
• /
• 제19권2호
• /
• pp.50-56
• /
• 2016

본 연구에서는 습식분쇄, 분무건조 및 열처리 공정을 통해 알루미늄 및 마그네슘이 치환된 구형의 스피넬계 $Li_{1.10}Mn_{1.86}Al_{0.02}Mg_{0.02}O_4$ 양극재료를 합성하였다. 이때 공정변수로는 전구체를 만드는 분무건조공정에서 고형분(20~30 wt%)을, 열처리 공정에서는 산소분위기 유무를 변수로 하였다. 제조된 모든 양극재료는 상온에서 매우 우수한 전지특성을 보여주었으나, 출력특성에 있어서는 5C 방전곡선이 기준이 되는 0.1C 방전곡선 대비 서로 상이한 거동을 보임을 확인하였다. 이러한 고출력 거동의 차이는 첫째, 충방전 곡선상에서 3.3 V(vs. $Li/Li^+$) plateau 구간의 반응 용량 측정을 통해 양극재료의 산소결함 수준의 차이로 인한 것임을 확인하였다. 공기분위기에서 제조한 양극재료는 산소분위기에서 제조한 것에 비해 두 배 이상의 plateau 거동을 보이고 있으며, 이러한 현상으로부터 제조된 양극재료의 산소결함 정도와 방전초기 과전압 정도는 상관관계가 있음을 확인할 수 있었다. 둘째로는 임피던스 측정을 통해 산출된 확산계수로부터 고형분이 상대적으로 낮은 상태에서 제조된 양극재료가 그렇지 않은 양극재료에 비해 상대적으로 절반 이하 낮은 값을 가지고 있음을 알 수 있었다. 또한 입자 내부 형상 분석을 통한 내부 치밀도 및 임피던스 분석을 통한 확산속도의 차이를 확인함으로써, 방전 말단의 과전압 거동은 입자 내부의 리튬이온 확산속도와 관련이 있음을 확인하였다. 확산계수는 고형분이 상대적으로 낮은 20 wt% 상태에서 제조된 양극재료의 경우가 가장 낮으며, 이는 동일 양극재료의 내부 공극률이 가장 높은 결과와 부합하는 것이다.