References
- C. R. Brinkman, B. and Gieseke, P. J. Maziasz : TMS, (1993) 107.
- R. L. Klueh and A. T. Nelson : J. Nucl. Mater., 371 (2007) 37. https://doi.org/10.1016/j.jnucmat.2007.05.005
- K. Hamada, K. Tokuno, Y. Tomita, H. Mabuchi, and K. Okamoto : ISIJ Int., 35 (1995) 86. https://doi.org/10.2355/isijinternational.35.86
- K. Sawada, M. Takeda, K. Maruyama, R. Komine, and Y. Nagae : ISIJ Int., 84 (1999) 581.
- H. Kushima, K. Kimura, and F. Abe : ISIJ Int., 85 (1999) 841.
- H. Okamura, et al. : Nucl. Eng. Des., 193 (1999) 243. https://doi.org/10.1016/S0029-5493(99)00181-8
- E. P. Papadakis : Rev. Sci. Instrum., 47 (1976) 806. https://doi.org/10.1063/1.1134757
- W. C. Oliver and G. M. Pharr. : J. Mater. Res., 7 (1992) 1564. https://doi.org/10.1557/JMR.1992.1564
- ISO 14577-2, Instrumented indentation test for hardness and materials parameters (2002).
- ASTM A370-09ae1, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM, Philadelphia, PA., (2009).
- Y. K. Hyun, J. D. Lee, and I. B. Kim : Key Eng. Mat., 270 (2004) 1206.
- G. Sposito, et al. : NDT&E Int., (2010). doi:10.1016/j.ndteint2010.05.012.
- J. E. Lee, Y. C. Kim, J. P. Ahn, and H. S. Kim : Acta Mater. 53 (2005) 129. https://doi.org/10.1016/j.actamat.2004.09.010
- M. Vasudevan, et al. : Scr. Metall. Mater. 30 (1994) 1479. https://doi.org/10.1016/0956-716X(94)90249-6
- P. Palanichamy, et al. : NDT&E Int. 33 (2000) 253. https://doi.org/10.1016/S0963-8695(99)00047-X
- M. Hattestrand, M. Schwind, and H.O. Andren : Mater. Sci. Eng. A 250 (1998) 27.
- S. Saroja, et al. : Acta Metall. Mater. 43 (1995) 2985. https://doi.org/10.1016/0956-7151(95)00022-N
- T. Morishita, and M. Hirao : Int. Solid Struct. 34 (1997) 1169. https://doi.org/10.1016/S0020-7683(96)00110-2
- H. Jeong, and D. H. Kim : Mater. Sci. Eng. A 337 (2002) 82.
- R. Truell, C. Elbaum and B. B. Chick : Ultrasonic Methods in Solid State Physics, Academic Press, Inc. (1969).
- I. N. Sneddon : Int. J. Eng. Sci., 3 (1965) 47. https://doi.org/10.1016/0020-7225(65)90019-4