• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.212-214
• /
• 2006

Air Management System is composed by Pump, Fan, Compressor and Blower In general their performances depend on the capability of the motor, power converter device and controller. Especially, it should be noticed upon designing Air Management System using for Fuel Cell System, that Pump, Fan, Compressor and Blower satisfy the condition of the high performance, high efficiency, high density and reasonable price considering the safety and Economic Efficiency. In order for this, it should be studied that which kind of Motor is the most suited for Air Management System for Fuel Cell, such as Induction Motor, Brushless DC Motor, and Switched Reluctance Motor which is widely using in industry. This paper presents the designing and manufacturing of Outer Rotor Type BLDC Motor and Driver for Air Blower of Air Management System. Experimental results from a laboratory prototype arc presented to validate the feasibility of the proposed Air Blower Motor and Driver.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.382-384
• /
• 2013

LED is much brighter than the traditional incandescent, and low power consumption. Development and commercialization of LED fluorescent lamp is made in order to improve efficient fluorescent lamps with this existing and environmental problems. Because, unlike fluorescent lamps, it is not possible to directly use AC power to the unidirectional element having a polarity, LED requires a power supply. The power supply function is lowered as compared with the fluorescent lamp common in terms of maintenance costs because of the high price large. In this study, we constructed a circuit that can be controlled with a constant current in order to eliminate a phenomenon that brightness of the light which rectifies the AC power supply easy to place in the power supply due to the current change due to the voltage fluctuation is changed, in maintenance, I would like to propose how to develop a device which can be easily replaced less expensive composed of interchangeable modules of Plug in / out method to distinguish the LED module this.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.132-139
• /
• 2020

The ionizer module used in this air cleaner supplies high voltages of 3.5KV / -4KV to the discharge electrode HV+ / HV- using a winding transformer to generate positive and negative ions by electric field radiation of carbon fiber brush. The ionizer module circuit using the existing MCU has the disadvantage of large PCB size and expensive price, and the gate driver chip using the existing ring oscillator has oscillation period sensitive to PVT (Process-Voltage-Temperature) fluctuation and there is risk of fire or electric shock because there is no fault detection function by short circuit of HV+ and GND as well as HV- and GND. Therefore, in this paper, even though PVT fluctuates, by using 7-bit binary up counter, HV+ voltage reaches the target voltage by adjusting oscillation period. And an HV+ short fault detection circuit for detecting a short circuit between HV+ and GND, an HV- short fault detection circuit for detecting a short circuit between HV- and GND, and an OVP (Over-Voltage Protection) for detecting that HV+ rises above an overvoltage are newly proposed.

• East Asian Economic Review
• /
• v.17 no.2
• /
• pp.103-128
• /
• 2013

This paper analyzes the dynamics and nature of regional business cycle synchronization for East Asian countries in the period of 2000:Q1-2011:Q4. Estimating a dynamic two-factor model extracts the common factor and the nation-specific factor from both the macroeconomic aggregates and plausible driving forces of regional business cycles. Evidence for regional business cycle synchronization is particularly strong for Korea, Malaysia and the Philippines, while Japan shows weak evidence of regional synchronization. On the other hand, Indonesia, Thailand, Singapore and China are decoupling from regional business cycles. The driver of monetary aggregate is the most significant determinant of regional fluctuations of macroeconomic aggregates, whereas oil price and productivity are on average important driving forces of nation-specific fluctuations of real economic activities.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.72-79
• /
• 2020

To ensure the safety of Advanced Driver Assistance Systems (ADAS) or autonomous vehicles, it is important to recognize the vehicle position, and specifically, the increased accuracy of the lateral position of the vehicle is required. In recent years, the quality of GPS signals has improved a lot and the price has decreased significantly, but extreme urban environments such as tunnels still pose a critical challenge. In this study, we proposed stable and precise lane recognition and tracking methods to solve these two issues via fusion of AVM images and vehicle sensor data using an extended Kalman filter. In addition, the vehicle's lateral position recognition and the abnormal state of RTK GPS were determined using this approach. The proposed method was validated via actual vehicle experiments in urban areas reporting multipath and signal disconnections.

• Asia Marketing Journal
• /
• v.17 no.1
• /
• pp.55-67
• /
• 2015

Despite the well-known predictive power of Dirichlet model on customer loyalty, deviations of share of category requirement (SCR) predicted by Dirichlet model from actual SCR have been repeatedly reported. It has been shown that these deviations can be systematically explained by some factors such as brand's market share, product positioning strategy, purchase volume and retail marketing mix strategies. Presuming that brand equity would be additional sources of these deviations, current study assesses the incremental predictive power of brand equity by using over 4,000 brand-level observations for the consumer packaged goods industry in the U.S. Our model estimations indicate that brands that exhibit higher brand equity enjoy excess loyalty, with the primary driver being volume premium, rather than price premium. Overall, our findings support the notion that idiosyncratic brand properties can explain excess behavioral loyalty, a notion that is in stark contrast with the Dirichlet view of the world: brand equity does not exist.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.174-192
• /
• 2021

The LIDAR sensor, which provides higher cognitive performance than cameras and radar, is difficult to apply to ADAS or autonomous driving because of its high price. On the other hand, as the price is decreasing rapidly, expectations are rising to improve existing autonomous driving functions by taking advantage of the LIDAR sensor. In level 3 autonomous vehicles, when a dangerous situation in the cognitive module occurs due to a sensor defect or sensor limit, the driver must take control of the vehicle for manual driving. If the driver does not respond to the request, the system must automatically kick in and implement a minimum risk maneuver to maintain the risk within a tolerable level. In this study, based on this background, a LIDAR-based LKS MRM algorithm was developed for the case when the normal operation of LKS was not possible due to troubles in the cognitive system. From point cloud data collected by LIDAR, the algorithm generates the trajectory of the vehicle in front through object clustering and converts it to the target waypoints of its own. Hence, if the camera-based LKS is not operating normally, LIDAR-based path tracking control is performed as MRM. The HAZOP method was used to identify the risk sources in the LKS cognitive systems. B, and based on this, test scenarios were derived and used in the validation process by simulation. The simulation results indicated that the LIDAR-based LKS MRM algorithm of this study prevents lane departure in dangerous situations caused by various problems or difficulties in the LKS cognitive systems and could prevent possible traffic accidents.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.27-34
• /
• 2005

In this paper, FPGA It/w and S/W Embedded system for LDM remote control is implemented. XScale CPU is used on developed system and in communcation ethenet and serial is used. CPU interface with H/W LDM rotation and to drive LDM FPGA logic is implemented, to transmit LDM data from long distance command packet is composed, for S/W Embedded linux is used to design linux device driver and linux application program. This S/W is run by module so by loading this module to linu)( file system it can do any movement. Also by compiling Embedded linux to the system it can lower the price of the system. By using this H/W and S/W theory it can be used on any other embedded system.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.85-90
• /
• 2015

Purpose - Global trends play a part to change the structure of the fashion industry. In particular, companies attempting to conduct innovative marketing centering on such products as SPA brands are growing into global companies. SPA stands for "Specialty Store Retailer of Private Label Apparel", meaning its activities are fully integrated from manufacturing through sales, including material procurement design, product, distribution, inventory management, and final sales. For this reason, more understanding of individual corporate profitability is very sensitive to consumer's attitudinal changes. The effects that corporate marketing activities on customer lifetime value through brand attitude were analyzed based on a structural equation model. Rust suggested value equity, brand equity, and relationship equity as customer equity driver. The study examines Chinese consumer because China is the fastest growing fashion market in the world. Research design, data, and methodology - The survey targeted Chinese college student age 20s. Only respondents who had purchased SPA brands in the past year were included for this research. A total of 303, except for 47 missing data of 350 distributed questionnaires were included in this research. The questionnaire is consists of six part to measure value, brand, relationship equity, attitude toward brand, purchase intention and demographic characteristics. This research conducted exploratory factor analysis and reliability test. To verify research hypotheses, structural equation model test was conducted. As for customer equity, diversified models in consideration of the scope of acquisition data, a method of collection of data, influencing factor, and predictability were suggested based on a net present value model. However, the history of customer equity study is relatively short, and sufficient empirical analyses have not been conducted, so more integrated analysis is required. In this study, the concept of driver suggested by Rust was applied to figure out the effects that consumer's attitude has on customer equity. The customer equity driver suggested by them consists of brand equity, value equity, and relationship equity. Results - This study reveals that value equity and brand equity have a positive influence on relationship equity. And, relationship equity has a positive influence on purchase intention through brand attitude. However, value equity and brand equity do not influence on brand attitude. Conclusion - The results of this research generated following implications. First, SPA brands need to take advantage of their value equity such as perceived low price and up-to-date fashion style to attract Chinese young consumer. Second, strong brand equity promises dominants position in the competitive market. As Chinese fashion market grows rapidly, SPA brands can consider branding strategy such as flagship store and celebrity marketing enhancing brand image. Third, the core concept of customer equity strategy is to maintain a relationship with their expecting and existing customers. The relationship equity is built by brand equity and value equity. When SPA brands serves product and service meet with individual customers, customers have intimacy to the brands.