• The Korean Journal of Physiology
• /
• v.27 no.1
• /
• pp.67-77
• /
• 1993

Acute and chronic effects of ethanol (EOH) administration on the cardiovascular and hormonal responses to repeated hemorrhage were investigated in conscious normotensive Wistar rats and spontaneously hypertensive rats (SHR). The chronic EOH treated group received 5% EOH (vol/vol) ad libitum in the drinking water far the first week,10% for the last 2 weeks, and 20% for the last 5 weeks from the age of 6 weeks. The EOH free group received tap water. Chronic EOH and EOH free groups were randomly subdivided into acute EOH infusion and control groups. Under ether anesthesia, catheters were inserted into the femoral vein and both femoral arteries. After rats regained consciousness and their blood pressure was stabilized, responses to quick hemorrhage (5 ml/kg BW) were tested. In the acute EOH infusion group, hemorrhage was induced 20 min after EOH infusion (1.0 g/kg BW), Baroreceptor reflex sensitivity was assessed by the ratio of changes in hen.1 rate and mean arterial pressure (${\Delta}HR/{\Delta}MAP$) immediately after the hemorrhage. Chronic EOH administration elevated MAP in Wistar rats. During acute EOH infusion, MAP do- creased and HR increased in all groups. In comparison to EOH free control rats, acute or chronic EOH treated rats showed a greater reduction in MAP and a smaller elevation in heart rate in response to a hemorrhage. The degree of MAP reduction was significantly greater in SHR than in Wistar rats. Both the acute and chronic EOH administration attenuated the baroreceptor reflex and retarded MAP recovery, again the trend being much more prominent in SHR. The increase in plasma vasopressin and lenin concentrations after hemorrhage were intensified by the chronic EOH administration. SHR showed a greater vasopressin response but a smaller lenin response than Wistar rats. These results indicate that the EOH treated rats, particularly SHB, are prone to shock by a hemorrhage, which may be partly attributed to an impaired baroreceptor reflex function.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.5
• /
• pp.837-847
• /
• 2000

For the treatment of wastewaters generated from beer industry and petrochemical company with high organic and nitrogen contents, laboratory scale of A/O Pure-Oxygen Biofilm (POB) process was developed and studied by means of the comparative economic analysis with extended aeration process. When the wastewater of beer company was initially treated by the A/O POB process in the ranges of 70 to 150 mg TOC/L diluted with tap water, higher than 92% of TOC removal was accomplished in the all ranges. In case of petrochemical wastewater, the initial TOC removal was as low as 52%, though, it increased to 86% after 32 days of operation and also the TKN removal marked 71% after 27 days. Continuous high removal rates were monitored in both the TOC and TKN parameters during the experimental period. Due to the cost for PSA (Pressure Swing Adsorption) setting and biomass supporting media installation, the initial construction cost of A/O POB process was 2.9 times higher than that of extended aeration process. However, the advantages such as low sludge production, no need for sludge recycling and low energy consumption allow the A/O POB process to have 2.5 times lower operation and maintenance costs. Consequently, in the long term of operation, it is likely that A/O POB process would show higher performance as well as cost effectiveness compared to extended aeration process.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.10
• /
• pp.23-31
• /
• 2016

Grout is generally operated with low viscous material similar to water, but grout for micro crack with high viscous materials and high injection pressure is gradually increased under the development of underground and subsea space. In order to estimate grouting injection performance considering crack width, viscosity of grouting materials, and injection pressure, there should be a reliable standard laboratory testing method. In this paper, theoretical injection mechanisms of grouting materials are presented as radial and linear flows, and laboratory testing apparatus are introduced to simulate each flow case. Radial flow is simulated by using acrylic disk plates which are able to spread grouting material radially from the center of the disk plates, and linear flow is simulated by using stainless parallel plane plates which are able to spread grouting material linearly. Apparatus are consist of upper and lower plates and industrial films with different thickness are placed between plates in order to simulate various crack widths. Laboratory verification tests with these apparatus were conducted with tap water (1cP at $20^{\circ}C$) as an injection material. Through the laboratory testing results, the best laboratory testing method is recommended in order to estimate grouting injection performance.

• Clinical and Experimental Pediatrics
• /
• v.51 no.8
• /
• pp.856-860
• /
• 2008

Purpose : This study aimed to examine the factors influencing the appearance of headache and backache following diagnostic lumbar puncture in children, focusing on the need for strict bed rest after lumbar puncture. Methods : We studied 70 two-fifteen-year-old pediatric patients who underwent diagnostic lumbar puncture from July 2005 to July 2007 at Konkuk University Hospital. We divided them into two groups. Patients in the first group (n=24) were allowed free mobility and patients in the second group (n=46) were to have strict bed rest for four hours after puncture. Data were analyzed by age, sex, number of puncture attempts, cell counts and pressure in the cerebrospinal fluid (CSF), duration of bed rest, and occurrence of headache and backache. Results : The rate of complications was not significantly related to sex, age, presence of enterovirus, CSF pressure, or postural headache. The occurrence of headache was significantly correlated with white blood cell (WBC) count in CSF (P=0.043). Symptom frequency did not differ significantly between the groups. Backache was significantly related to the frequency of puncture attempts (P=0.046). Conclusion : Strict bed rest following diagnostic lumbar puncture in children does not influence headaches and backaches. These are respectively related to the WBC count on the CSF profile and the frequency of attempts. Therefore, after lumbar puncture, absolute bed rest is not necessary and patients are more comfortable with free mobility.

• The Korea Journal of Herbology
• /
• v.27 no.6
• /
• pp.99-105
• /
• 2012

Objectives : Korean red ginseng and Morus alba L. are used as a traditional treatment for diabetes. This study was designed to elucidate whether combination with Korean red ginseng and Morus alba L. (MPM) ameliorates metabolic syndrome in fructose-fed rats. Methods : Animals were divided into four groups; Control receiving tap water, fructose-fed, rosiglitazone-treated fructose-fed rats, and MPM-treated fructose-fed rats both receiving supplemented with 60% fructose (n=10). The MPM or rosiglitazone groups initially received a high-fructose (HF) diet alone for 8 weeks, with supplementation with MPM or rosiglitazone occurring during the final 6 weeks. Results : MPM and rosiglitazone, synthetic $PPAR{\gamma}$ agonist, treatment significantly prevented the increase in fasting serum glucose, leptin, triglyceride, and low density lipoprotein in the HF group when comparing with the control group. MPM and rosiglitazone also led to an increase in high density lipoprotein level in the HF group. The administration of MPM and rosiglitazone prevented the development of the metabolic disturbances such as impaired glucose tolerance, and blood pressure. MPM suppressed increased expressions of endothelin-1 (ET-1) in HF rat aorta. In addition, MPM significantly increased IR-${\beta}$ and PPAR-${\gamma}$ expression in muscle. Conclusions : Based on these results, we suggest that the administration of MPM improves metabolic syndrome through the alteration in lipid profiles and suppression of insulin resistant and blood pressure.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.605-610
• /
• 2011

Phase holdup characteristics of relatively large and small bubbles were investigated in a three-phase(gasliquid-solid) fluidized bed of which diameter was 0.105 m(ID) and 2.5 m in height, respectively. Effects of gas(0.01~0.07 m/s) and liquid velocities(0.01~0.07 m/s) and particle size($0.5{\sim}3.0{\times}10^{-3}m$) on the holdups of relatively large and small bubbles were determined. The holdups of two kinds of bubbles in three phase fluidized beds were estimated by means of static pressure drop method with the knowledge of pressure drops corresponding to each kind of bubble, respectively, which were obtained by dynamic gas disengagement method. Dried and filtered air which was regulated by gas regulator, tap water and glass bead of which density was $2500kg/m^3$ were served as a gas, a liquid and a fluidized solid phase, respectively. The two kinds of bubbles in three-phase fluidized beds, relatively large and small bubbles, were effectively detected and distinguished by measuring the pressure drop variation after stopping the gas and liquid flow into the column as a step function: The increase slope of pressure drop with a variation of elapsed time was quite different from each other. It was found that the holdup of relatively large bubbles increased with increasing gas velocity but decreased with liquid velocity. However, the holdup showed a local minimum with a variation of size of fluidized solid particles. The holdup of relatively small bubbles increased with an increase in the gas velocity or solid particle size, while it decreased slightly with an increase in the liquid velocity. The holdups of two kinds of bubbles were well correlated in terms of operating variables within this experimental conditions, respectively.

• Membrane Journal
• /
• v.24 no.3
• /
• pp.194-200
• /
• 2014

The purpose of this study was to evaluate the performance of newly developed Large Pore Micro-Filtration (LPMF) membrane in Lab size for the application of water treatment, and to find its problems with solutions. The out-to-inside filtration hollow fiber LPMF membrane of which average pore size was $5{\mu}m$ was used at this study and its material was the PET braid reinforced PVDF. Filtration tests were done through gravity with 30 cm water head difference or pressure below 1.5 bar, and the backwash was done instantaneously with the filtrate after pressurizing it to about 4 bar. The water flux of the LPMF membrane with 0.2 bar TMP (Trans Membrane Pressure) was 2 times higher than $0.4{\mu}m$ MF membrane with $0.05{\mu}m$ UF filtrate of the tap water and it was measured also with 20~30 cm water head difference which showed over 800 LMH at 30 cm water head difference. And Time-To-Filter (TTF) was performed by using $5{\mu}m$ filter paper to optimize coagulants and dosage which enhanced filtrate's turbidity and stabilized filtration flux. When the LPMF was operated with 30 cm gravity with very high dose of inorganic coagulants, the flux was maintained over 80 LMH with 93.5~99.5% turbidity removal. Especially, the filtration was maintained stably in the flux and about 97% of the recovery rate by instantaneous pressurized backwash with about 4 bar of the filtrate when the packing density was about 19%. But there was instability in filtration, since the TMP was continuously going up by inefficient backwash when the packing density was 43%.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.433-439
• /
• 2009

The compressed packer device is designed to improve the underground contamination prevention facilities of ground water wells. As for the device, the installation is simple because of the safety lock device and the compression of the casing are simple the installation is simple. There is no leakage of ground water because the pressure resistance with $4.5\;kg/cm^2$ makes it equipped with the watertightness The single casing is installed and the reaming for grouting is possible with 300 mm excavation so that installation cost can be saved. Silicon rubber is used for the compressed packer so that the extension rate is 590%. In terms of environmental pollution, it is an environmental friendly product which does not contain harmful ingredients such as Pb, Cd, and phenol. below the standard or undetectable level Furthermore, the installation costs are 35 to 62% or lower than the conventional grouting construction method and are 87% or lower than the expansion packer construction method, the new environmental technology No.47 Also, the device is designed to meet the relevant regulations such as Rules on Preserving the Ground Water Quality, The Standard on Jeju Island Ground Water Development and Facility Installation and Management, and The Plan and Guideline on Operating and Managing the Small-Scale Tap Water Facilities of Ministry of Environment and Ministry of Food, Agriculture, Forestry and Fisheries.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.537-543
• /
• 2011

The reduction factor of pesticides is getting more crucial these days. However, most studies have focused on the relationship between pesticides and commodities. This study was conducted to examine the pesticide reduction factor based on their physicochemical properties. Five pesticides were selected among 288 insecticides by considering the presence of an ionizable group, the log P, and boiling points. The correlation coefficients between log P and removal by tap water, 5% acetic acid, 20% ethanol, and 0.15% detergent were -0.835 (p<0.001), 0.336 (p=0.221), 0.659 (p<0.01), and -0.939 (p<0.001), respectively. Removal by blanching was affected by log P as it showed a positive correlation with a log P of 0.620 (p<0.05). Removal by frying showed a strong negative correlation with a log P of -0.913 (p<0.001). The results suggest that removing pesticides was affected largely by log P and by vapor pressure during cooking, whereas during washing, the matrix of the food also contributed to the reduction.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.438-446
• /
• 1999

The optimum analytical method of aldehydes, ozone by-products, was established by reverse phase liquid chromatography. Six aldehydes including formaldehyde, acetaldehyde, acrolein, propionaldehyde, butylaldehyde and benzaldehyde, and one ketone including acetone were selected as aldehyde test samples through preliminary experiments. Such analytical conditions as the pH of citrate buffer solution, reaction temperature, reaction time, and concentration of DNPH, the component and composition of desorption solvent were optimized. As the result, pH 3.0 of citrate buffer solution, 40$^{\circ}C$ of reaction temperature, 15 minutes of reaction time, and 0.012% of DNPH concentration were chosen as optimum conditions. Aldehydes-DNPH derivatives in water were concentrated on $C_18$ Sep-Pak cartridge and followed by elution of their derivatives fraction with THF/ACN(70/30) mixture, and showed recoveries of the range from 87 to 107%. Separation condition on Nova-Pak $C_18$ column with low pressure gradient elution from ACN/MeOH/water(30/10/60) of an initial condition to 80% ACN of a final condition was found to give a good resolution within 20 minutes of run time. 86% to 103% of recovery for aldehydes using this method was similar to that for aldehyde using EPA Method 554 which is ranged from 84% to 103%.